Please anyone I bought cpe210 its working perfectly on newest trunk January 2017 but I bought another cpe I believe it came from usa or china because my first cpe is UN right now I cant get it to load in the phros page can anyone add the necessary info in the newest firmware so it can be accepted so I can use winscap and putty to flash the upgrade. Can anyone upload the files with the support for my version. When I use putty to upgrade sysupgrade file it said model not in support list

(Last edited by whoof_5 on 14 Jan 2017, 13:28)

Please be patient and don't cross posting. Cross posting is a violation of ToS.

Even your post gets ignored, there is no reasons to cross posting. All you need is to bump your post up.

Just post a follow up here to bump it up every-now-and-then to see if it catches any readers attention to offer some helps to resolve your issues.

Im sure this might be so easy for one of you here. Or can anyone tell me how to compile the bin file with the added support for the cpe router.

Please read this Newcomer's Guide to learn more.

What is the problem? I don't understand you question, what is "UN" ?

Are CPE210 being locked down to prevent flasing OpenWrt?

i believe something like that is needed in the NEW firmware JANUARY 2017 Trunk my second CPE210 i believe its from US or CN

"CPE210(TP-LINK|UN|N300-2):1.1\r\n"
"CPE210(TP-LINK|US|N300-2):1.1\r\n"
"CPE210(TP-LINK|EU|N300-2):1.1\r\n"

My first cpe210 i bought from Cyprus its working fine with openwrt but the second one refuses to upgrade with the openwrt upgrade.sys file through putty. It says device not in support list.

Need someone to upload the compiled trunk because i don't know how to add it to the file

(Last edited by whoof_5 on 10 Jan 2017, 13:47)

Lede works on CPE210 that I tried, that are "EU" while OpenWrt (both CC 15.05.1 and Trunk) fail.

Once patches from Lede come to OpenWrt trunk then OpenWrt will also flash without issues on CPE210.

Here is full serial log from CPE210:
http://pastebin.com/raw/ReYVyeX9

And here are screenshots from trying to flash OpenWrt and Lede to CPE210:
http://imgur.com/a/sDVbQ

You are right Lede works perfect on it im using it right now thanks..