After flashing openwrt with olsr-ipkg and pppoe-ipkg, i tried to seperate the bridge by nvram settings. Then my WRT was dead. 2 Month later (now) i was able to get a serial port module working.
Now i had success connecting to CFE by serial port module (first one was not good this one now works for me) but i don't know what i can do to make my wrt54g work again.
It is a V2.0 WRT54G. And CFE sais this on boot and than is ready for input at the console, seems to break the boot at this place:
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fri Feb 27 15:23:38 CST 2004 (root@honor)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.Initializing Arena.
Initializing Devices.
CPU type 0x29007: 192MHz
Total memory: 0x2000000 bytes (32MB)Total memory used by CFE: 0x80334DC0 - 0x8043A310 (1070416)
Initialized Data: 0x80334DC0 - 0x80336F40 (8576)
BSS Area: 0x80336F40 - 0x80338310 (5072)
Local Heap: 0x80338310 - 0x80438310 (1048576)
Stack Area: 0x80438310 - 0x8043A310 (8192)
Text (code) segment: 0x80300000 - 0x8030F220 (61984)
Boot area (physical): 0x0043B000 - 0x0047B000
Relocation Factor: I:00000000 - D:00000000Boot version: v2.3
The boot is CFEmac_init(): Find mac [00:0F:66:D9:9D:50] in location 1
Nothing...
Reading :: Failed.: Error
CFE>
Anybody here with some hints for revival?