OpenWrt Forum Archive

Topic: Error Flasing TP-LINK MR-3020, I dont know what is broken please Help

The content of this topic has been archived on 27 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
yufandy
20 Feb 2017, 20:49

Error Flasing TP-LINK MR-3020, I dont know what is broken please Help

First I want to change my OpenWrt version of attitude_adjustment 12:09 to chaos_calmer 15.05.1 and always failed after that I took a decree to restore the initial Firmware TP-LINK tl-mr3020 default and even fail as well and to get an error like this.

condition.
if the power port on the plug, the interface Lan unreadable and acces web broser with ip default can not get well and after I hit the reset button light on the modem tp-link die blinking but after the press reset the indicator light hadware die and give instructions to the interface lan legible and after it could not also acces using Browser. ????

I beg help from his friends for solving error on my hadware.

The following video

Post #2
nonametouse
23 May 2017, 09:56

I've got the same issues. Do you already fix it?.

Post #3
ericwongcm
6 Feb 2018, 14:18

Sounds like you have messed up the firmware and most likely can only be fixed using serial connection.

The discussion might have continued from here.