I wanted to connect a xbox or laptop directly to a AP. I want to set this AP up a 100' to 150' away from my main network. While testing it on my home the AP does connect to the network.but a device connected to it does not connect to the network. Any thoughts?
Topic: MR-24 connection to the Ethernet port
The content of this topic has been archived on 22 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
If you're doing WDS bridging, put the ethernet port in the same network bridge (by default lan) as the WDS client.
The discussion might have continued from here.
Page 1 of 1