OpenWrt Forum Archive

Topic: bricked Asus RT-N56U after installing openwr

The content of this topic has been archived on 9 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hi there,

I tried to install openwrt on my Asus RT-N56U.

I followed the instructions from the wiki (asus/rt-n56u#recovery_installation) with the sysupgrade image (openwrt-15.05.1-ramips-rt3883-rt-n56u-squashfs-sysupgrade.bin), now I can't reach it via browser and only the power lamp is glowing, all other lamps are off.

Firmware restoration tool still uploads firmwares in recovery mode (tried it with the original Asus .trx) and says "recovery successful", but the router still plays dead with only the power lamp glowing.

What can I do now? I'm on Windows 10.

Update:
It is a N56U B1 and no N56U, which means it is incompatible with openwrt...
I flashed the B1 firmware with the firmware restoration tool, now at least it works again.

(Last edited by brokenasus on 4 Jan 2018, 14:30)

The discussion might have continued from here.