Hello, I have a basic question regarding device profiles. I want to build a custom Archer C20 v1 openwrt firmware, I have already done that for other model of device, the Archer C7 v2 using the Image Generator procedure which worked pretty well. The thing is that despite the fact that the C20 is supported (/toh/tp-link/tp-link_archer_c20_1) there is no such device profile when I download the Image Builder for that architecture (OpenWrt-ImageBuilder-15.05.1-ramips-mt7620.Linux-x86_64). Should I assume that the firmware available for the C20 was built using default profile from the Image Builder?
Topic: Archer C20 Device Profile
The content of this topic has been archived on 5 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
I have exactly the same dude, anyone know the answer?
You are using the image builder for stable release (15.05.1), while the Archer C20 v1 has only snapshot support.
Use the snapshot imagebuilder instead.
The discussion might have continued from here.
Page 1 of 1