Search does not work...

I can't get a wlan bridge working

I made A Wlan Client Interface (search)

and a Wlan Master (Create) in the Master Interface I made a bridge to Client Interface.

I don't get an IP from Client Network (with dhcp Server) when I connect to WLAN Master Interface with computer.

I then tried to setup a Bridge to master in Client also, but think have to reset the thing now.

Why there isn't a clear description how to setup a repeater / bridge.

There is a long an detailed guide about this subject at https://wiki.openwrt.org/doc/howto/clientmode

Is it possible to set that up with the Luci Gui?

I found that Pages allready, but it is quite complicated.

With the Original Firmware I could setup the Repeater easily because I bought as an Repeater.

I installed OpenWrt to have a linux router, but just need wlan repeater now.

Is it possible to setup as WLAN Repeater with the Luci Menu?

In your case, screenshots of the configuration you made, can be helpfull.

There is a section in the guide for "relayd" explaining how to do this using the GUI: https://wiki.openwrt.org/doc/recipes/re … ui_instead