Hello,
sysupgrade.tar generated but no factory.bin is generated when compiling from scratch.
I'm trying to build a factory Ubiquiti EdgeRouter X install image.
I've done this: "or Target System you should choose Ralink RT288x/RT3xxx. This in turn enables you to choose from various Mediatek subtargets, in the case of the Ubiquiti EdgeRouter X you choose MT7621 based boards. Having done that, there will be a Target Profile specifically for this router. Now this feels a lot more reassuring than my earlier option where I couldn't choose subtargets or a profile." as instructed by this blog: googleopenwrt-on-the-ubiquiti-edgerouter-x.html
I can generate the following files just fine but how to I get the factory bin? Is there a menuconfig option that I am missing?
chris@chris-desktop ~/openwrt/test/openwrt/bin/ramips $ ls -al
total 2776
drwxr-xr-x 3 chris chris 4096 Jan 31 23:48 .
drwxr-xr-x 3 chris chris 4096 Jan 31 23:43 ..
-rw-r--r-- 1 chris chris 89 Jan 31 23:48 md5sums
-rw-r--r-- 1 chris chris 2795520 Jan 31 23:48 openwrt-ramips-mt7621-ubnt-erx-squashfs-sysupgrade.tar
drwxr-xr-x 10 chris chris 4096 Jan 31 23:48 packages
-rw-r--r-- 1 chris chris 214 Jan 31 23:48 sha256sums
No <openwrt-ramips-mt7621-ubnt-erx-initramfs-kernel.bin > is to be found anywhere. I haven't enabled any options but to select the profile of my device.
Thanks!
Chris