The content of this topic has been archived on 28 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hi, This is my first post. I just want to know if its possible to make OpenWrt for TENDA D303 or 301.
According to my knowledge, Both have the same hardware.
CPU1: Broadcom BCM6318 (333 MHz)
FLA1: 8 MiB (Spansion 25Q64BSIG)
RAM1: 32 MiB (Winbond W9425G6JH-5)
I am currently using D303 model. I coudn't find wiki info for this model so that's why i post wiki info for D301.
Thank-you.
It seems similar to the TP-LINK W8968v3, there's OpenWRT for that router but 802.11n isn't working
It seems similar to the TP-LINK W8968v3, there's OpenWRT for that router but 802.11n isn't working
Hi, Thanks for reply! I just want to know if it's OK to install OpenWrt from another router with same hardware specification like this TP-LINK router you mentioned ?
It may brick the router as the flash aren't the same, the page of those routers on WikiDev aren't so complete sadly.
https://wikidevi.com/wiki/Tenda_D301
https://wikidevi.com/wiki/TP-LINK_TD-W8968_v3
Even the internal are very similar, the W8968v3 https://wiki.openwrt.org/toh/tp-link/tp … -w8960n_v5
(Last edited by Vezexe on 12 May 2017, 14:04)
The discussion might have continued from here.