Dear OpenWrt community,
I installed the last version available for this router (4.4.14 on snapshots).
My /etc/config/wireless
config wifi-device 'radio0'
option type 'mac80211'
option channel '11'
option hwmode '11g'
option path 'platform/qca956x_wmac'
option htmode 'HT20'
option disabled 1
config wifi-iface
option device 'radio0'
option network 'wlan0'
option mode 'ad-hoc'
option ssid 'openwrt'
option encryption 'none'
option key '1234567890'and my /etc/config/network
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fd79:6c61:2e76::/48'
config interface 'wlan0'
option proto static
option force_link 1
option ipaddr '192.168.1.102'
option netmask '255.255.255.255'
config interface 'lan'
#option type 'bridge'
option ifname 'eth0.1'
option proto 'static'
option ipaddr '192.168.0.1'
option netmask '255.255.255.0'
option ip6assign '60'
config interface 'wan'
option ifname 'eth0.2'
option proto 'dhcp'
config interface 'wan6'
option ifname 'eth0.2'
option proto 'dhcpv6'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '1 2 3 4 0t'
config switch_vlan
option device 'switch0'
option vlan '2'
option ports '5 0t'I have two issues I don't understand.
1.\
When I set
option disabled 1in
/etc/config/wireless/
iw devreturns the Interface wlan0. and when I set
option disabled 0it doesn't detect any wireless interface. It seems to me it should be the opposite ?
2.\
The wireless interface does not get its own IP adress, nor does it connect to the ad-hoc network. I don't get where the trouble might be.
(Last edited by koko12 on 14 Sep 2017, 10:50)