I'm running a tap openvpn server on LEDE Reboot 17.01.4 on a GL-AR300M. Everything works fine, I can start the service under the system->startup tab and connect to it fine. I can also start the vpn via the luci openvpn interface. I can connect to it and it all runs fine. Configered via luci-app-openvpn.
If I enable the openvpn for autostart with /etc/init.d/openvpn enable, a link to the script is successfully created in /etc/rc.d/S99openvpn.
However if I reboot the device, the link is removed and autostart disabled. The service didn't start and I can't find anything in the system log file.
Could somebody point me into the right direction on finding what causes this? Could it have anything to do with the router connecting via the wifi as a client to another router?
Cheers
Below the openvpn script, except for start and stop its untouched.
#!/bin/sh /etc/rc.common
# Copyright (C) 2008-2013 OpenWrt.org
# Copyright (C) 2008 Jo-Philipp Wich
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
START=98
STOP=99
USE_PROCD=1
PROG=/usr/sbin/openvpn
LIST_SEP=""
UCI_STARTED=
UCI_DISABLED=
append_param() {
local s="$1"
local v="$2"
case "$v" in
*_*_*_*) v=${v%%_*}-${v#*_}; v=${v%%_*}-${v#*_}; v=${v%%_*}-${v#*_} ;;
*_*_*) v=${v%%_*}-${v#*_}; v=${v%%_*}-${v#*_} ;;
*_*) v=${v%%_*}-${v#*_} ;;
esac
echo -n "$v" >> "/var/etc/openvpn-$s.conf"
return 0
}
append_bools() {
local p; local v; local s="$1"; shift
for p in $*; do
config_get_bool v "$s" "$p"
[ "$v" = 1 ] && append_param "$s" "$p" && echo >> "/var/etc/openvpn-$s.conf"
done
}
append_params() {
local p; local v; local s="$1"; shift
for p in $*; do
config_get v "$s" "$p"
IFS="$LIST_SEP"
for v in $v; do
[ -n "$v" ] && [ "$p" != "push" ] && append_param "$s" "$p" && echo " $v" >> "/var/etc/openvpn-$s.conf"
[ -n "$v" ] && [ "$p" == "push" ] && append_param "$s" "$p" && echo " \"$v\"" >> "/var/etc/openvpn-$s.conf"
done
unset IFS
done
}
section_enabled() {
config_get_bool enable "$1" 'enable' 0
config_get_bool enabled "$1" 'enabled' 0
[ $enable -gt 0 ] || [ $enabled -gt 0 ]
}
openvpn_add_instance() {
local name="$1"
local dir="$2"
local conf="$3"
procd_open_instance
procd_set_param command "$PROG" \
--syslog "openvpn($name)" \
--status "/var/run/openvpn.$name.status" \
--cd "$dir" \
--config "$conf"
procd_set_param file "$dir/$conf"
procd_set_param respawn
procd_append_param respawn 3600
procd_append_param respawn 5
procd_append_param respawn -1
procd_close_instance
}
start_instance() {
local s="$1"
config_get config "$s" config
config="${config:+$(readlink -f "$config")}"
section_enabled "$s" || {
append UCI_DISABLED "$config" "$LIST_SEP"
return 1
}
[ ! -d "/var/run" ] && mkdir -p "/var/run"
if [ ! -z "$config" ]; then
append UCI_STARTED "$config" "$LIST_SEP"
openvpn_add_instance "$s" "${config%/*}" "$config"
return
fi
[ ! -d "/var/etc" ] && mkdir -p "/var/etc"
[ -f "/var/etc/openvpn-$s.conf" ] && rm "/var/etc/openvpn-$s.conf"
append_bools "$s" $OPENVPN_BOOLS
append_params "$s" $OPENVPN_PARAMS
openvpn_add_instance "$s" "/var/etc" "openvpn-$s.conf"
}
start_service() {
. /usr/share/openvpn/openvpn.options
config_load 'openvpn'
config_foreach start_instance 'openvpn'
local path name
for path in /etc/openvpn/*.conf; do
if [ -f "$path" ]; then
name="${path##*/}"; name="${name%.conf}"
# don't start configs again that are already started by uci
if echo "$UCI_STARTED" | grep -qxF "$path"; then
continue
# don't start configs which are set to disabled in uci
elif echo "$UCI_DISABLED" | grep -qxF "$path"; then
logger -t openvpn "$name.conf is disabled in /etc/config/openvpn"
continue
fi
openvpn_add_instance "$name" "${path%/*}" "$path"
fi
done
}
service_triggers() {
procd_add_reload_trigger openvpn
}(Last edited by spongioblast on 25 Feb 2018, 00:46)