Oh really,

I don't see it on my device.
Did you do anything special?
  E.g. did you compile yourself or was it working out of the box?

br
  Arne

Ok, got it working by myself,

just were missing to
modprobe libata
modprobe ahci

Hi, just received a pair of those routers. Tried to install the trunk at snapshots/trunk/ramips/mt7621/openwrt-ramips-mt7621-zbt-wg3526-squashfs-sysupgrade.bin

It seems isn't working. There is any previous release that it is working with both Wifi interfaces and also the LEDs ?

I tried to find the Allnet version, but didn't found a link for it.

I will like to use the latest Chaos Calmer 15.05.1

Thanks !

From time to time, I'm getting this:

[ 7109.330000] WARNING: CPU: 0 PID: 3618 at /store/buildbot/slave/ramips.mt7621/build/build_dir/target-mipsel_1004kc+dsp_musl-1.1.15/linux-ramips_mt7621/mt76-2016-06-17/mt7603_mac.c:1205 mt7603_mac_work+0x204/0x27c [mt7603e]()
[ 7109.350000] Modules linked in: pppoe ppp_async iptable_nat pptp pppox ppp_mppe ppp_generic nf_nat_pptp nf_nat_ipv4 nf_nat_amanda nf_conntrack_pptp nf_conntrack_ipv6 nf_conntrack_ipv4 nf_conntrack_amanda ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda ts_kmp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_nat_h323 nf_nat_ftp nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack_broadcast nf_conntrack iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt sch_teql sch_tbf sch_sfq sch_red sch_prio sch_pie sch_htb sch_gred sch_fq sch_dsmark sch_codel em_text em_nbyte em_meta em_cmp cls_basic act_police act_ipt act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_hfsc sch_ingress mt7603e mt76x2e mt76 mac80211 cfg80211 compat ledtrig_usbdev ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables msdos ip_gre gre ifb sit tunnel6 tunnel4 ip_tunnel tun vfat fat nls_iso8859_1 nls_cp437 sha1_generic ecb usb_storage ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod ext4 jbd2 mbcache aead crypto_null crypto_hash leds_gpio xhci_mtk xhci_plat_hcd xhci_pci xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
[ 7109.510000] CPU: 0 PID: 3618 Comm: kworker/u8:1 Not tainted 4.4.14 #1
[ 7109.510000] Workqueue: phy1 mt7603_mac_work [mt7603e]
[ 7109.510000] Stack : 8eab1e00 80480000 803fa4f4 000004b5 8ef8d258 00000000 8f804614 8eab1e18
[ 7109.510000]       00000088 80063514 803fa4f4 00000000 00000e22 804d365c 80415e88 8e697d54
[ 7109.510000]       80480000 8006129c 80480000 804f0000 80484378 8048437c 803fee08 8e697d54
[ 7109.510000]       80480000 80040ea8 8f804614 8e697d8c 0000050d 00000000 00000000 00697d74
[ 7109.510000]       8ef8d054 8fbd0300 8fbd0a00 31796870 00000000 00000000 00000000 00000000
[ 7109.510000]       ...
[ 7109.510000] Call Trace:
[ 7109.510000] [<80016698>] show_stack+0x50/0x84
[ 7109.510000] [<801b17b8>] dump_stack+0x84/0xbc
[ 7109.510000] [<8002be10>] warn_slowpath_common+0xa0/0xd0
[ 7109.510000] [<8002bec4>] warn_slowpath_null+0x18/0x24
[ 7109.510000] [<8ef8d258>] mt7603_mac_work+0x204/0x27c [mt7603e]
[ 7109.510000] [<8003eb08>] process_one_work+0x214/0x358
[ 7109.510000] [<8003f9f0>] worker_thread+0x2dc/0x444
[ 7109.510000] [<80044130>] kthread+0xdc/0xe8
[ 7109.510000] [<80005478>] ret_from_kernel_thread+0x14/0x1c
[ 7109.510000]
[ 7109.610000] ---[ end trace e32dece355902222 ]---

Any idea of what is the problem?

Has anyone here has trouble with reboots?  When I enter reboot, or sysupgrade it shuts down but did not come back up.  I have to unplug and plug back in.

Can someone tell me the address space locations of:

u-boot
u-boot-env
firmware

I have bricked my wg3526 and it seems i may have to go the JTAG route sinc ehte USB UART serial path doesnt work..i have to assume the bricking killed the boot loader.

And as bonus, if you have any experience with JTAG id love to ask you some questions.

Don't you have the 15.05.1 firmware?
I'd like to use MWan3 and Strongswan but the 15.05 doens't have these modules available.