Hi!
Maybe someone have get JTAG for linksys EA6200 ?
i have one with NVRAM erased and now i cant brake in CFE>
Looks like mtd0 is flushed .... 
Topic: Linksys EA6200 JTAG
The content of this topic has been archived on 23 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
Help!
anyone !?
Instruction set ARM
Sub Instruction Set ARMv7-A
Bootloader CFE
Target bcm53xx
System-On-Chip Broadcom BCM47081
CPU MHz 800
Flash MB 128NAND
RAM MB 128
I have TUMPA V2 and solder JTAG pins ... i get out:
adapter speed: 7500 kHz
Warn : Using DEPRECATED interface driver 'ft2232'
Info : Consider using the 'ftdi' interface driver, with configuration files in interface/ftdi/...
Info : device: 6 "2232H"
Info : deviceID: 67340952
Info : SerialNumber: TI88NL5A
Info : Description: TIAO USB Multi-Protocol Adapter A
Info : max TCK change to: 30000 kHz
Info : clock speed 7500 kHz
Warn : There are no enabled taps. AUTO PROBING MIGHT NOT WORK!!
Info : JTAG tap: auto0.tap tap/device found: 0x202bf17f (mfg: 0x0bf, part: 0x02bf, ver: 0x2)
Warn : AUTO auto0.tap - use "jtag newtap auto0 tap -irlen 3 -expected-id 0x202bf17f"
Warn : gdb services need one or more targets defined
(Last edited by pudis00 on 16 Mar 2016, 16:21)
The discussion might have continued from here.
Page 1 of 1