Just wonted to pop by and say that i have a RB750 r2 (hEX lite) and is working lovely with LEDE snapshot build at the moment, I have tryed the stable LEDE 17.01.1 but no joy on this as it gived me non-working LAN ports!
At the moment the LEDE snapshot builds shows the USR LED is flashing away, Anyone eles have the same issue on other models? or is it becouse i still have it running in the RAM? (initramfs)
I have decided to go for the sysupgrade bit, However i get this error but i waited for about 1 min and then i see the LEDs at the top come back on so i have no idea what went on? So would anyone recommend me to do a "mtd erase firmware" and then sysupgrade lede-ar71xx-mikrotik-rb-nor-flash-16M-squashfs-sysupgrade.bin etc?
I have unplugged my RB750 r2 heX lte from the power and back on again so is definitely stored, Installed LuCI fine no issues.
Reboot (SNAPSHOT, r4049-9412fc2) the snapshot build dated 27/04/2017
root@LEDE:/tmp# sysupgrade lede-ar71xx-mikrotik-rb-nor-flash-16M-squashfs-sysupgrade.bin
Cannot save config while running from ramdisk.
killall: watchdog: no process killed
Unlocking firmware ...
Erasing firmware ...
Sending TERM to remaining processes ... udhcpc odhcp6c ntpd dnsmasq ubusd askfirst logd netifd odhcpd
Sending KILL to remaining processes ... askfirst
Performing system upgrade...
Unlocking firmware ..
Writing from <stdin> to firmware ...
Appending jffs2 data from /tmp/sysupgrade.tgz to firmware..
.File /tmp/sysupgrade.tgz does not exist
umount: can't unmount /dev/pts: Resource busy
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
umount: can't unmount /: Invalid argument
Everything seems to be fine according to LEDE bug system report
https://bugs.lede-project.org/index.php … ask_id=741
(Last edited by francisuk on 2 May 2017, 16:06)