OpenWrt Forum Archive

Topic: Bad communication between kernel and Luci

The content of this topic has been archived on 4 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
F5BJR
8 Dec 2017, 07:58

1 - i start default firmware ( LEDE )

2 - i change br-lan IP to 192.168.1.25

3 - i open web page in 192.168.1.25 -> ok

4 - i look in web page for lan and i have always the default IP 192.168.1.1   

5 - I look in minidlna page and IP is also default iP 192.168.1.1

6 - for lan i use luci for 192.168.1.25 , i save

6 - I look in minidlna page and IP is also default iP 192.168.1.1

Question : Why this ?

With my WNR3500 and Tomato firmware the IP configuratioon is automaticly good

(Last edited by F5BJR on 8 Dec 2017, 11:20)

Post #2
Antek
10 Dec 2017, 18:30

Post your question to the General Forum. You are more likely to get a response there. Also, go to your /etc/config/ folder and include the full content of your "dhcp", "firewall", "network" and "wireless" files to your post. Otherwise we cannot help you.

Post #3
nitroshift
11 Dec 2017, 05:20

Closed as duplicate.

nitroshift

The discussion might have continued from here.