OpenWrt Forum Archive

Topic: Kamikaze 2.6 webif^2 r2017 WGT634U usr/lib/webif/apply.sh: 283: Syntax

The content of this topic has been archived on 6 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
breath
22 Dec 2006, 21:33

if I try and apply a change r2017 Kamikaze 2.6
system->status-> change the host name

/usr/lib/webif/apply.sh: /usr/lib/webif/apply.sh: 283: Syntax error: ")" unexpected (expecting ";;")

line 283 in /usr/lib/webif/apply.sh
"/tmp/.uci/webif") init_theme;;

Cheers

also if you build the webif^2 into the image you never have to login,
if you delete the webif package off the webif page and the do

  ipkg install webif_0.3-2_mipsel.ipk

then you have to login to webif as below, but still have the apply problem on varous pages

System Information
Firmware              OpenWrt Kamikaze - With X-Wrt Extensions r5891
Kernel          Linux 2.6.19.1 #1 Thu Dec 21 13:54:28 EST 2006
MAC          00:09:5B:xx:xx:xx
Device         unidentified (WGT634U)
Board         Broadcom BCM47xx
Username          root

Web mgt. console          Webif2
Version        r2017

(Last edited by breath on 22 Dec 2006, 21:46)

Post #2
db90h
24 Dec 2006, 06:54

The kamikaze version of the webif is so alpha that reporting bugs isn't appropriate, but I appreciate your intent. Most things are not done at all, not working, or otherwise a mess.

The discussion might have continued from here.