My understanding is that SQM flowoffload does work with SW, just not HW.
Topic: davidc502 1900ac 3200acm builds
The content of this topic has been archived between 26 Feb 2018 and 7 May 2018. Unfortunately there are posts – most likely complete pages – missing.
Page 227 of 229
Chadster766 wrote:
Villeneuve wrote:rango != wrt32x, some headway being made .
FYI
You can convert your WRT32X to a WRT3200ACM and load OpenWRT following the below instructions. If you are going to load base OpenWRT instead of davidc502 then I recommend the OpenWRT development snapshot.
actualy i modified the last @davidc502 build for wrt3200acm and make it working on wrt32x. i posted the patched image here dd-wrt.com/phpBB2/viewtopic.php?t=312139&postdays=0&postorder=asc&start=120 (hope @davidc502 doesnt mind). a user reported that it is working ok on wrt32x.
if @davidc502 is interested i can post what i changed, so he can build working wrt32x build (it is only a partition layout change in DTS).
(Last edited by andyVSR on 30 Apr 2018, 19:34)
To 1900ac V1 owners --
Please report back your findings on FLOWOFFLOAD, and if there is an increase in download/upload speed after implementing the change.
andyVSR wrote:
Chadster766 wrote:Villeneuve wrote:rango != wrt32x, some headway being made .
FYI
You can convert your WRT32X to a WRT3200ACM and load OpenWRT following the below instructions. If you are going to load base OpenWRT instead of davidc502 then I recommend the OpenWRT development snapshot.
actualy i modified the last @davidc502 build for wrt3200acm and make it working on wrt32x. i posted the patched image here dd-wrt.com/phpBB2/viewtopic.php?t=312139&postdays=0&postorder=asc&start=120 (hope @davidc502 doesnt mind). a user reported that it is working ok on wrt32x.
if @davidc502 is interested i can post what i changed, so he can build working wrt32x build (it is only a partition layout change in DTS).
Sounds good --
I'm not sure how or if I could apply the changes, but appreciate if you could share what you did.
Best regards,
in this image with red is the modified values and with green the old ones.
expirebox.com/download/001245820b91d185a0b8911bed0c9b66.html
kernel uses values passed from DTS and not the one passed by uboot (using mtdparts env var).
(Last edited by andyVSR on 30 Apr 2018, 21:10)
Sorry, posts 5656 to 5675 are missing from our archive.
Page 227 of 229