Topic: Tp-link Tl-wr703n

The content of this topic has been archived between 18 Mar 2015 and 7 May 2018. Unfortunately there are posts – most likely complete pages – missing.

Page 40 of 40

Post #976

almogas

31 May 2013, 12:04

hey,
i bouth wr703n.
i install the openwrt ,
and now i cant do nothing,

when i conect the router to the pc with the cable the led flash slowly for 5 secend,
then he flast fast,and then we light constantly.

i try to do telnet 192.168.1.1

but he return to me.
connection to 192.168.1.1 could not open connection to the host,on port 23:connect faild.

what can i do?

i check and the version is lower then 1.7
ihave windows 7
thank you(the power for the router i give from the usb port on my computer

thank

Post #977

lizby

31 May 2013, 12:23

>i try to do telnet 192.168.1.1

Is the lan ip on your win7 in the range of 192.168.1.2-254?

>the power for the router i give from the usb port on my computer

Might be insufficient at 500mA max.

(Last edited by lizby on 31 May 2013, 12:24)

Post #978

robthebrew

31 May 2013, 12:51

It sounds like power is OK. check the IP of the computer. Check the ethernet cable is OK.
What openWRT did you install (path to download)?

Post #979

almogas

31 May 2013, 16:37

the ip is not what you wrote;
i change it by netsh interface commend.

but its still not working.

and i dont know what i insall, i think i take it from the manue:

http://clockroom.freeiz.com/openwrt/ope … actory.bin

but i dont shure;

Post #980

almogas

2 Jun 2013, 15:28

some one?

Post #981

twinclouds

2 Jun 2013, 18:12

almogas wrote:

the ip is not what you wrote;
i change it by netsh interface commend.
but its still not working.
and i dont know what i insall, i think i take it from the manue:
http://clockroom.freeiz.com/openwrt/ope … actory.bin
but i dont shure;

I have never used netsh command. Why don't you just change the tcp/ipv4 parameters in "change adapter setting"? It always works for me.
The LED as you described looks normal.

(Last edited by twinclouds on 2 Jun 2013, 18:13)

Post #982

almogas

2 Jun 2013, 22:08

its still not working for me.

i connect the router to pc, by the internet cable, and conect power by the usb cable.

i whet till the windows 7 tell me that their is no interner line (by sign of computer with yellow triangle.

then i go to the change adapter setting, go chank tcp/ipv4.

change them to ip 192.168.2.1 mask 255.255.255.0 gatway 192.168.1.1

then i wait again to the yellow triangle,

go to start cmd.
and write telnet 192.168.1.1 and enter

tell me if i do it right and what the problem can be.

thank you

Post #983

pepe2k

2 Jun 2013, 22:09

almogas wrote:

its still not working for me.
i connect the router to pc, by the internet cable, and conect power by the usb cable.
i whet till the windows 7 tell me that their is no interner line (by sign of computer with yellow triangle.
then i go to the change adapter setting, go chank tcp/ipv4.
change them to ip 192.168.2.1 mask 255.255.255.0 gatway 192.168.1.1
then i wait again to the yellow triangle,
go to start cmd.
and write telnet 192.168.1.1 and enter
tell me if i do it right and what the problem can be.
thank you

Should be 192.168.1.2

Post #984

twinclouds

3 Jun 2013, 01:39

almogas wrote:

its still not working for me.
i connect the router to pc, by the internet cable, and conect power by the usb cable.
i whet till the windows 7 tell me that their is no interner line (by sign of computer with yellow triangle.
then i go to the change adapter setting, go chank tcp/ipv4.
change them to ip 192.168.2.1 mask 255.255.255.0 gatway 192.168.1.1
then i wait again to the yellow triangle,
go to start cmd.
and write telnet 192.168.1.1 and enter
tell me if i do it right and what the problem can be.
thank you

I never use the command prompt. I always use putty. Command is no good anyone once you get to ssh.
You can try ping 192.168.1.1. If ping has response, your router is fine. Just use Putty (set to telnet, since the default is ssh) everything should be fine.
Also, as pepe2k said you should set your computer ip to 192.168.1.2.

Post #985

twinclouds

6 Jun 2013, 19:49

I would like to use my 703n as a wireless webcam for monitoring my yard. I tried mjpg_streamer and motion and both works on ethernet. However I have difficulty to set up 703n as a remote server. Specifically, I want to configure its wlan0 to connect to my home wifi network and access from the ethernet or wifi inside my house. I can set it up as a bridge or repeater and connect to my wifi network (say at 192.168.1.x) and access openwrt from the lan port (a different subnet, say 192.168.0.x). However, I have difficulty to access it from the main network. Can someone give me a simple solution, preferably configure it in luci.
This situation may have been discussed before but I cannot find the exact way to do what I need. Sorry if I overlooked and please point to the right references for me. Thanks.
Edit:
This can be done. The easiest way is probably use Gargoyle.

(Last edited by twinclouds on 24 Jun 2013, 20:05)

Post #986

farguis

17 Jul 2013, 09:47

hi, i have wr703N with Openwrt. The problem is i need use serial out but this router and only have one serial port then kernel is used this port as console. i need erase this console, i have clean this port. i have read something of change menu_kernel but i dont know which change it. i have used /dev/ttyATH0 as port.
i have read something of change /etc/inittab but i dont have nothing with one port.
What can i do? thanks.

Post #987

fpopic

23 Jul 2013, 17:03

which is the best EXTERNAL ANTENNA MOD for wr703n from wiki ?

(Last edited by fpopic on 23 Jul 2013, 22:49)

Post #988

virusranger

13 Aug 2013, 14:18

anyone test with chip 8187l ? any lucky with speed connetion?

Post #989

mrscruffy

3 Oct 2013, 18:04

I've just received my first WR703N - I think it was version 1.8

The install of Open Wrt went without a hitch but I have a problem with USB support.

If I mount a USB and issue a reboot the WR703N will not boot. I have to enter failsafe mode and issue a firstboot command.

The USB successfully mounts because I am able to write to a file.

Any ideas?

Thanks

Post #990

kologsolomon

31 Mar 2014, 13:17

dyq wrote:

Sorry of my bad English

I just bought a TP-LINK TL-WR703N. It's very cheap (RMB 99, about $15), but seems only produce for China.

It has 1x LAN port, 1x USB 2.0, AR9331 chipset, 4MB Flash and 32MB RAM.

Photos (not mine):
http://www.right.com.cn/forum/thread-52557-1-1.html

official website
http://www.tp-link.cn/pages/product-detail.asp?d=225

ttl (aka Serial):
on board TP_OUT is tx, TP_IN is rx.

ttl output:

U-Boot 1.1.4 (Aug 27 2011 - 10:39:39)

AP121-2MB (ar9330) U-boot

DRAM:  32 MB
led turning on for 1s...
id read 0x100000ff
flash size 4194304, sector count = 64
Flash:  4 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0x5 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
ag7240_phy_setup 
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs26_reg_init_lan
ATHRS26: resetting s26
ATHRS26: s26 reset done
ag7240_phy_setup 
eth1 up
eth0, eth1
Autobooting in 1 seconds
## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... OK

Starting kernel ...

Booting AR9330(Hornet)...
Linux version 2.6.31--LSDK-9.2.0.312 (root@bogon) (gcc version 4.3.3 (GCC) ) #128 Fri Aug 26 14:58:53 CST 2011
flash_size passed from bootloader = 4
CPU revision is: 00019374 (MIPS 24Kc)
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
Zone PFN ranges:
  Normal   0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00002000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: console=ttyS0,115200 root=31:02 rootfstype=squashfs init=/sbin/init mtdparts=ar7240-nor0:128k(u-boot),1024k(kernel),2816(rootfs),64k(config),64k(ART) mem=32M
PID hash table entries: 128 (order: 7, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 29864k/32768k available (1888k kernel code, 2904k reserved, 524k data, 116k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
plat_time_init: plat time init done
Calibrating delay loop... 266.24 BogoMIPS (lpj=532480)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
===== ar7240_platform_init: 0


Whoops! This kernel is for product wr703 v1.0!

bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
AR7240 GPIOC major 0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NTFS driver 2.1.29 [Flags: R/O].
msgmni has been set to 58
alg: No test for lzma (lzma-generic)
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
ttyS0: detected caps 00000000 should be 00000100
serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
console [ttyS0] enabled
PPP generic driver version 2.4.2
NET: Registered protocol family 24
cmdlinepart partition parsing not available
set partition boot 
set partition kernel 
set partition rootfs 
set partition config 
set partition art 
set partition arching for RedBoot partition table
5 RedBoot partitions found on MTD device ar7240-nor0
Creating 5 MTD partitions on "ar7240-nor0":
0x000000000000-0x000000020000 : "boot"
0x000000020000-0x000000120000 : "kernel"
0x000000120000-0x0000003e0000 : "rootfs"
0x0000003e0000-0x0000003f0000 : "config"
0x0000003f0000-0x000000400000 : "art"
->Oops: flash id 0x10215 . 
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Port Status 1c000004 
ar7240-ehci ar7240-ehci.0: ATH EHCI
ar7240-ehci ar7240-ehci.0: new USB bus registered, assigned bus number 1
ehci_reset Intialize USB CONTROLLER in host mode: 3
ehci_reset Port Status 1c000000 
ar7240-ehci ar7240-ehci.0: irq 3, io mem 0x1b000000
ehci_reset Intialize USB CONTROLLER in host mode: 3
ehci_reset Port Status 1c000000 
ar7240-ehci ar7240-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
TCP cubic registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
ar7240wdt_init: Registering WDT success
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 116k freed
====>slow_led_expire 621: here
===>slow_led_expire 625: off
init started:  BusyBox v1.01 (2011.04.01-07:49+0000) multi-call binary
====>slow_led_expire 621: here
===>slow_led_expire 636: on
This Board use 2.6.31
xt_time: kernel timezone is -0000
nf_conntrack version 0.5.0 (512 buckets, 5120 max)
====>slow_led_expire 621: here
===>slow_led_expire 625: off
ip_tables: (C) 2000-2006 Netfilter Core Team
insmod: cannot open module `/lib/modules/2.6.31/kernel/iptable_raw.ko': No such file or directory
====>slow_led_expire 621: here
===>slow_led_expire 636: on
insmod: cannot open module `/lib/modules/2.6.31/kernel/flashid.ko': No such file or directory
PPPoL2TP kernel driver, V1.0
PPTP driver version 0.8.3
insmod: cannot open module `/lib/modules/2.6.31/kernel/harmony.ko': No such file or directory
====>slow_led_expire 621: here
===>slow_led_expire 625: off

 (none) mips #128 Fri Aug 26 14:58:53 CST 2011 (none)
(none) login: Now flash open!
Now flash open!
====>slow_led_expire 621: here
===>slow_led_expire 636: on
ATHR_GMAC: Length per segment 1536
ATHR_GMAC: fifo cfg 3 01f00140
ATHR_GMAC: Mac address for unit 1:bf1f0006
ATHR_GMAC: 12:64:c3:58:67:a4 
ATHR_GMAC: Max segments per packet :   1
ATHR_GMAC: Max tx descriptor count :   40
ATHR_GMAC: Max rx descriptor count :   96
ATHR_GMAC: Mac capability flags    :   4D83
ATHR_GMAC: Mac address for unit 0:bf1f0000
ATHR_GMAC: 01:9c:b5:c8:b7:c9 
====>slow_led_expire 621: here
===>slow_led_expire 625: off
ATHR_GMAC: Max segments per packet :   1
ATHR_GMAC: Max tx descriptor count :   40
ATHR_GMAC: Max rx descriptor count :   252
ATHR_GMAC: Mac capability flags    :   4403
athr_gmac_ring_alloc Allocated 640 at 0x81e77800
athr_gmac_ring_alloc Allocated 4032 at 0x81d63000
Setting Drop CRC Errors, Pause Frames and Length Error frames 
Setting PHY...mac 0
====>slow_led_expire 621: here
===>slow_led_expire 636: on
====>slow_led_expire 621: here
===>slow_led_expire 625: off
====>slow_led_expire 621: here
===>slow_led_expire 636: on
athr_gmac_ring_alloc Allocated 640 at 0x81e77400
athr_gmac_ring_alloc Allocated 1536 at 0x81f25000
====>slow_led_expire 621: here
===>slow_led_expire 625: off
====>slow_led_expire 621: here
===>slow_led_expire 636: on
athr_gmac_mii_setup: MDC check failed
Setting Drop CRC Errors, Pause Frames and Length Error frames 
ATHRS26: resetting s26
ATHRS26: s26 reset done
Setting PHY...mac 1
====>slow_led_expire 621: here
===>slow_led_expire 625: off
device eth0 entered promiscuous mode
Now flash open!
====>slow_led_expire 621: here
===>slow_led_expire 636: on
====>slow_led_expire 621: here
===>slow_led_expire 625: off
====>slow_led_expire 621: here
===>slow_led_expire 636: on
nf_conntrack_rtsp v0.6.21 loading
nf_nat_rtsp v0.6.21 loading
====>slow_led_expire 621: here
===>slow_led_expire 625: off
asf: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
====>slow_led_expire 621: here
===>slow_led_expire 636: on
ath_hal: 0.9.17.1 (AR9380, DEBUG, REGOPS_FUNC, WRITE_EEPROM, 11D)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
====>slow_led_expire 621: here
===>slow_led_expire 625: off
====>slow_led_expire 621: here
ath_ahb: 9.2.0_U5.508 (Atheros/multi-bss)
Boostrap clock 25MHz
ar9300RadioAttach: Need analog access recipe!!
Restoring Cal data from Flash
ath_get_caps[4735] rx chainmask mismatch actual 1 sc_chainmak 0
ath_get_caps[4710] tx chainmask mismatch actual 1 sc_chainmak 0
wifi0: Atheros 9380: mem=0xb8100000, irq=2
wlan_vap_create : enter. devhandle=0x80c042c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
wlan_vap_create : exit. devhandle=0x80c042c0, opmode=IEEE80211_M_HOSTAP, flags=0x1.
VAP device ath0 created 
 
 DES SSID SET=TP-LINK_620550 
ieee80211_scan_unregister_event_handler: Failed to unregister evhandler=c0a048a0 arg=81fa8ac0
wlan_vap_delete : enter. vaphandle=0x80e60000
wlan_vap_delete : exit. vaphandle=0x80e60000
wlan_vap_create : enter. devhandle=0x80c042c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
wlan_vap_create : exit. devhandle=0x80c042c0, opmode=IEEE80211_M_HOSTAP, flags=0x1.
VAP device ath0 created 
 
 DES SSID SET=TP-LINK_620550 
 ieee80211_ioctl_siwmode: imr.ifm_active=393856, new mode=3, valid=1 
WARNING: Fragmentation with HT mode NOT ALLOWED!!
device ath0 entered promiscuous mode
br0: port 2(ath0) entering forwarding state
 ieee80211_ioctl_siwmode: imr.ifm_active=1442432, new mode=3, valid=1 
br0: port 2(ath0) entering disabled state
 
 DES SSID SET=TP-LINK_620550 
br0: port 2(ath0) entering forwarding state

I have already run an OpenWRT on it,but have some bugs, sysupgrade not work, and I can't find sysled's gpio, so sysled not work.

The discussion might have continued from here.

Page 40 of 40