hi at all,

I have configured a firmware based on openwrt + asterisk 1.2.10 and webif console. I have put a script asterisk webif console and a bash script for dydns service.

Hardware (attention use this firmware only for this access point linksys WRT54GL)

for download click http://www.rsmanagement.org/openwrt/fir … 4gl_05.trx

IP: 192.168.1.2
root password is AGRIGENTO

Features:
OpenWRT RC5
Webif v. 0.2-soc
Asterisk 1.2.10
dydns script v. 1.0-soc
asterisk webif 1.1-soc

Asterisk features:
Full asterisk configuration for sip provider (for italian user messagenet.it).
3 account sip (1234 - 1235- 1236)
Webif console and web editor
Authentication code for external pstn calls
Extention for sip gateway connection (ip 192.168.1.3)
Italian sound installed

note:
For download firmware backup open ssh console (with putty or sshcommand) and give this command:
# dd if=/dev/mtdblock/1 of=/tmp/firmware.trx

after go http://192.168.1.2/firmware.trx download and save it.

Upgrading / Restoring:
To reflash from within openwrt you will need to use a trx file:
# mtd -r write firmware.trx linux.

Thx for your comment and replies.
salvatore.crapanzano(at)gmail.com

(Last edited by socrat3 on 2 Nov 2006, 02:13)

I'm interested in running openwrt on asterisk but I preffer to use the original firmware.
I've tried to install asterisk but I have some configuration difficulties, for now what I need is just to let 2 ip phones/softphones talking beetween them on the wrt wireless network. I have been able to make two softphones (x-lite) registering on asterisk on my wrt box but if I try to make a call beetween then it doesn't' work.
For now I'm just interested in having phones talking beetween them locally because I haven't an account with a sip provider.
However your idea is interesting.

you can use my firmware. This is original openwrt rc5 but it is configured with a stable asterisk 1.2.10.

It has 3 sip account:

1234 1235 1236

I think that this configuration is good for your necessity.

(Last edited by socrat3 on 3 Nov 2006, 20:06)

Sorry for answering just now but I don't trust flashing a non official openwrt release and I can't take the risk of briking another router.
However being interested in your setup I dowloaded your firmware and tried to extract it with these tools :

http://www.bitsum.com/firmware_mod_kit.htm

Then I tried to run the excract firmware script on your trx file but it says me that your image in unsupported ..
How did you get that image ? You didnt' rebuild openwrt right ? (you should get a bin image for wrt54gl and not a trx image if you use imagebuilder to rebuild your customized firmware) . 

I would apprieciate just to have a look at your asterisk conf files.

Thanks.
KiaZ