Hi I'm flash brcm63xx-generic-96368MVNgr-generic-squashfs-cfe.bin and my router now work with openwrt firmware.
Have problem: dont work wifi Can I fix it ?
and some bugs are present: leds on ports 1-4 always off, power led is red only and no way to turn off red and turn on green. Can I fix it?
Topic: ZTE 931 Wii
The content of this topic has been archived on 6 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
wi-fi on, but devices no see.
afon222 wrote:
Have problem: dont work wifi Can I fix it ?
By default, the wireless radio is off on OpenWRT images. You will need to turn it on manually, either from LuCI or by pressing whatever rfkill-switch your router has
afon222 wrote:
and some bugs are present: leds on ports 1-4 always off, power led is red only and no way to turn off red and turn on green. Can I fix it?
You can configure the behavior of the LEDs from LuCI, i.e. when do they lit, how do they lit and what they indicate. Look for a menu item referring to LEDs in the LuCI, and familiarize yourself with https://wiki.openwrt.org/doc/uci/system#leds
I wireless radio is ON, but divices not see my wireless lan name
I wireless radio is ON from LuCI , but divices not see my wireless lan name
Open SSH connection to the router and type 'iw phy'. Paste results of the command here. Then type 'iw dev' and paste the results. When copy-pasting the results, use the <code> formatting element.
These two commands show the physical capabilities of your wireless radio, and the status of any wireless interfaces present.
(Last edited by Antek on 1 Jun 2017, 15:02)
The discussion might have continued from here.
Page 1 of 1