OpenWrt Forum Archive

Topic: TP-Link W8970 v1 AP + Wifi Client + Switch

The content of this topic has been archived on 13 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
mico86
29 Dec 2017, 22:32

Hi guys,
I have the settings in the image:
1) My ISP Provider, Fastweb, with a router Pirelli DRG A226M, subnet 192.168.1.0/24 (DHCP)
2) Router Tp-Link W8970 OpenWRT, subnet 192.168.0.0/24 (DHCP con ethernet ETH1, 2 and 3). The ETH4 is the wan of Fastweb.
3) Tp-link TL-R470T+, multiwan, subnet 192.168.2.0/24.

In additional I have an usb wifi card that I have plugged inside the usb port of the w8970 and it works well, i have connected to an external access point as dhcp client.

I want to know how set the w8970 to use in this way:
- internal wifi and eth1 is Fastweb
- eth2 is the lan of external access point.
Is possibile?

P.s. please admin, can I insert an image of my schema?
Thanks!
Thanks!

(Last edited by mico86 on 29 Dec 2017, 22:34)

Post #2
xicoyihl
10 Jan 2018, 17:38

Your connection line is not ADSL or VDSL? Because the Pirelli device is a DSL device.
Just remove the Pirelli and use the TP-Link as main modem. It support VDSL/ADSL/VDSL Vectoring.

The discussion might have continued from here.