I recompile at this time with this config.seed :

CONFIG_TARGET_ramips=y
CONFIG_TARGET_ramips_mt7620=y
CONFIG_TARGET_ramips_mt7620_DEVICE_u25cwf
CONFIG_LUCI_LANG_en=y
CONFIG_LUCI_LANG_fr=y
CONFIG_PACKAGE_SAMBA_MAX_DEBUG_LEVEL=-1
CONFIG_PACKAGE_blkid=y
CONFIG_PACKAGE_block-mount=y
CONFIG_PACKAGE_blockd=y
CONFIG_PACKAGE_chat=y
CONFIG_PACKAGE_comgt=y
CONFIG_PACKAGE_ddns-scripts=y
CONFIG_PACKAGE_hd-idle=y
CONFIG_PACKAGE_igmpproxy=y
CONFIG_PACKAGE_ip-bridge=y
CONFIG_PACKAGE_ip-full=y
CONFIG_PACKAGE_ipip=y
CONFIG_PACKAGE_kmod-crypto-crc32c=y
CONFIG_PACKAGE_kmod-crypto-hash=y
CONFIG_PACKAGE_kmod-fs-autofs4=y
CONFIG_PACKAGE_kmod-fs-exfat=y
CONFIG_PACKAGE_kmod-fs-ext4=y
CONFIG_PACKAGE_kmod-fs-vfat=y
CONFIG_PACKAGE_kmod-fuse=y
CONFIG_PACKAGE_kmod-gpio-dev=y
CONFIG_PACKAGE_kmod-ipip=y
CONFIG_PACKAGE_kmod-ipt-compat-xtables=y
CONFIG_PACKAGE_kmod-ipt-conntrack-extra=y
CONFIG_PACKAGE_kmod-ipt-filter=y
CONFIG_PACKAGE_kmod-ipt-hashlimit=y
CONFIG_PACKAGE_kmod-ipt-iface=y
CONFIG_PACKAGE_kmod-ipt-ipmark=y
CONFIG_PACKAGE_kmod-ipt-ipopt=y
CONFIG_PACKAGE_kmod-ipt-ipset=y
CONFIG_PACKAGE_kmod-ipt-nat-extra=y
CONFIG_PACKAGE_kmod-ipt-nathelper-rtsp=y
CONFIG_PACKAGE_kmod-ipt-u32=y
CONFIG_PACKAGE_kmod-iptunnel=y
CONFIG_PACKAGE_kmod-iptunnel4=y
CONFIG_PACKAGE_kmod-ledtrig-default-on=y
CONFIG_PACKAGE_kmod-ledtrig-gpio=y
CONFIG_PACKAGE_kmod-ledtrig-heartbeat=y
CONFIG_PACKAGE_kmod-ledtrig-netdev=y
CONFIG_PACKAGE_kmod-lib-crc16=y
CONFIG_PACKAGE_kmod-lib-textsearch=y
CONFIG_PACKAGE_kmod-mii=y
CONFIG_PACKAGE_kmod-nfnetlink=y
CONFIG_PACKAGE_kmod-nls-base=y
CONFIG_PACKAGE_kmod-nls-cp437=y
CONFIG_PACKAGE_kmod-nls-iso8859-1=y
CONFIG_PACKAGE_kmod-nls-utf8=y
CONFIG_PACKAGE_kmod-scsi-cdrom=y
CONFIG_PACKAGE_kmod-scsi-core=y
CONFIG_PACKAGE_kmod-usb-core=y
CONFIG_PACKAGE_kmod-usb-ehci=y
CONFIG_PACKAGE_kmod-usb-net=y
CONFIG_PACKAGE_kmod-usb-net-cdc-ether=y
CONFIG_PACKAGE_kmod-usb-net-qmi-wwan=y
CONFIG_PACKAGE_kmod-usb-net-rndis=y
CONFIG_PACKAGE_kmod-usb-net-sierrawireless=y
CONFIG_PACKAGE_kmod-usb-ohci=y
CONFIG_PACKAGE_kmod-usb-printer=y
CONFIG_PACKAGE_kmod-usb-serial=y
CONFIG_PACKAGE_kmod-usb-serial-option=y
CONFIG_PACKAGE_kmod-usb-serial-wwan=y
CONFIG_PACKAGE_kmod-usb-storage=y
CONFIG_PACKAGE_kmod-usb-storage-extras=y
CONFIG_PACKAGE_kmod-usb-uhci=y
CONFIG_PACKAGE_kmod-usb-wdm=y
CONFIG_PACKAGE_kmod-usb2=y
CONFIG_PACKAGE_kmod-usb2-pci=y
CONFIG_PACKAGE_kmod-usb3=y
CONFIG_PACKAGE_libblkid=y
CONFIG_PACKAGE_libbz2=y
CONFIG_PACKAGE_libexif=y
CONFIG_PACKAGE_libffmpeg-mini=y
CONFIG_PACKAGE_libflac=y
CONFIG_PACKAGE_libid3tag=y
CONFIG_PACKAGE_libiwinfo-lua=y
CONFIG_PACKAGE_libjpeg=y
CONFIG_PACKAGE_liblua=y
CONFIG_PACKAGE_libncurses=y
CONFIG_PACKAGE_libogg=y
CONFIG_PACKAGE_libreadline=y
CONFIG_PACKAGE_librt=y
CONFIG_PACKAGE_libsqlite3=y
CONFIG_PACKAGE_libubus-lua=y
CONFIG_PACKAGE_libuci-lua=y
CONFIG_PACKAGE_libuuid=y
CONFIG_PACKAGE_libvorbis=y
CONFIG_PACKAGE_lua=y
CONFIG_PACKAGE_luci=y
CONFIG_PACKAGE_luci-app-ddns=y
CONFIG_PACKAGE_luci-app-firewall=y
CONFIG_PACKAGE_luci-app-hd-idle=y
CONFIG_PACKAGE_luci-app-minidlna=y
CONFIG_PACKAGE_luci-app-p910nd=y
CONFIG_PACKAGE_luci-app-samba=y
CONFIG_PACKAGE_luci-app-upnp=y
CONFIG_PACKAGE_luci-base=y
CONFIG_PACKAGE_luci-i18n-base-en=y
CONFIG_PACKAGE_luci-i18n-base-fr=y
CONFIG_PACKAGE_luci-i18n-ddns-fr=y
CONFIG_PACKAGE_luci-i18n-firewall-en=y
CONFIG_PACKAGE_luci-i18n-firewall-fr=y
CONFIG_PACKAGE_luci-i18n-hd-idle-en=y
CONFIG_PACKAGE_luci-i18n-hd-idle-fr=y
CONFIG_PACKAGE_luci-i18n-minidlna-en=y
CONFIG_PACKAGE_luci-i18n-minidlna-fr=y
CONFIG_PACKAGE_luci-i18n-p910nd-en=y
CONFIG_PACKAGE_luci-i18n-p910nd-fr=y
CONFIG_PACKAGE_luci-i18n-samba-en=y
CONFIG_PACKAGE_luci-i18n-samba-fr=y
CONFIG_PACKAGE_luci-i18n-upnp-en=y
CONFIG_PACKAGE_luci-i18n-upnp-fr=y
CONFIG_PACKAGE_luci-lib-httpclient=y
CONFIG_PACKAGE_luci-lib-ip=y
CONFIG_PACKAGE_luci-lib-json=y
CONFIG_PACKAGE_luci-lib-jsonc=y
CONFIG_PACKAGE_luci-lib-nixio=y
CONFIG_PACKAGE_luci-mod-admin-full=y
CONFIG_PACKAGE_luci-proto-3g=y
CONFIG_PACKAGE_luci-proto-ipip=y
CONFIG_PACKAGE_luci-proto-ipv6=y
CONFIG_PACKAGE_luci-proto-ppp=y
CONFIG_PACKAGE_luci-proto-relay=y
CONFIG_PACKAGE_luci-theme-bootstrap=y
CONFIG_PACKAGE_luci-theme-material=y
CONFIG_PACKAGE_minidlna=y
CONFIG_PACKAGE_miniupnpd=y
CONFIG_PACKAGE_ntfs-3g=y
CONFIG_PACKAGE_p910nd=y
CONFIG_PACKAGE_relayd=y
CONFIG_PACKAGE_resolveip=y
CONFIG_PACKAGE_rpcd=y
CONFIG_PACKAGE_rpcd-mod-rrdns=y
CONFIG_PACKAGE_samba36-client=y
CONFIG_PACKAGE_samba36-net=y
CONFIG_PACKAGE_samba36-server=y
CONFIG_PACKAGE_terminfo=y
CONFIG_PACKAGE_uhttpd=y
CONFIG_PACKAGE_uhttpd-mod-ubus=y
CONFIG_PACKAGE_zlib=y

------------------

I can share HDD ( tested vfat and ntfs )

Only problem with 3 * box' s in relay mode and minidlna not solved

(Last edited by F5BJR on 14 Feb 2018, 12:12)

wow-new interface! looks nice.
is ther any packets specific repository to point to to have no conflicts when I try adding codepages cp866 win1251 and koi8r

Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-nls-koi8r:
 *     kernel (= 4.9.70-1-d6c20afe2add5085a86c349b02c22797) * 
 * opkg_install_cmd: Cannot install package kmod-nls-koi8r.

Great! Thank you. Looking forward to trying it at night.

Could you please confirm or decline my conclusions about the device:
- it has owful stock firmware and to discover all advantages of the hardware it is a good idea to flash it to lede owrt;
- hdd to usb conversion works perfectly;
- hdd over WiFi works slowly at most speed of 1,5mbytes per second and only in open WiFi mode;
- if any of wep/WPA/wpa2 protection used hdd over air speed falls down to 15-40 kbytes per second;
- hdd connected to local wifi home network over WiFi (which has to be a wpa2 for security reason) is not functional as NAS;
So we still have a perfect sata2usb3 box with ability to act as separate unprotected network NAS (like taking it on a trip as photobank with wifi);
- as owrt based system it is very powerful in the range of available options but HDD WiFi limitations make them hardly useful

I use with WPA2 protected in relay mode

Speed transfert is  some 3 Mo/s ( video file )

Lan Computer <-> Router <-> WNR3500 WIFI Tomato firmware <-> BS-U25CWF

BS-U25CWF <-> ... Computer : The same speed

The speed is the same for My Computer <-> WNR3500

In only HDD mode ( direct USB3 ) speed is fine as normal HDD / SSD enclosure box

(Last edited by F5BJR on 25 Dec 2017, 22:12)

hmmm, sounds sweet :-)
Either crooky hands of mine or my device is buggy.
BTW, when I ping this device the delay time is very unstable ( varies from 54 to 2000 ms).
When I read/write over SMB to HDD, it blinks shortly with blue light than blinks red for 20-30 seconds and than again a couple of blue blinks: this looks like it takes a slice of my file and pushes it over wifi with great difficulty. But this definately does not look like HDD itself has problems: the transfer speed is very slow even when I copy  a small file to/from internal on-chip owrt system space.

I have one idea to check: in the picture https://www.hostingpics.net/viewer.php? … ALPORT.jpg the black GND wire is attached to a spot on the plate, but I have a junction occurred between this spot and metal body of USB interface, which is close to it. Previously I decided it should be just the same GND, but currently I am no longer sure that was safe. Will try to weld again

(Last edited by vadim245 on 26 Dec 2017, 13:19)

1 - this box requiert sufficient power > 1.5 A

2 - in HDD/USB3 mode use a normal USB3 cable ( speed transfert is some 80 Mo/s with a mechanical HDD )

3 - in wifi mode only a cable connected to a power supply , not to a computer USB2/3 port

(Last edited by F5BJR on 27 Dec 2017, 09:14)

1. =2.4A (real)
2. yes, very close to this  in my case too
3. will try to meet this requirement and test it again

+ will try re-solder black wire attachment point

I am almost giving up :-(Transfer speed is just over 3.1Mb/sec in SMB (HDD to PC over WiFi ), but only if I have Kimax as an access point (192.168.1.1). As soon as I use this manual http://trac.gateworks.com/wiki/OpenWrt/wireless/relayd to relayd (my home network  router Mikrotik is 192.168.10.1 and it gives an ip 192.168.10.133 to Kimax),  SMB disappears until I add [Option Interface 192.168.10.133] parameter to smb configuration file. Than smb appears in my home network, but transfer rate  is 32-54kbytes/sec or less(!)

It looks like there is an error in the above manual or something is getting wrong with smb when I switch Kimax from access point mode to relay one.

I use the box in relayd mode and no problem

my configuration

network :

config interface 'loopback'
    option ifname 'lo'
    option proto 'static'
    option ipaddr '127.0.0.1'
    option netmask '255.0.0.0'

config globals 'globals'
    option ula_prefix 'fd6c:739e:cff3::/48' < ???

config interface 'lan'
    option type 'bridge'
    option ifname 'eth0'
    option proto 'static'
    option netmask '255.255.255.0'
    option ip6assign '60'
    option gateway '192.168.1.1'   < - my lan router SRX5308
    option dns '8.8.8.8 192.168.1.1'
    option ipaddr '192.168.2.242' < lan box ip not used

config interface 'wwan'
    option _orig_ifname 'wlan0'
    option _orig_bridge 'false'
    option proto 'static'
    option netmask '255.255.255.0'
    option gateway '192.168.1.1'
    option dns '8.8.8.8 192.168.1.1'
    option ipaddr '192.168.1.242' < wwan ip box 

config interface 'stabridge'
    option proto 'relay'
    list network 'lan'
    list network 'wwan'

wireless:

config wifi-device 'radio0'
    option type 'mac80211'
    option channel '10'
    option hwmode '11g'
    option path 'platform/10180000.wmac'
    option htmode 'HT20'
    option disabled '0'
    option country 'FR'

config wifi-iface 'default_radio0'
    option device 'radio0'
    option network 'lan'
    option mode 'ap'
    option encryption 'psk-mixed'
    option key '1234567890'   < - my password
    option wpa_disable_eapol_key_retries '1'
    option ssid 'U25AWF-H1-242' < my box separate name for WIFI

config wifi-iface
    option network 'wwan'
    option encryption 'psk2'
    option device 'radio0'
    option mode 'sta'
    option bssid 'E0:12:34:56:78:90' <- TOMATO MAC change this
    option key '1234567890' < - TOMATO password
    option ssid 'TOMATO' < - TOMATO SSID

dhcp:

config dnsmasq
    option domainneeded '1'
    option boguspriv '1'
    option filterwin2k '0'
    option localise_queries '1'
    option rebind_protection '1'
    option rebind_localhost '1'
    option local '/lan/'
    option domain 'lan'
    option expandhosts '1'
    option nonegcache '0'
    option authoritative '1'
    option readethers '1'
    option leasefile '/tmp/dhcp.leases'
    option resolvfile '/tmp/resolv.conf.auto'
    option nonwildcard '1'
    option localservice '1'

config dhcp 'lan'
    option interface 'lan'
    option dhcpv6 'server'
    option ra 'server'
    option ignore '1'
    option ra_management '1'

config dhcp 'wan'
    option interface 'wan'
    option ignore '1'

config odhcpd 'odhcpd'
    option maindhcp '0'
    option leasefile '/tmp/hosts/odhcpd'
    option leasetrigger '/usr/sbin/odhcpd-update'
    option loglevel '4'

firewall:

config defaults
    option syn_flood '1'
    option input 'ACCEPT'
    option output 'ACCEPT'
    option forward 'REJECT'

config zone
    option name 'lan'
    option input 'ACCEPT'
    option output 'ACCEPT'
    option forward 'ACCEPT'
    option network 'lan wwan'

config zone
    option name 'wan'
    option input 'REJECT'
    option output 'ACCEPT'
    option forward 'REJECT'
    option masq '1'
    option mtu_fix '1'
    option network 'wan wan6'

config forwarding
    option src 'lan'
    option dest 'wan'

config rule
    option name 'Allow-DHCP-Renew'
    option src 'wan'
    option proto 'udp'
    option dest_port '68'
    option target 'ACCEPT'
    option family 'ipv4'

config rule
    option name 'Allow-Ping'
    option src 'wan'
    option proto 'icmp'
    option icmp_type 'echo-request'
    option family 'ipv4'
    option target 'ACCEPT'

config rule
    option name 'Allow-IGMP'
    option src 'wan'
    option proto 'igmp'
    option family 'ipv4'
    option target 'ACCEPT'

config rule
    option name 'Allow-DHCPv6'
    option src 'wan'
    option proto 'udp'
    option src_ip 'fc00::/6'
    option dest_ip 'fc00::/6'
    option dest_port '546'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-MLD'
    option src 'wan'
    option proto 'icmp'
    option src_ip 'fe80::/10'
    list icmp_type '130/0'
    list icmp_type '131/0'
    list icmp_type '132/0'
    list icmp_type '143/0'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-ICMPv6-Input'
    option src 'wan'
    option proto 'icmp'
    list icmp_type 'echo-request'
    list icmp_type 'echo-reply'
    list icmp_type 'destination-unreachable'
    list icmp_type 'packet-too-big'
    list icmp_type 'time-exceeded'
    list icmp_type 'bad-header'
    list icmp_type 'unknown-header-type'
    list icmp_type 'router-solicitation'
    list icmp_type 'neighbour-solicitation'
    list icmp_type 'router-advertisement'
    list icmp_type 'neighbour-advertisement'
    option limit '1000/sec'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-ICMPv6-Forward'
    option src 'wan'
    option dest '*'
    option proto 'icmp'
    list icmp_type 'echo-request'
    list icmp_type 'echo-reply'
    list icmp_type 'destination-unreachable'
    list icmp_type 'packet-too-big'
    list icmp_type 'time-exceeded'
    list icmp_type 'bad-header'
    list icmp_type 'unknown-header-type'
    option limit '1000/sec'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-IPSec-ESP'
    option src 'wan'
    option dest 'lan'
    option proto 'esp'
    option target 'ACCEPT'

config rule
    option name 'Allow-ISAKMP'
    option src 'wan'
    option dest 'lan'
    option dest_port '500'
    option proto 'udp'
    option target 'ACCEPT'

config include
    option path '/etc/firewall.user'

config include 'miniupnpd'
    option type 'script'
    option path '/usr/share/miniupnpd/firewall.include'
    option family 'any'
    option reload '1'

samba:

config samba
    option workgroup 'WORKGROUP'
    option homes '1'
    option friendly_name 'LEDE-242 Server'
    option interface 'br-lan,eth0,wlan0'
    option description 'KIMAX-BS-U25AWF-H1-242'
    option name 'U25-AWF-H1-242'

config sambashare
    option browseable 'yes'
    option name 'A'
    option path '/mnt/sda1'
    option read_only 'no'
    option guest_ok 'yes'

(Last edited by F5BJR on 31 Jan 2018, 21:30)

Can not see errors that could downgrade wifi speed in bridged connection of LAN and WWAN:

network :

config interface 'loopback'
    option ifname 'lo'
    option proto 'static'
    option ipaddr '127.0.0.1'
    option netmask '255.0.0.0'

config globals 'globals'
    option ula_prefix 'fdae:4faf:33a3::/48'

config interface 'lan'
    option type 'bridge'
    option proto 'static'
    option ipaddr '192.168.1.1'    << Kimax WIFI Box IP address when it acts as access point
    option netmask '255.255.255.0'
    option ip6assign '60'
    option gateway '192.168.10.1' << My home router IP
    option dns '8.8.8.8 192.168.10.1'  << Google IP and My home router IP as dns servers
    option _orig_ifname 'eth0 wlan0-1'
    option _orig_bridge 'true'
    option delegate '0'

config device 'lan_dev'   <<have no idea what this and  the next line mean
    option name 'eth0'  

config interface 'wwan'
    option _orig_ifname 'wlan0'
    option _orig_bridge 'false'
    option proto 'static'
    option netmask '255.255.255.0'
    option gateway '192.168.10.1'  << My home router IP
    option dns '8.8.8.8 192.168.10.1'
    option ipaddr '192.168.10.130'  << this is the IP my router gave to Kimax HDD box
    option delegate '0'

config interface 'stabridge'
    option proto 'relay'
    list network 'lan'
    list network 'wwan'
    option delegate '0'  



wireless:

config wifi-device 'radio0'
    option type 'mac80211'
    option hwmode '11g'
    option path 'platform/10180000.wmac'
    option disabled '0'
    option channel '9'
    option htmode 'HT40'
    option country 'FR'   << does not influence could be 00 or RU

config wifi-iface 'default_radio0'
    option device 'radio0'
    option mode 'ap'
    option encryption 'psk-mixed'
    option key 'myPassword123'    << the password to access Kimax directly as access point
    option wpa_disable_eapol_key_retries '1'
    option ssid 'LEDE'
    option network 'lan'

config wifi-iface
    option network 'wwan'
    option ssid 'zyxel245'  <<< my  home router SSID
    option encryption 'psk2'
    option device 'radio0'
    option mode 'sta'
    option bssid 'D4:CA:6D:A3:BC:87'
    option key 'myPassword123' <<<my home router password
 



dhcp:

config dnsmasq
    option domainneeded '1'
    option localise_queries '1'
    option rebind_protection '1'
    option rebind_localhost '1'
    option local '/lan/'
    option domain 'lan'
    option expandhosts '1'
    option authoritative '1'
    option readethers '1'
    option leasefile '/tmp/dhcp.leases'
    option resolvfile '/tmp/resolv.conf.auto'
    option nonwildcard '1'
    option localservice '1'

config dhcp 'lan'
    option interface 'lan'
    option dhcpv6 'server'
    option ra 'server'
    option ignore '1'
    option ra_management '1'

config dhcp 'wan'
    option interface 'wan'
    option ignore '1'

config odhcpd 'odhcpd'
    option maindhcp '0'
    option leasefile '/tmp/hosts/odhcpd'
    option leasetrigger '/usr/sbin/odhcpd-update'
    option loglevel '4' 



firewall:

config defaults
    option syn_flood '1'
    option input 'ACCEPT'
    option output 'ACCEPT'
    option forward 'REJECT'

config zone
    option name 'lan'
    option input 'ACCEPT'
    option output 'ACCEPT'
    option forward 'ACCEPT'
    option network 'lan wwan stabridge'

config zone
    option name 'wan'
    option input 'REJECT'
    option output 'ACCEPT'
    option forward 'REJECT'
    option masq '1'
    option mtu_fix '1'
    option network 'wan wan6'

config forwarding
    option src 'lan'
    option dest 'wan'

config rule
    option name 'Allow-DHCP-Renew'
    option src 'wan'
    option proto 'udp'
    option dest_port '68'
    option target 'ACCEPT'
    option family 'ipv4'

config rule
    option name 'Allow-Ping'
    option src 'wan'
    option proto 'icmp'
    option icmp_type 'echo-request'
    option family 'ipv4'
    option target 'ACCEPT'

config rule
    option name 'Allow-IGMP'
    option src 'wan'
    option proto 'igmp'
    option family 'ipv4'
    option target 'ACCEPT'

config rule
    option name 'Allow-DHCPv6'
    option src 'wan'
    option proto 'udp'
    option src_ip 'fc00::/6'
    option dest_ip 'fc00::/6'
    option dest_port '546'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-MLD'
    option src 'wan'
    option proto 'icmp'
    option src_ip 'fe80::/10'
    list icmp_type '130/0'
    list icmp_type '131/0'
    list icmp_type '132/0'
    list icmp_type '143/0'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-ICMPv6-Input'
    option src 'wan'
    option proto 'icmp'
    list icmp_type 'echo-request'
    list icmp_type 'echo-reply'
    list icmp_type 'destination-unreachable'
    list icmp_type 'packet-too-big'
    list icmp_type 'time-exceeded'
    list icmp_type 'bad-header'
    list icmp_type 'unknown-header-type'
    list icmp_type 'router-solicitation'
    list icmp_type 'neighbour-solicitation'
    list icmp_type 'router-advertisement'
    list icmp_type 'neighbour-advertisement'
    option limit '1000/sec'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-ICMPv6-Forward'
    option src 'wan'
    option dest '*'
    option proto 'icmp'
    list icmp_type 'echo-request'
    list icmp_type 'echo-reply'
    list icmp_type 'destination-unreachable'
    list icmp_type 'packet-too-big'
    list icmp_type 'time-exceeded'
    list icmp_type 'bad-header'
    list icmp_type 'unknown-header-type'
    option limit '1000/sec'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-IPSec-ESP'
    option src 'wan'
    option dest 'lan'
    option proto 'esp'
    option target 'ACCEPT'

config rule
    option name 'Allow-ISAKMP'
    option src 'wan'
    option dest 'lan'
    option dest_port '500'
    option proto 'udp'
    option target 'ACCEPT'

config include
    option path '/etc/firewall.user'

config include 'miniupnpd'
    option type 'script'
    option path '/usr/share/miniupnpd/firewall.include'
    option family 'any'
    option reload '1'
 


samba:

config samba
    option name 'LEDE'
    option workgroup 'WORKGROUP'
    option description 'LEDE'
    option friendly_name 'LEDE-245server'
    option interface 'br-lan'
    option homes '1'

config sambashare
    option browseable 'yes'
    option name 'Blue'
    option path '/mnt/sda1'
    option users 'comp'
    option read_only 'no'
    option guest_ok 'yes' 

Documentation : https://forum.openwrt.org/viewtopic.php?id=39077
.
I think no errors

For me ithe boxes are not more than 5 meters apart

For samba i use : option interface 'br-lan,eth0,wlan0'

I have always miniDLNA conflicts but i use for test at this time 6 relayd box's  in same time !!!

2 * KIMAX U25CWF
2 * KIMAX U25AWF-H1 ( box with lan + battery )
2 * NEXX WT3020F

(Last edited by F5BJR on 5 Jan 2018, 21:14)

where do  you know these 3 names from?
they are not mentioned directly in your config files
or how do I know these 3 for my case?

where do  you know these 3 names from?

Sorry , i have only copied the configuration for a box and run that is the essential !!!

I have a configuration running fine
I import for another box
I change the name , IP , and mac address 
uci commit xxxx
reboot

the other box run ...

-------------------------
vadim245 just another little info :

the option channel number is not important in relay mode
the channel is automatic and is given by the master ap

it is only important to know if the channel is not too disturbed and change it in the master ap for an available channel

for this to work well, the channel number in the Wireless config file must be the same as that of the AP master
otherwise there will be two channels used that in AP mode of the WT3020 and that of the master AP used in relay mode

(Last edited by F5BJR on 6 Jan 2018, 03:24)

F5BJR
do you have some fresh meat to share?
Any new version compiled :-)
Thank you

new version : git pull + feeds update

http://www.mediafire.com/file/1g8qzv2f5 … pgrade.bin

For the DLNA problem i have found the problem ::

I have before this line in the network file ( sure MAC adress conflict ) ??? 

config device 'lan_dev'
        option name 'eth0'
        option macaddr '20:0a:8e:21:ac:ac'

i have removed , reboot and no problem after

(Last edited by F5BJR on 31 Mar 2018, 10:07)

Hi Every new release from you looks cooler :-)

Hi f5. Can u compile with all sata hdd option enable in kmod for me? my device cant recognise sata hdd. Help

my device cant recognise sata hdd. Help ... WHY ?

the internal HDD is detected in my box's , no problem

(Last edited by F5BJR on 5 Mar 2018, 17:22)

ganzo8247, to make things clear:
- does HDD work over USB attached to a PC? what FS it is formatted to (Fat32/NTFS/.....)?
- can you launch OWrt (press the rear buton) and does wifi start?
- can you connect to the Box over wifi?
- can you connect to OWrt LUCI web interface  in a browser?
- can you mount HDD in LUCI web interface  ?
- can you start SMB and tune an HDD share?

My HDD does work when flashed to F5BJR's firmware!

(Last edited by vadim245 on 6 Mar 2018, 10:03)

- HDD works over Usb attachd to pc. I tried fs fat32, ext4, ntfs,exFat
- Owrt works great except sata hdd recognise
-i connect box over wifi
- luci webui works great
- my hdd doesnt show up luci's mount
- cant start smb, hdd share. I cant mount hdd

HDD sounds spining. df -h, ls /dev/, blkid, fdisk -l cant show my hdd.

I personally would prefer:

1. in terminal "rm /etc/config/fstab"   and then "block detect >> /etc/config/fstab"
2. in terminal: "firstboot"   and then  "reboot"
3. Reflash and reboot

Once there was 1 strange issue: HDD was not unplugged  from PC when pressing  a Wifi Start rear button and thus it could not be detected/ If this is your case - attach the box to any charger, not a PC USB

(Last edited by vadim245 on 6 Mar 2018, 11:20)

hi
I also had a box of Kimax U25CWF ... native firmware absolutely curve. came across this thread of discussion ...
now installed the latest firmware from this forum. 4.9.77
I'm not very versed in Linux, I can not recompile independently. when trying to update the packets it's always clear, because it's already 4.9.87.

at the moment I have the main problem in that I would like to use the button to switch from the client's wifi to the access point with LED indication.
I do not understand what's the matter. neither hotplug nor rk.button do not work when you press reset .. put everywhere a logger in scripts , but nothing is spelled on the log.
and when you press the Wifi button, you get the first click - stupor. second click - reboot the device ...

Help please, eh?
I do not know what to do ...

Are you sure it is possible to re-assign the button function this way? The only idea that I have is to make 2 wifi configurations and 2 backups: when necessary - just to activate the one you need. Of course a bit tricky because if current configuration is a LAN client, for instance  at 192.168.10.1 router and you are in some other distant place, you can not access web interface to restore to the proper configuration (to make the Box a 192.168.1.1 access point).

I was even talking on another bug some msgs above: on factory firmware the button disconnects the Box HDD from USB data mode and starts wifi access point. But in OWRT sometimes it starts wifi without disconnecting from PC and thus the HDD becomes not mountable for wifi sharing.

the idea should work, the demon is hanging. but i can not get what  want

more information:
ht_tps://wiki.openwrt.org/doc/howto/hardware.button

and this links to related topics
h_ttps://wiki.openwrt.org/doc/howto/wifitoggle
htt_ps://wiki.openwrt.org/doc/uci/wifitoggle
ht_tps://geektimes.ru/post/257620/

Why do I need it?
I want to be able to manually switch the type of use, in one case - the access point to configure, for example. through SSH or telnet.
in the second case - as a client of its network.

help me