Topic: OLSRD version 0.4.10-1 causes DMZ LED (WRT54G) to stay permanently ON

The content of this topic has been archived on 22 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

socrates

17 Aug 2006, 14:16

When I install Olsrd version 0.4.10-1 with either firmware release RC5 or RC4, the DMZ LED stays permanently ON. However, when I use Olsrd 0.4.9-1 the problem disappears.
I tried with my own firmware builds and also the ones download from this site with the same effect.

What is causing this?

I need to provide users with a single firmware file, and I currenlty using the RC5 base. Am I correct to assume RC5 is stable?

I will greatly appreciate your help.

Regards;

Socrates

Post #2

socrates

17 Aug 2006, 15:48

Ok... The solution is to set the DebugLevel to 0.

The discussion might have continued from here.

Page 1 of 1