Reboots loop TP-TL-WDR3600
Hello, everyone,
I'm new here and I don't speak English. I translated the text with deepl. com.
I have problems with my WDR3600, after using the router as a free-radio router (based on OpenWRT) for 1 year, I installed the OpenWRT version openwrt-15.05.1-ar71xx-generic-tl-wdr3600-v1-squashfs-factory. Except for the activation of the WLAN, there were no problems. After a router restart, the WLAN did not start automatically, even though it was configured this way.
Now the router crashed (after about 5 weeks) and hangs in a reboot loop. I'm still in FileSafe mode, but I can't copy the image to the router.
I tried wget and nc, but without success.
Can someone help me? Thank you very much!
Greetings Mike
Originaltext--------------
Hallo zusammen,
ich bin neu hier, und spreche leider kein Englisch. Ich habe den Text mit deepl.com übersetzt.
Ich habe Probleme mit meinem WDR3600. Nachdem ich 1 Jahr lang den Router als Freifunkrouter (basiert auf OpenWRT) verwendet habe, habe ich die OpenWRT-Version openwrt-15.05.1-ar71xx-generic-tl-wdr3600-v1-squashfs-factory installiert. Bis auf die Aktivierung des WLAN, gab es keine Probleme. Nach einen Routerneustart startete das WLAN nicht von selbst, obwohl es so konfiguriert war.
Nun ist der Router (nach ca. 5 Wochen) abgestürzt, und hängt in einer Reboot-Schleife. Ich komme noch in den FileSafe-Modus, aber mir gelingt es nicht das Image auf den Router zu kopieren.
Ich habe es mit wget und nc probiert, jedoch ohne Erfolg.
Kann mir jemand helfen? Vielen Dank!
Gruß Mike