Topic: How to enable/disable the watchdog timer?

The content of this topic has been archived on 24 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

sowmyabr

24 Aug 2016, 06:32

Hello,

I am working with LinkIt Smart 7688 with Chaos calmer R49087 version and modified firmware to access watchdog timer.

I am using the following command to set the watchdog timer:

 watchdog -t 5 -T 10 -F /dev/watchdog

But the system is not resetting after 30 seconds.
Do I am missing any package or configuration to enable watchdog?

Regards,
Sowmya

The discussion might have continued from here.

Page 1 of 1