TheDrake wrote:
Already sent e-mail with it.
not yet recieved!!!
may be send link to PM?
(Last edited by AndreyPopov on 14 May 2009, 10:39)
Topic: Asus WL600g
The content of this topic has been archived between 19 Sep 2015 and 3 May 2018. Unfortunately there are posts – most likely complete pages – missing.
Page 25 of 49
I use this version bcm96348GW_fs_kernel_3.02L.01.-090508_2325.zip and works fine without problems untill now,thanks drake
AndreyPopov wrote:
2. about SNMP
when on SNMP Web page Enable SNMP agent then snmpd daemon appear in processes and snmpd.conf in var, but after restart router only snmp client process appear in processes.this command disable snmp:
http://<router_address>/snmpconfig.cgi?snmpStatus=0this command:
http://<router_address>/snmpconfig.cgi?snmpStatus=1&snmpRoCommunity=public&snmpRwCommunity=private&snmpSysName=Default&snmpSysContact=unknown&snmpSysLocation=unknown&snmpTrapIp=0.0.0.0start snmpd daemon
any idea automaticaly start snmpd daemon?
My snmp starts every time it reboots and I have no snmpd exe, but snmp process inside cfm. My PRTG confirms it...
Have I lost something? Is it related to the usual default config? BTW: I had snmp configured first by telnet.
Bye,
Paolo.
AndreyPopov wrote:
bago wrote:[AFAIK Kernel modules depends on kernel version, but standard programs do not: they depends on platform and capabilities.
but ALL programs need uClibc libraries and other dependencies that compiled on specific kernel.
So you say if we get uClibc compiled for the wl600g every other ipk package from that repository will start working?
TheDrake wrote:
My snmp starts every time it reboots and I have no snmpd exe, but snmp process inside cfm. My PRTG confirms it...
Have I lost something? Is it related to the usual default config? BTW: I had snmp configured first by telnet.
snmp after restart is CLIENT!!!!!!!!
after restart in /var snmpd.conf is absent!!!
you need snmp client or snmp server (daemon)????
to get information from router you need snmp server started - snmpd!
P.S. please post link to mc.
(Last edited by AndreyPopov on 15 May 2009, 10:15)
AndreyPopov wrote:
TheDrake wrote:My snmp starts every time it reboots and I have no snmpd exe, but snmp process inside cfm. My PRTG confirms it...
Have I lost something? Is it related to the usual default config? BTW: I had snmp configured first by telnet.
snmp after restart is CLIENT!!!!!!!!
after restart in /var snmpd.conf is absent!!!
you need snmp client or snmp server (daemon)????
to get information from router you need snmp server started - snmpd!
P.S. please post link to mc.
I thrust you about snmp name (I got the same in ps list) but snmp server works indeed... 
I've tryied snmpwalk from my PC that get snmp tree and my PRTG server that continue to get data and graphing bandwidth (I'm referring to my last build but I've not changed a lot here).
About mc, you won... ;-)
http://www.drakeworld.net/blogs/media/b … e-beta.zip
Bye,
Paolo.
TheDrake wrote:
About mc, you won... ;-)
# /var/harddisk/asus/mc/bin/mc
/var/harddisk/asus/mc/bin/mc: can't load library 'libintl.so.8'
this error sloved
Cannot create temporary directory /tmp/mc-admin: No such file or directory (2)
Temporary files will not be created
Press any key to continue...by adding
export TMPDIR=/var/harddisk/asus/tmp
+ added darkstat to hd apps
+ added darkstat to services page
+ added "Show config" to each services
(Last edited by AndreyPopov on 18 May 2009, 20:28)
new version with Midnight Commander:
- download file http://www.csa.dp.ua/downloads/asus_rou … 516.tar.gz
- enable ftp on router
- by ftp copy file to router
- connect to router by telnet
- after router menu type sh command
- then:
cd /var/harddisk
tar xzvf wl600_hd_0516.tar.gzwait until unpack. unpack may be long time that's why periodicaly (one time in five minutes) press any key (arrow for example) or set in terminal software keepalive settings.
Midnight Commander can start in telnet by /var/harddisk/asus/mc.sh
if you file system ext2 after unpack you have ALL worked apps.
if you file system FAT/FAT32 than in telnet:
mv /var/harddisk/asus/lib/libcurl.so.4.1.1 /var/harddisk/asus/lib/libcurl.so.4
mv /var/harddisk/asus/lib/libsqlite3.so.0.8.6 /var/harddisk/asus/lib/libsqlite3.so.0
mv /var/harddisk/asus/lib/libcharset.so.1.0.0 /var/harddisk/asus/lib/libcharset.so.1
mv /var/harddisk/asus/lib/libgdbm.so.3.0.0 /var/harddisk/asus/lib/libgdbm.so.3
mv /var/harddisk/asus/lib/libgio-2.0.so.0.2000.0 /var/harddisk/asus/lib/libgio-2.0.so.0
mv /var/harddisk/asus/lib/libglib-2.0.so.0.2000.0 /var/harddisk/asus/lib/libglib-2.0.so.0
mv /var/harddisk/asus/lib/libgmodule-2.0.so.0.2000.0 /var/harddisk/asus/lib/libgmodule-2.0.so.0
mv /var/harddisk/asus/lib/libgobject-2.0.so.0.2000.0 /var/harddisk/asus/lib/libgobject-2.0.so.0
mv /var/harddisk/asus/lib/libgthread-2.0.so.0.2000.0 /var/harddisk/asus/lib/libgthread-2.0.so.0
mv /var/harddisk/asus/lib/libiconv.so.2.4.0 /var/harddisk/asus/lib/libiconv.so.2
mv /var/harddisk/asus/lib/libintl.so.8.0.1 /var/harddisk/asus/lib/libintl.so.8(Last edited by AndreyPopov on 16 May 2009, 15:27)
AndreyPopov wrote:
new version with Midnight Commander:
Great work. Forgive me: I had no time to help you sending the libs too, sorry. 
I'm actually testing my last build that seems rock solid, but WITHOUT NARS... I have PPP instability with NARS patch.
Anyone knows anything about NARSv2? Please anyone could tell me WHAT problem EXACTLY does NARS try to solve?
I'm working also on recompile companion apps with shared libs. I also patched ldd and ldconfig for full support of Asus wl-600d file system dir structure.
If I'll survive to my washing-machine meltdown you'll get something in the WeekEnd.
Once again please be patient and thanks to all for comments and support.
Bye,
Paolo.
Hi all.
Please compile Darkstat for WL-600.
Captures network traffic, calculates statistics about usage, and serves reports over HTTP.
http://dmr.ath.cx/net/darkstat/
I think, that the is that a good shell.
Thanks
TheDrake wrote:
Anyone knows anything about NARSv2? Please anyone could tell me WHAT problem EXACTLY does NARS try to solve?
I find
http://submax.altervista.org/index.php? … 9108a.html
http://submax.altervista.org/usr9108a/U … src.tar.gz
http://www.forumclix.net/viewtopic.php?p=57345 NARS forum
(Last edited by AndreyPopov on 16 May 2009, 18:10)
http://91.121.106.170/asus/wl600_hd_0516.tar.gz fast link
MC not work
(Last edited by fantom on 17 May 2009, 10:20)
fantom wrote:
MC not work
if you use FAT/FAT32 file system you need RENAME libs!
(Last edited by AndreyPopov on 17 May 2009, 12:07)
TheDrake wrote:
TheDrake wrote:TheDrake wrote:New version 1035A(PM) - build 090427_0003 - Beta
Download here: bcm96348GW_fs_kernel_3.02L.01.-090427_0003.zip
New version 1035A(PM) - build 090507_0005 - Beta
Download here: bcm96348GW_fs_kernel_3.02L.01.-090507_0005.zip
New version 1035A(PM) - build 090508_2325 - Beta
Download here: bcm96348GW_fs_kernel_3.02L.01.-090508_2325.zip
Remember that this is a Beta version. Some basic Linux knowledge is needed for installing original zip package + companion zips. Please download AndreyPopov full zipfile for a simplified install.
New version 1035A(PM) - build 090517_1454 - Beta
Download here: bcm96348GW_fs_kernel_3.02L.01.-090517_1454.zip
Features:
- WARNING, NARS REMOVED. It gives to me instabilty.
+ tune-ups and bugfixes
+ mke2fs, tune2fs, e2fsck (snakus version) included!
+ more busybox cmds
+ better dynamics libs support (please update your HD programs ldutils-090517_1454.tar.gz - sadly ldconfig does not work on FAT32)
+ Original firmware chinese cp now included in firmware, you could mount again FS with this cp (manually, see royon.james script)
+ stopped echo "1" > /proc/sys/net/ipv4/conf/$WANIF/rp_filter (AndreyPopov)
+ probably more (forgotten)...
Built-in commands:
-------------------
. : break cd continue eval exec exit export help login newgrp
read readonly set shift times trap umask wait [ ar arping awk
basename bunzip2 busybox bzcat cat chgrp chmod chown chroot chvt
clear cmp cp crond date dd deallocvt df dirname dmesg dos2unix
dpkg dpkg-deb du echo egrep env expr false fdisk fgrep find free
ftpget ftpput getopt grep gunzip gzip halt hdparm head hexdump
hostid hostname ifconfig init insmod install ipaddr iproute kill
killall klogd linuxrc ln logger logread ls lsmod md5sum mesg
mkdir mknod mkswap mktemp more mount msh mv netstat nslookup
patch pidof ping pipe_progress poweroff printf ps pwd readlink
realpath reboot renice reset rm rmdir rmmod route rpm run-parts
sed sendarp sh sleep sort strings swapoff swapon sync sysctl
sysinfo syslogd tail tar tee telnet test tftp tftpd time top
touch tr traceroute true tty umount uname uncompress uniq unix2dos
unzip uptime usleep uudecode uuencode vconfig vi watch wget which
xargs yes zcat
Companion zips, add apps on HD if needed:
transmission 1.61 (share libs)
startup-shutdown.tar.gz (please check your scripts) - Please modify line "mount -o remount,async /dev/discs/disc0/part2 /var/harddisk" in startup script with your partition number (eg: part1).
shared libs-update (please run "ldconfig /var/harddisk/asus/lib" after install)
090508_2325
* Several bugfix (Thanks AndreyPopov)
+ restored brcm_usb (Thanks AndreyPopov)
+ EXT3 now works (no more module)
- NTFS removed. Who is using a read-only fs?
+ IP parameter tweak for accept_source_route, accept_redirects (Thanks AndreyPopov)
+ fixed shudtown order in inittab
+ new shutdown script /var/harddisk/asus/shutdown for shutting down services
+ more companion zips (e2fsprogs, bins for dynamic libraries management)
090507_0005
+ dynamic libs support (HD lib path: /var/harddisk/asus/lib)
+ dnsprobe removed/hacked/substituted for dnsmasq (! great improvement in speed/stability !)
+ more stupid-ftp patches + speedup (untested, thanks Sergey Lvov)
+ added support for path /var/harddisk/bin and /var/harddisk/sbin (domodossola compatibility)
+ removed oriental codepages (Thanks Andrey Gangan)
+ removed some unneeded drivers (thanks Andrey Gangan)
+ /var tempfs RAM usage limited to 512k, more free RAM available
+ removed multimedia drivers (webcam could not work)
+ restored iproute2 functionality from 1.0.3.5 (bug in previous builds)
+ please see companion zips for dynamic libs and dynamic versions of apps on HD
Companion zips, please update apps on HD:
http://www.drakeworld.net/blogs/media/b … lib.tar.gz (dynamic libs. warning, contains file links)
http://www.drakeworld.net/blogs/media/b … ission.zip (transmission 1.52 dynamic libs version, needs dynamic libs installed)
http://www.drakeworld.net/blogs/media/b … ynamic.zip (thttpd 2.25b dynamic libs version, needs dynamic libs installed)
note: transmission need to be started manually with command "/var/harddisk/asus/etc/init.d/transmission start" (you could add it to startup file) because web interface doesn't work.
090427_0003
+ more stupid-ftp patches for resuming large files (thanks Sergey!)
+ /var tempfs RAM usage limited to 640k
+ cfm patched for telnet always enabled on LAN (thanks AndreyPopov and Snakus!)
+ added mediatomb in usbapp/services menu, please download mediatomb-service.zip
090425_1654
+ stupid-ftp large files support
+ SNMP config page enabled
+ NARS patch (untested)
+ Cyrillic NLS (cp866, cp1251) added
090411_0113
based on 1.0.3.5A
Annex A
Kernel with EXT2, EXT3, NTFS (RO) support (m)
Kernel with swap support
Kernel support for SMB, NFS, CIFS (m)
Full uClibc libraries
Large file support
Long names support
Delayed startup for /var/harddisk/asus/startup
path for /var/harddisk/asus/bin embedded
adslcnfg.html (DSL_MENU) enabled
Webcam page enabled
hosts file with localhost defined
hostname with wl600g default name
As usual: No warranty, prepare to unbrick in case of failure (see http://domodossola.altervista.org/wl-600g/debrick.htm).
Support page: http://www.drakeworld.net/blogs/drakebl … mware_hack
Feedbacks welcome.
Bye,
Paolo.
(Last edited by TheDrake on 17 May 2009, 22:57)
i have fat 32 and rename libs
mc start error
mc screen
mc F10 button (exit) not work any key (F1....F5,F6....)
What does the SNMP do ?
Is there a chance to include any kind of http downloader with GUI (with rapidshare and megaupload support) ?
For example ADOS: http://download.dini.su/ados/stable . Here You can find tutorial = http://wl500g.info/showpost.php?p=85256&postcount=2.
Thanks,
Yours Uparciuch
ldconfig on fat32
# ldconfig /var/harddisk/asus/lib/
ldconfig: can't link /var/harddisk/asus/lib//libintl.so.8 to libintl.so.8.0.2: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib//libgthread-2.0.so.0 to libgthread-2.0.so.0.2000.1: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib//libgobject-2.0.so.0 to libgobject-2.0.so.0.2000.1: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib//libgmodule-2.0.so.0 to libgmodule-2.0.so.0.2000.1: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib//libglib-2.0.so.0 to libglib-2.0.so.0.2000.1: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib//libgio-2.0.so.0 to libgio-2.0.so.0.2000.1: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib//libgettextpo.so.0 to libgettextpo.so.0.4.0: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib//libasprintf.so.0 to libasprintf.so.0.0.0: Operation not permitted
ldconfig: /var/harddisk/asus/lib//libpng12.so.0 is not a symlink
ldconfig: /var/harddisk/asus/lib//libpng.so.3 is not a symlink
ldconfig: can't link /var/harddisk/asus/lib//libpanel.so.5 to libpanel.so.5.7: Operation not permitted
ldconfig: /var/harddisk/asus/lib//libexpat.so.1 is not a symlink
ldconfig: /var/harddisk/asus/lib//libstdc++.so.6 is not a symlink
ldconfig: can't link /var/harddisk/asus/lib//libz.so.1 to libz.so.1.2.3: Operation not permitted
ldconfig: /var/harddisk/asus/lib//libncurses.so.5 is not a symlink
ldconfig: /var/harddisk/asus/lib//libmenu.so.5 is not a symlink
ldconfig: /var/harddisk/asus/lib//libform.so.5 is not a symlink
ldconfig: /var/harddisk/asus/lib//libreadline.so.5 is not a symlink
ldconfig: /var/harddisk/asus/lib//libhistory.so.5 is not a symlink
ldconfig: /var/harddisk/asus/lib//libwx_base_xml-2.8.so.0 is not a symlink
ldconfig: /var/harddisk/asus/lib//libwx_base_net-2.8.so.0 is not a symlink
ldconfig: /var/harddisk/asus/lib//libwx_base-2.8.so.0 is not a symlink
ldconfig: can't link /var/harddisk/asus/lib//libcharset.so.1 to libcharset.so.1.0.0: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib//libcurl.so.4 to libcurl.so.4.1.1: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib//libgdbm.so.3 to libgdbm.so.3.0.0: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib//libiconv.so.2 to libiconv.so.2.4.0: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib//libsqlite3.so.0 to libsqlite3.so.0.8.6: Operation not permitted
ldconfig: skipping lib: No such file or directory
ldconfig: skipping usr/lib: No such file or directory
ldconfig: can't link /var/harddisk/asus/lib/libintl.so.8 to libintl.so.8.0.2: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib/libgthread-2.0.so.0 to libgthread-2.0.so.0.2000.1: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib/libgobject-2.0.so.0 to libgobject-2.0.so.0.2000.1: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib/libgmodule-2.0.so.0 to libgmodule-2.0.so.0.2000.1: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib/libglib-2.0.so.0 to libglib-2.0.so.0.2000.1: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib/libgio-2.0.so.0 to libgio-2.0.so.0.2000.1: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib/libgettextpo.so.0 to libgettextpo.so.0.4.0: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib/libasprintf.so.0 to libasprintf.so.0.0.0: Operation not permitted
ldconfig: /var/harddisk/asus/lib/libpng12.so.0 is not a symlink
ldconfig: /var/harddisk/asus/lib/libpng.so.3 is not a symlink
ldconfig: can't link /var/harddisk/asus/lib/libpanel.so.5 to libpanel.so.5.7: Operation not permitted
ldconfig: /var/harddisk/asus/lib/libexpat.so.1 is not a symlink
ldconfig: /var/harddisk/asus/lib/libstdc++.so.6 is not a symlink
ldconfig: can't link /var/harddisk/asus/lib/libz.so.1 to libz.so.1.2.3: Operation not permitted
ldconfig: /var/harddisk/asus/lib/libncurses.so.5 is not a symlink
ldconfig: /var/harddisk/asus/lib/libmenu.so.5 is not a symlink
ldconfig: /var/harddisk/asus/lib/libform.so.5 is not a symlink
ldconfig: /var/harddisk/asus/lib/libreadline.so.5 is not a symlink
ldconfig: /var/harddisk/asus/lib/libhistory.so.5 is not a symlink
ldconfig: /var/harddisk/asus/lib/libwx_base_xml-2.8.so.0 is not a symlink
ldconfig: /var/harddisk/asus/lib/libwx_base_net-2.8.so.0 is not a symlink
ldconfig: /var/harddisk/asus/lib/libwx_base-2.8.so.0 is not a symlink
ldconfig: can't link /var/harddisk/asus/lib/libcharset.so.1 to libcharset.so.1.0.0: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib/libcurl.so.4 to libcurl.so.4.1.1: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib/libgdbm.so.3 to libgdbm.so.3.0.0: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib/libiconv.so.2 to libiconv.so.2.4.0: Operation not permitted
ldconfig: can't link /var/harddisk/asus/lib/libsqlite3.so.0 to libsqlite3.so.0.8.6: Operation not permitted
ldconfig: skipping /var/harddisk/lib: No such file or directorybago wrote:
ldconfig on fat32
# ldconfig /var/harddisk/asus/lib/ ldconfig: can't link /var/harddisk/asus/lib//libintl.so.8 to libintl.so.8.0.2: Operation not permitted .....
I'm sorry that it doesn't work... You can still rename/copy files but I suggest to ugrade to ext2.
BTW, if you need, you can read/write linux partitions on Windows with this extension: http://www.fs-driver.org/
Bye,
Paolo.
TheDrake wrote:
- WARNING, NARS REMOVED. It gives to me instabilty.
can you make variant with NARS patch for me for test - NARS reconnect is VERY NEEDED for CIS countries!!!
fantom wrote:
i have fat 32 and rename libs
mc start error
mc screen
mc F10 button (exit) not work any key (F1....F5,F6....)
about start error I wirte before my post!
and I WRITE:
Midnight Commander can start in telnet by /var/harddisk/asus/mc.sh(Last edited by AndreyPopov on 17 May 2009, 20:13)
Have big problem with web camera.
My Logitech QuickCam Messenger and Creative WebCam Live Motion not working.
Any idea?
Main Menu
1. ADSL Link State
2. LAN
3. WAN
4. DNS Server
5. Route Setup
6. NAT
7. Firewall
8. Quality Of Service
9. Management
10. Passwords
11. Reset to Default
12. Save and Reboot
13. Exit
-> sh
BusyBox v1.00 (2009.05.17-11:11+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
# dmesg
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 76k freed
Algorithmics/MIPS FPU Emulator v1.5
atmapi: module license 'Proprietary' taints kernel.
blaadd: blaa_detect entry
adsl: adsl_init entry
Broadcom BCMPROCFS v1.0 initialized
Broadcom BCM6348B0 Ethernet Network Device v0.3 Jan 19 2009 15:16:48
Config Ethernet Switch Through MDIO Sseudo PHY Interface
eth0: MAC Address: 02:10:18:01:00:01
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
wl: srom not detected, using main memory mapped srom info (wombo board)
wl0: wlc_attach: using main board MAC address base in NVRAM (wombo board)
wl0 MAC Address: 02:10:18:01:00:01
dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
wl0: Broadcom BCM4318 802.11 Wireless Controller 3.91.41.0
BcmAdsl_Initialize=0xC0054208, g_pFnNotifyCallback=0xC00673A4
AdslCoreHwReset: AdslOemDataAddr = 0xA0FF8054
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (125 buckets, 0 max) - 384 bytes per conntrack
ip_nat_ftp: Unknown symbol needs_ip_conntrack_ftp
ip_conntrack_rtsp: falsely claims to have parameter setup_timeout
ip_conntrack_rtsp v0.01 loading
ip_nat_pptp: Unknown symbol ip_ct_gre_keymap_change
ADSL G.994 training
ip_nat_rtsp v0.01 loading
device eth0 entered promiscuous mode
br0: port 1(eth0) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
device wl0 entered promiscuous mode
br0: port 2(wl0) entering learning state
br0: topology change detected, propagating
br0: port 2(wl0) entering forwarding state
device eth0 left promiscuous mode
br0: port 1(eth0) entering disabled state
ADSL G.992 started
device wl0 left promiscuous mode
br0: port 2(wl0) entering disabled state
device wl0 entered promiscuous mode
br0: port 1(wl0) entering learning state
br0: topology change detected, propagating
br0: port 1(wl0) entering forwarding state
device eth0.2 entered promiscuous mode
device eth0.3 entered promiscuous mode
device eth0.4 entered promiscuous mode
device eth0.5 entered promiscuous mode
eth0.2: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
br0: port 2(eth0.2) entering learning state
br0: topology change detected, propagating
br0: port 2(eth0.2) entering forwarding state
eth0.3: dev_set_promiscuity(master, 1)
br0: port 3(eth0.3) entering learning state
br0: topology change detected, propagating
br0: port 3(eth0.3) entering forwarding state
eth0.4: dev_set_promiscuity(master, 1)
br0: port 4(eth0.4) entering learning state
br0: topology change detected, propagating
br0: port 4(eth0.4) entering forwarding state
eth0.5: dev_set_promiscuity(master, 1)
br0: port 5(eth0.5) entering learning state
br0: topology change detected, propagating
br0: port 5(eth0.5) entering forwarding state
ADSL G.992 channel analysis
uhci_hcd: falsely claims to have parameter debug
USB Universal Host Controller Interface driver v2.2
PCI: Enabling device 0000:00:07.0 (0000 -> 0001)
uhci_hcd 0000:00:07.0: UHCI Host Controller
uhci_hcd 0000:00:07.0: irq 32, io base 0c000000
uhci_hcd 0000:00:07.0: new USB bus registered, assigned bus number 1
ADSL link up, fast, us=320, ds=1312
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:07.1 (0000 -> 0001)
uhci_hcd 0000:00:07.1: UHCI Host Controller
uhci_hcd 0000:00:07.1: irq 32, io base 0c000020
uhci_hcd 0000:00:07.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:07.2 (0000 -> 0002)
ehci_hcd 0000:00:07.2: EHCI Host Controller
capbase:::1000010
capbase:::1000010
ehci_hcd 0000:00:07.2: irq 32, pci mem a8010800
ehci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:07.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usblp: falsely claims to have parameter proto_bias
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
br0: port 1(wl0) entering disabled state
usb 1-1: new full speed USB device using address 2
usb 1-2: new full speed USB device using address 3
hub 1-2:1.0: USB hub found
br0: port 1(wl0) entering learning state
br0: topology change detected, propagating
br0: port 1(wl0) entering forwarding state
hub 1-2:1.0: 4 ports detected
br0: port 1(wl0) entering disabled state
usb 1-2.1: new full speed USB device using address 4
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 pr
oto 2 vid 0xF003 pid 0x0409
drivers/usb/class/usblp.c: usblp0 Device ID string [174]='MFG:HEWLETT-PACKARD;MD
L:DESKJET 845C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet
845C;SERN:TH17V13406SX;VSTATUS:$HB0$AU0,ff,DN,IDLE,CUT;VP:0800,FL,B0;'
usb 1-2.4: new full speed USB device using address 5
usb 1-2.4: not running at top speed; connect to a high speed hub
br0: port 1(wl0) entering learning state
br0: topology change detected, propagating
br0: port 1(wl0) entering forwarding state
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
br0: port 1(wl0) entering disabled state
br0: port 1(wl0) entering learning state
br0: topology change detected, propagating
br0: port 1(wl0) entering forwarding state
br0: port 1(wl0) entering disabled state
Vendor: ChipBank Model: SD/MM Reader Rev: 4080
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 1003520 512-byte hdwr sectors (514 MB)
sda: Write Protect is off
sda: Mode Sense: 0b 00 00 08
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: unknown partition table
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
USB Mass Storage device found at 5
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/class/usblp.c: usblp0 Device ID string [174/max 1552]='MFG:HEWLETT-P
ACKARD;MDL:DESKJET 845C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packar
d DeskJet 845C;SERN:TH17V13406SX;VSTATUS:$HB0$AU0,ff,DN,IDLE,CUT;VP:0800,FL,B0;'
drivers/usb/class/usblp.c: Parsing USBLPID...
drivers/usb/class/usblp.c: usblp0 Device ID string [174/max 1552]='MFG:HEWLETT-P
ACKARD;MDL:DESKJET 845C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packar
d DeskJet 845C;SERN:TH17V13406SX;VSTATUS:$HB0$AU0,ff,DN,IDLE,CUT;VP:0800,FL,B0;'
drivers/usb/class/usblp.c: Parsing USBLPID...
br0: port 2(eth0.2) entering disabled state
br0: port 3(eth0.3) entering disabled state
br0: port 4(eth0.4) entering disabled state
br0: port 5(eth0.5) entering disabled state
br0: port 1(wl0) entering learning state
br0: topology change detected, propagating
br0: port 1(wl0) entering forwarding state
VFS: Can't find ext2 filesystem on dev sda.
HTB init, kernel part version 3.17
Adding 21496k swap on /var/harddisk/myswap.swp. Priority:-1 extents:2
drivers/usb/class/usblp.c: usblp0 Device ID string [174/max 1552]='MFG:HEWLETT-P
ACKARD;MDL:DESKJET 845C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packar
d DeskJet 845C;SERN:TH17V13406SX;VSTATUS:$HB0$AU0,ff,DN,IDLE,CUT;VP:0800,FL,B0;'
drivers/usb/class/usblp.c: Parsing USBLPID...
drivers/usb/class/usblp.c: usblp0 Device ID string [174/max 1552]='MFG:HEWLETT-P
ACKARD;MDL:DESKJET 845C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packar
d DeskJet 845C;SERN:TH17V13406SX;VSTATUS:$HB0$AU0,ff,DN,IDLE,CUT;VP:0800,FL,B0;'
drivers/usb/class/usblp.c: Parsing USBLPID...
#
# cd /var/harddisk/ && ls
asus ftp_pub ftp_pvt gspca.ko myswap.swp spca5xx.ko
# insmod gspca.ko
Using gspca.ko
insmod: cannot insert `gspca.ko': Success (2): Success
# dmesg
: 76k freed
Algorithmics/MIPS FPU Emulator v1.5
atmapi: module license 'Proprietary' taints kernel.
blaadd: blaa_detect entry
adsl: adsl_init entry
Broadcom BCMPROCFS v1.0 initialized
Broadcom BCM6348B0 Ethernet Network Device v0.3 Jan 19 2009 15:16:48
Config Ethernet Switch Through MDIO Sseudo PHY Interface
eth0: MAC Address: 02:10:18:01:00:01
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
wl: srom not detected, using main memory mapped srom info (wombo board)
wl0: wlc_attach: using main board MAC address base in NVRAM (wombo board)
wl0 MAC Address: 02:10:18:01:00:01
dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
wl0: Broadcom BCM4318 802.11 Wireless Controller 3.91.41.0
BcmAdsl_Initialize=0xC0054208, g_pFnNotifyCallback=0xC00673A4
AdslCoreHwReset: AdslOemDataAddr = 0xA0FF8054
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (125 buckets, 0 max) - 384 bytes per conntrack
ip_nat_ftp: Unknown symbol needs_ip_conntrack_ftp
ip_conntrack_rtsp: falsely claims to have parameter setup_timeout
ip_conntrack_rtsp v0.01 loading
ip_nat_pptp: Unknown symbol ip_ct_gre_keymap_change
ADSL G.994 training
ip_nat_rtsp v0.01 loading
device eth0 entered promiscuous mode
br0: port 1(eth0) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
device wl0 entered promiscuous mode
br0: port 2(wl0) entering learning state
br0: topology change detected, propagating
br0: port 2(wl0) entering forwarding state
device eth0 left promiscuous mode
br0: port 1(eth0) entering disabled state
ADSL G.992 started
device wl0 left promiscuous mode
br0: port 2(wl0) entering disabled state
device wl0 entered promiscuous mode
br0: port 1(wl0) entering learning state
br0: topology change detected, propagating
br0: port 1(wl0) entering forwarding state
device eth0.2 entered promiscuous mode
device eth0.3 entered promiscuous mode
device eth0.4 entered promiscuous mode
device eth0.5 entered promiscuous mode
eth0.2: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
br0: port 2(eth0.2) entering learning state
br0: topology change detected, propagating
br0: port 2(eth0.2) entering forwarding state
eth0.3: dev_set_promiscuity(master, 1)
br0: port 3(eth0.3) entering learning state
br0: topology change detected, propagating
br0: port 3(eth0.3) entering forwarding state
eth0.4: dev_set_promiscuity(master, 1)
br0: port 4(eth0.4) entering learning state
br0: topology change detected, propagating
br0: port 4(eth0.4) entering forwarding state
eth0.5: dev_set_promiscuity(master, 1)
br0: port 5(eth0.5) entering learning state
br0: topology change detected, propagating
br0: port 5(eth0.5) entering forwarding state
ADSL G.992 channel analysis
uhci_hcd: falsely claims to have parameter debug
USB Universal Host Controller Interface driver v2.2
PCI: Enabling device 0000:00:07.0 (0000 -> 0001)
uhci_hcd 0000:00:07.0: UHCI Host Controller
uhci_hcd 0000:00:07.0: irq 32, io base 0c000000
uhci_hcd 0000:00:07.0: new USB bus registered, assigned bus number 1
ADSL link up, fast, us=320, ds=1312
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:07.1 (0000 -> 0001)
uhci_hcd 0000:00:07.1: UHCI Host Controller
uhci_hcd 0000:00:07.1: irq 32, io base 0c000020
uhci_hcd 0000:00:07.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:07.2 (0000 -> 0002)
ehci_hcd 0000:00:07.2: EHCI Host Controller
capbase:::1000010
capbase:::1000010
ehci_hcd 0000:00:07.2: irq 32, pci mem a8010800
ehci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:07.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usblp: falsely claims to have parameter proto_bias
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
br0: port 1(wl0) entering disabled state
usb 1-1: new full speed USB device using address 2
usb 1-2: new full speed USB device using address 3
hub 1-2:1.0: USB hub found
br0: port 1(wl0) entering learning state
br0: topology change detected, propagating
br0: port 1(wl0) entering forwarding state
hub 1-2:1.0: 4 ports detected
br0: port 1(wl0) entering disabled state
usb 1-2.1: new full speed USB device using address 4
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 pr
oto 2 vid 0xF003 pid 0x0409
drivers/usb/class/usblp.c: usblp0 Device ID string [174]='MFG:HEWLETT-PACKARD;MD
L:DESKJET 845C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet
845C;SERN:TH17V13406SX;VSTATUS:$HB0$AU0,ff,DN,IDLE,CUT;VP:0800,FL,B0;'
usb 1-2.4: new full speed USB device using address 5
usb 1-2.4: not running at top speed; connect to a high speed hub
br0: port 1(wl0) entering learning state
br0: topology change detected, propagating
br0: port 1(wl0) entering forwarding state
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
br0: port 1(wl0) entering disabled state
br0: port 1(wl0) entering learning state
br0: topology change detected, propagating
br0: port 1(wl0) entering forwarding state
br0: port 1(wl0) entering disabled state
Vendor: ChipBank Model: SD/MM Reader Rev: 4080
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 1003520 512-byte hdwr sectors (514 MB)
sda: Write Protect is off
sda: Mode Sense: 0b 00 00 08
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: unknown partition table
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
USB Mass Storage device found at 5
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/class/usblp.c: usblp0 Device ID string [174/max 1552]='MFG:HEWLETT-P
ACKARD;MDL:DESKJET 845C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packar
d DeskJet 845C;SERN:TH17V13406SX;VSTATUS:$HB0$AU0,ff,DN,IDLE,CUT;VP:0800,FL,B0;'
drivers/usb/class/usblp.c: Parsing USBLPID...
drivers/usb/class/usblp.c: usblp0 Device ID string [174/max 1552]='MFG:HEWLETT-P
ACKARD;MDL:DESKJET 845C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packar
d DeskJet 845C;SERN:TH17V13406SX;VSTATUS:$HB0$AU0,ff,DN,IDLE,CUT;VP:0800,FL,B0;'
drivers/usb/class/usblp.c: Parsing USBLPID...
br0: port 2(eth0.2) entering disabled state
br0: port 3(eth0.3) entering disabled state
br0: port 4(eth0.4) entering disabled state
br0: port 5(eth0.5) entering disabled state
br0: port 1(wl0) entering learning state
br0: topology change detected, propagating
br0: port 1(wl0) entering forwarding state
VFS: Can't find ext2 filesystem on dev sda.
HTB init, kernel part version 3.17
Adding 21496k swap on /var/harddisk/myswap.swp. Priority:-1 extents:2
drivers/usb/class/usblp.c: usblp0 Device ID string [174/max 1552]='MFG:HEWLETT-P
ACKARD;MDL:DESKJET 845C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packar
d DeskJet 845C;SERN:TH17V13406SX;VSTATUS:$HB0$AU0,ff,DN,IDLE,CUT;VP:0800,FL,B0;'
drivers/usb/class/usblp.c: Parsing USBLPID...
drivers/usb/class/usblp.c: usblp0 Device ID string [174/max 1552]='MFG:HEWLETT-P
ACKARD;MDL:DESKJET 845C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packar
d DeskJet 845C;SERN:TH17V13406SX;VSTATUS:$HB0$AU0,ff,DN,IDLE,CUT;VP:0800,FL,B0;'
drivers/usb/class/usblp.c: Parsing USBLPID...
gspca: Unknown symbol video_devdata
gspca: Unknown symbol video_unregister_device
gspca: Unknown symbol video_device_alloc
gspca: Unknown symbol video_register_device
gspca: Unknown symbol video_usercopy
gspca: Unknown symbol video_device_release
#Ficu wrote:
Have big problem with web camera.
My Logitech QuickCam Messenger and Creative WebCam Live Motion not working.
Any idea?
Have they ever worked with previous version of firmware (original or custom)?
Bye,
Paolo.
I test with original 1035, 1028, 1032 and yours custom firmware and not working.
On original firmware gspca installed correctly but camera not work.
I bought a special Logitech QuickCam Messenger to make mini webcam server from my router.
(Last edited by Ficu on 17 May 2009, 22:31)
Ficu wrote:
I test with original 1035, 1028, 1032 and yours custom firmware and not working.
On original firmware gspca installed correctly but camera not work.
I bought a special Logitech QuickCam Messenger to make mini webcam server from my router.
I see no evidence that webcam could work without more software missing from original firmware.
Please if anyone knows how to make it work, tell us.
Bye,
Paolo.
AndreyPopov wrote:
TheDrake wrote:- WARNING, NARS REMOVED. It gives to me instabilty.
can you make variant with NARS patch for me for test - NARS reconnect is VERY NEEDED for CIS countries!!!
I'll do as soon as I'll be able to compile conditionally with and without NARS.
I'm also evaluating NARSv2. crond is already enabled.
Bye
Paolo.
Sorry, posts 626 to 625 are missing from our archive.
Page 25 of 49