Hi everybody, and thank you for accepting me on this forum 
.
My problem is that i have a D-LINK Dir 600 B6 modem/router and with the original firmware, i was unable to connect to the internet (pppoe) because i wasn't able to set my ISP VPI/VCI which are 0/38.
Now i successfully flashed it with openwrt thanks to this topic https://forum.openwrt.org/viewtopic.php … 96&p=2
Actually i'm with the openwrt-ramips-rt305x-dir-610-a1-squashfs-sysupgrade.bin
I set all the settings, but now the problem is that i don't have any adsl synchronization: I can set pppoe, my username/pass, vpi/vci, but i cannot find any place where i can see if my adsl line is synchronised or not. I think that the adsl driver of my Dlink dir-600 is not installed with openwrt. I tried to install it but i didn't find any adsl drivers that matchs with my dlink dir 600.
PS: My adsl line also didn't synchonized with the original firmware.
It's been 2 days of intensive search but now i'm absolutely stunned.
Any help would be awesome !! Again thank you very much for your help !!!