Do you know if it's possible to use H3C WA2110-AG with OpenWRT?
Topic: Firmware for H3C WA2110-AG?
The content of this topic has been archived on 22 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
Hardware specs from http://download.h3c.com/download.do?id=1154612
CPU type: ATHEROS MIPS 2313 180MHz
32M bytes SDRAM Memory
4M bytes Flash Memory
Several devices in the ToH with this SoC supported:
https://openwrt.org/toh/views/toh_dev_a … *~%5D=2313
However, it has only 4MB flash / 32MB RAM -> too little for up-to-date OpenWrt, see https://openwrt.org/supported_devices/432_warning
Advice: Invest $20 and get a new device with sufficient flash + RAM and you will be happier than with this ancient device.
The discussion might have continued from here.
Page 1 of 1