OpenWrt Forum Archive

Topic: TP-Link TL-MR3420 V2 (2.1)

The content of this topic has been archived between 9 Mar 2018 and 22 Apr 2018. Unfortunately there are posts – most likely complete pages – missing.

I bought this router this afternoon and I'd like to help port OpenWRT onto the new HW.
I am searching for some experience - how to start and what tools to use.
I am newbie to HW hacking, but I have limited experience with serial consoles on other devices.

You can start by posting hi res pictures of the board wink

If we are lucky the fw for mr3220 v2 will work ...

Here is picture of 3420v2

http://i50.tinypic.com/2iw0up2.jpg

nebbia88 wrote:

is it yours? you confirm it has the same chips of mr3220 v2?

https://forum.openwrt.org/viewtopic.php … 76#p180376

No , i found this picture on the net

3420v2:

Chip : Atheros AL9341-AL1A

Ram chip : Zentel A3S56D40FTP-G5

3220v2:

Chip : Atheros AL9331-AL1A

Ram chip : Zentel A3S56D40FTP-G5

it's seems they are perfectly match except the chip

Last update Patch with no USB Power

Index: target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
===================================================================
--- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c    (revision 35052)
+++ target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c    (working copy)
@@ -1,13 +1,14 @@
 /*
- *  TP-LINK TL-WR841N/ND v8 board support
+ *  TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 board support
  *
- *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
  *  by the Free Software Foundation.
  */
 
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach-ath79/ath79.h>
@@ -18,9 +19,13 @@
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "dev-m25p80.h"
+#include "dev-usb.h"
 #include "dev-wmac.h"
 #include "machtypes.h"
 
+#define TL_WR841NV8_GPIO_BTN_RESET    17
+#define TL_WR841NV8_GPIO_BTN_WPS    16
+
 #define TL_WR841NV8_GPIO_LED_WLAN    13
 #define TL_WR841NV8_GPIO_LED_QSS    15
 #define TL_WR841NV8_GPIO_LED_WAN    18
@@ -30,8 +35,8 @@
 #define TL_WR841NV8_GPIO_LED_LAN4    12
 #define TL_WR841NV8_GPIO_LED_SYSTEM    14
 
-#define TL_WR841NV8_GPIO_BTN_RESET    17
-#define TL_WR841NV8_GPIO_SW_RFKILL    16
+#define TL_MR3420V2_GPIO_LED_3G        11
+#define TL_MR3420V2_GPIO_USB_POWER    8
 
 #define TL_WR841NV8_KEYS_POLL_INTERVAL    20    /* msecs */
 #define TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR841NV8_KEYS_POLL_INTERVAL)
@@ -78,44 +83,44 @@
         .name        = "tp-link:green:wlan",
         .gpio        = TL_WR841NV8_GPIO_LED_WLAN,
         .active_low    = 1,
+    }, {
+        /* the 3G LED is only present on the MR3420 v2 */
+        .name        = "tp-link:green:3g",
+        .gpio        = TL_MR3420V2_GPIO_LED_3G,
+        .active_low    = 1,
     },
 };
 
 static struct gpio_keys_button tl_wr841n_v8_gpio_keys[] __initdata = {
     {
-        .desc        = "Reset button",
+        .desc        = "reset",
         .type        = EV_KEY,
         .code        = KEY_RESTART,
         .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
         .gpio        = TL_WR841NV8_GPIO_BTN_RESET,
         .active_low    = 1,
     }, {
-        .desc        = "RFKILL switch",
-        .type        = EV_SW,
-        .code        = KEY_RFKILL,
+        /* the WPS button is only present on the MR3420 v2 */
+        .desc        = "WPS",
+        .type        = EV_KEY,
+        .code        = KEY_WPS_BUTTON,
         .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
-        .gpio        = TL_WR841NV8_GPIO_SW_RFKILL,
+        .gpio        = TL_WR841NV8_GPIO_BTN_WPS,
         .active_low    = 0,
     }
 };
 
-static void __init tl_wr841n_v8_setup(void)
+static void __init tl_ap123_setup(void)
 {
     u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
     u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
 
-    ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio),
-                 tl_wr841n_v8_leds_gpio);
-
-    ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
-                    ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
-                    tl_wr841n_v8_gpio_keys);
-
     ath79_register_m25p80(&tl_wr841n_v8_flash_data);
 
     ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
 
     ath79_register_mdio(1, 0x0);
+    ath79_register_mdio(0, 0x0);
 
     ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
     ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
@@ -135,5 +140,35 @@
     ath79_register_wmac(ee, mac);
 }
 
-MIPS_MACHINE(ATH79_MACH_TL_WR841N_V8, "TL-WR841N-v8", "TP-LINK TL-WR841N/ND v8",
-         tl_wr841n_v8_setup);
+static void __init tl_wr841n_v8_setup(void)
+{
+    tl_ap123_setup();
+
+    ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio) - 1,
+                 tl_wr841n_v8_leds_gpio);
+    ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
+                    ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
+                    tl_wr841n_v8_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR841N_V8, "TL-WR841N-v8", 
+    "TP-LINK TL-WR841N/ND v8", tl_wr841n_v8_setup);
+
+static void __init tl_mr3420v2_setup(void)
+{
+    tl_ap123_setup();
+
+    gpio_request_one(TL_MR3420V2_GPIO_USB_POWER,
+             GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+             "USB power");
+    ath79_register_usb();
+
+    ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio),
+                 tl_wr841n_v8_leds_gpio);
+    ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
+                    ARRAY_SIZE(tl_wr841n_v8_gpio_keys) - 1,
+                    tl_wr841n_v8_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR3420_V2, "TL-MR3420-v2",
+    "TP-LINK TL-MR3420 v2", tl_mr3420v2_setup);
Index: target/linux/ar71xx/image/Makefile
===================================================================
--- target/linux/ar71xx/image/Makefile    (revision 35052)
+++ target/linux/ar71xx/image/Makefile    (working copy)
@@ -883,7 +883,7 @@
 $(eval $(call SingleProfile,TPLINKOLD,$(fs_squash),TLWR841NV15,tl-wr841nd-v1.5,TL-WR841N-v1.5,ttyS0,115200,0x08410002,2,4M))
 
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3220V1,tl-mr3220-v1,TL-MR3220,ttyS0,115200,0x32200001,1,4M))
-$(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3420,tl-mr3420-v1,TL-MR3420,ttyS0,115200,0x34200001,1,4M))
+$(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3420V1,tl-mr3420-v1,TL-MR3420,ttyS0,115200,0x34200001,1,4M))
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWA701,tl-wa701n-v1,TL-WA901ND,ttyS0,115200,0x07010001,1,4M))
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWA7510NV1,tl-wa7510n,TL-WA7510N,ttyS0,115200,0x75100001,1,4M))
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWA801NV1,tl-wa801nd-v1,TL-WA901ND,ttyS0,115200,0x08010001,1,4M))
@@ -907,6 +907,7 @@
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3020,tl-mr3020-v1,TL-MR3020,ttyATH0,115200,0x30200001,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3040,tl-mr3040-v1,TL-MR3040,ttyATH0,115200,0x30400001,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3220V2,tl-mr3220-v2,TL-MR3220-v2,ttyATH0,115200,0x32200002,1,4Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3420V2,tl-mr3420-v2,TL-MR3420-v2,ttyS0,115200,0x34200002,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR703,tl-wr703n-v1,TL-WR703N,ttyATH0,115200,0x07030101,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR740NV4,tl-wr740n-v4,TL-WR741ND-v4,ttyATH0,115200,0x07400004,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR741NV4,tl-wr741nd-v4,TL-WR741ND-v4,ttyATH0,115200,0x07410004,1,4Mlzma))
@@ -956,6 +957,7 @@
 $(eval $(call MultiProfile,OPENMESH,OM2P MR600))
 $(eval $(call MultiProfile,TEW652BRP,TEW652BRP_FW TEW652BRP_RECOVERY))
 $(eval $(call MultiProfile,TLMR3220,TLMR3220V1 TLMR3220V2))
+$(eval $(call MultiProfile,TLMR3420,TLMR3420V1 TLMR3420V2))
 $(eval $(call MultiProfile,TLWA801,TLWA801NV1))
 $(eval $(call MultiProfile,TLWA901,TLWA901NV1 TLWA901NV2))
 $(eval $(call MultiProfile,TLWA7510,TLWA7510NV1))
Index: target/linux/ar71xx/base-files/lib/ar71xx.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/ar71xx.sh    (revision 35052)
+++ target/linux/ar71xx/base-files/lib/ar71xx.sh    (working copy)
@@ -357,6 +357,9 @@
     *TL-MR3420)
         name="tl-mr3420"
         ;;
+    *"TL-MR3420 v2")
+        name="tl-mr3420-v2"
+        ;;
     *TL-WA7510N)
         name="tl-wa7510n"
         ;;
Index: target/linux/ar71xx/base-files/lib/upgrade/platform.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/upgrade/platform.sh    (revision 35052)
+++ target/linux/ar71xx/base-files/lib/upgrade/platform.sh    (working copy)
@@ -155,6 +155,7 @@
     tl-mr3220 | \
     tl-mr3220-v2 | \
     tl-mr3420 | \
+    tl-mr3420-v2 | \
     tl-wa7510n | \
     tl-wa901nd | \
     tl-wa901nd-v2 | \
Index: target/linux/ar71xx/base-files/etc/uci-defaults/leds
===================================================================
--- target/linux/ar71xx/base-files/etc/uci-defaults/leds    (revision 35052)
+++ target/linux/ar71xx/base-files/etc/uci-defaults/leds    (working copy)
@@ -159,6 +159,7 @@
     ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
     ;;
 
+tl-mr3420-v2 | \
 tl-wr841n-v8)
     ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
     ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
Index: target/linux/ar71xx/base-files/etc/uci-defaults/network
===================================================================
--- target/linux/ar71xx/base-files/etc/uci-defaults/network    (revision 35052)
+++ target/linux/ar71xx/base-files/etc/uci-defaults/network    (working copy)
@@ -143,6 +143,7 @@
     ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
     ;;
 
+tl-mr3420-v2 |\
 tl-wr841n-v8)
     ucidef_set_interfaces_lan_wan "eth1" "eth0"
     ucidef_add_switch "switch0" "1" "1"
Index: target/linux/ar71xx/base-files/etc/diag.sh
===================================================================
--- target/linux/ar71xx/base-files/etc/diag.sh    (revision 35052)
+++ target/linux/ar71xx/base-files/etc/diag.sh    (working copy)
@@ -132,6 +132,7 @@
     tl-mr3220 | \
     tl-mr3220-v2 | \
     tl-mr3420 | \
+    tl-mr3420-v2 | \
     tl-wa901nd | \
     tl-wa901nd-v2 | \
     tl-wr1041n-v2 | \
Index: target/linux/ar71xx/generic/profiles/tp-link.mk
===================================================================
--- target/linux/ar71xx/generic/profiles/tp-link.mk    (revision 35052)
+++ target/linux/ar71xx/generic/profiles/tp-link.mk    (working copy)
@@ -60,6 +60,29 @@
 $(eval $(call Profile,TLMR3420))
 
 
+define Profile/TLMR3220V2
+    NAME:=TP-LINK TL-MR3220 v2
+    PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
+endef
+
+define Profile/TLMR3220V2/Description
+    Package set optimized for the TP-LINK TL-MR3220 v2.
+endef
+$(eval $(call Profile,TLMR3220V2))
+
+
+define Profile/TLMR3420V2
+    NAME:=TP-LINK TL-MR3420 v2
+    PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
+endef
+
+define Profile/TLMR3420V2/Description
+    Package set optimized for the TP-LINK TL-MR3420 v2.
+endef
+$(eval $(call Profile,TLMR3420V2))
+
+
+
 define Profile/TLWR703
     NAME:=TP-LINK TL-WR703N
     PACKAGES:=kmod-usb-core kmod-usb2
Index: tools/firmware-utils/src/mktplinkfw.c
===================================================================
--- tools/firmware-utils/src/mktplinkfw.c    (revision 35052)
+++ tools/firmware-utils/src/mktplinkfw.c    (working copy)
@@ -34,6 +34,7 @@
 #define HWID_TL_MR3220_V1    0x32200001
 #define HWID_TL_MR3220_V2    0x32200002
 #define HWID_TL_MR3420_V1    0x34200001
+#define HWID_TL_MR3420_V2    0x34200002
 #define HWID_TL_WA701N_V1    0x07010001
 #define HWID_TL_WA7510N_V1    0x75100001
 #define HWID_TL_WA801ND_V1    0x08010001
@@ -175,8 +176,7 @@
         .kernel_ep    = 0x80060000,
         .rootfs_ofs    = 0x100000,
     }, {
-        /* terminating entry */
-    }
+        }
 };
 
 static struct board_info boards[] = {
@@ -201,6 +201,11 @@
         .hw_rev        = 1,
         .layout_id    = "4M",
     }, {
+        .id        = "TL-MR3420v2",
+        .hw_id        = HWID_TL_MR3420_V2,
+        .hw_rev        = 1,
+        .layout_id    = "4Mlzma",
+    }, {
         .id        = "TL-WA701Nv1",
         .hw_id        = HWID_TL_WA701N_V1,
         .hw_rev        = 1,

612-MIPS-ath79-TL-MR3420-v2-support.patch


--- 612-MIPS-ath79-TL-MR3420-v2-support    2013-01-08 01:01:02.000000000 +0700
+++ 612-MIPS-ath79-TL-MR3420-v2-support.patch    2013-01-08 00:59:59.000000000 +0700
@@ -0,0 +1,27 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -541,12 +541,13 @@
+     select ATH79_DEV_M25P80
+ 
+ config ATH79_MACH_TL_WR841N_V8
+-    bool "TP-LINK TL-WR841N/ND v8 support"
++    bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support"
+     select SOC_AR934X
+     select ATH79_DEV_ETH
+     select ATH79_DEV_GPIO_BUTTONS
+     select ATH79_DEV_LEDS_GPIO
+     select ATH79_DEV_M25P80
++    select ATH79_DEV_USB
+     select ATH79_DEV_WMAC
+ 
+ config ATH79_MACH_TL_WR941ND
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -79,6 +79,7 @@
+     ATH79_MACH_TL_MR3220,        /* TP-LINK TL-MR3220 */
+     ATH79_MACH_TL_MR3220_V2,    /* TP-LINK TL-MR3220 v2 */
+     ATH79_MACH_TL_MR3420,        /* TP-LINK TL-MR3420 */
++    ATH79_MACH_TL_MR3420_V2,    /* TP-LINK TL-MR3420 v2 */
+     ATH79_MACH_TL_WA7510N_V1,    /* TP-LINK TL-WA7510N v1*/
+     ATH79_MACH_TL_WA901ND,        /* TP-LINK TL-WA901ND */
+     ATH79_MACH_TL_WA901ND_V2,    /* TP-LINK TL-WA901ND v2 */

(Last edited by xopal on 8 Jan 2013, 11:18)

from that link, isn't this what you need:

+tl-mr3420-v2)
+    ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
+    ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
+    ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+    ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
+    ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+    ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+    ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
+    ;;

Forgive me if I am taking rubbish. I would also like to know an easy way or general way to find GPIOs without source code.
Finding unused ones seems trial and error after finding a pin tied up or down.
But how to identify those in use is a mystery to me (unless you have source code).

Thanks rob, this is my first trial build for this router I just followed what 3220v2 way to add into openwrt support, since this routers have same design in common except the chip.

Boot log with stock firmware ,before I flash it with my build :

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.01.01 12:26:53 =~=~=~=~=~=~=~=~=~=~=~=
                                                                                      f 7   $ $6>öÿ       $$$$6¶      $$$&$66ó    &>     $$$&66ÿ     $$$&&6÷  $    $$$f~   $&$ $66÷    $ $&4ó  $                 

U-Boot 1.1.4 (Jul  3 2012 - 15:12:08)

U-boot AP123


DRAM:  32 MB
id read 0x100000ff
Flash:  4 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag934x_enet_initialize...
wasp reset mask:c03300
WASP ----> S27 PHY
GMAC: cfg1 0x5 cfg2 0x7114
eth0: ba:be:fa:ce:08:41
s27 reg init 
athrs27_phy_setup ATHR_PHY_CONTROL 4: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4: 0x10
eth0 up
WASP ----> S27 PHY
GMAC: cfg1 0xf cfg2 0x7214
eth1: ba:be:fa:ce:08:41
s27 reg init lan 
ATHRS27: resetting s27
ATHRS27: s27 reset done
athrs27_phy_setup ATHR_PHY_CONTROL 0: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 1: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 2: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 3: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3: 0x10
eth1 up
eth0, eth1
Autobooting in 1 seconds
#$½½Ñ¥¹image at 9f020000 ...
   Uncompressing Kernel Image ... ÿÿOK

Starting kernel ...

Booting Atheros AR934x
 
Linux version 2.6.31--LSDK-9.2.0_U5.508 (zhongjin@rd3linux.tplink) (gcc version 4.3.3 (GCC) ) #61 Tue Jul 3 15:17:14 CST 2012
flash_size passed from bootloader = 4
Ram size passed from bootloader =33554432
CPU revision is: 0001974c (MIPS 74Kc)
ath_sys_frequency: cpu srif ddr srif cpu 535 ddr 400 ahb 200
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
Zone PFN ranges:
  Normal   0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00002000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: console=ttyS0,115200 root=31:2 rootfstype=squashfs init=/sbin/init mtdparts=ath-nor0:128k(u-boot),1024k(kernel),2816k(rootfs),64k(config),64k(art) mem=32M
PID hash table entries: 128 (order: 7, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 30132k/32768k available (1723k kernel code, 2636k reserved, 426k data, 112k init, 0k highmem)
NR_IRQS:128
plat_time_init: plat time init done
Calibrating delay loop... 267.26 BogoMIPS (lpj=534528)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
ATH GPIOC major 0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 58
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
console [ttyS0] enabled
PPP generic driver version 2.4.2
NET: Registered protocol family 24
5 cmdlinepart partitions found on MTD device ath-nor0
Creating 5 MTD partitions on "ath-nor0":
0x000000000000-0x000000020000 : "u-boot"
0x000000020000-0x000000120000 : "kernel"
0x000000120000-0x0000003e0000 : "rootfs"
0x0000003e0000-0x0000003f0000 : "config"
0x0000003f0000-0x000000400000 : "art"
->Oops: flash id 0x10215 . 
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Port Status 1c000004 
ath-ehci ath-ehci.0: ATH EHCI
ath-ehci ath-ehci.0: new USB bus registered, assigned bus number 1
ehci_reset Intialize USB CONTROLLER in host mode: 13
ehci_reset Port Status 1c000000 
ath-ehci ath-ehci.0: irq 3, io mem 0x1b000000
ehci_reset Intialize USB CONTROLLER in host mode: 13
ehci_reset Port Status 1c000000 
ath-ehci ath-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
TCP cubic registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
athwdt_init: Registering WDT success
ath_otp_init: Registering OTP success
ath_clksw_init: Registering Clock Switch Interface success
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 112k freed

init started:  BusyBox v1.01 (2012.02.08-01:42+0000) multi-call binary
This Board use 2.6.31
xt_time: kernel timezone is -0000
nf_conntrack version 0.5.0 (512 buckets, 5120 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
insmod: cannot open module `/lib/modules/2.6.31/kernel/iptable_raw.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.31/kernel/flashid.ko': No such file or directory
PPPoL2TP kernel driver, V1.0
PPTP driver version 0.8.3
insmod: cannot open module `/lib/modules/2.6.31/kernel/harmony.ko': No such file or directory

Now flash open!
Now flash open!
 (none) mips #61 Tue Jul 3 15:17:14 CST 2012 (none)

(none) login: ATHR_GMAC: Length per segment 1536
ATHR_GMAC: fifo cfg 3 01f00140
ATHR_GMAC: RX TASKLET - Pkts per Intr:32
mac:1 Registering S27....
ATHR_GMAC: Max segments per packet :   1
ATHR_GMAC: Max tx descriptor count :   40
ATHR_GMAC: Max rx descriptor count :   128
ATHR_GMAC: Mac capability flags    :   2D82
ATHR_GMAC: RX TASKLET - Pkts per Intr:32
mac:0 Registering S27....
ATHR_GMAC: Max segments per packet :   1
ATHR_GMAC: Max tx descriptor count :   40
ATHR_GMAC: Max rx descriptor count :   128
ATHR_GMAC: Mac capability flags    :   2582
athr_gmac_ring_alloc Allocated 640 at 0x81e80c00
athr_gmac_ring_alloc Allocated 2048 at 0x81ccb000
WASP ----> S27 PHY MDIO
Setting Drop CRC Errors, Pause Frames and Length Error frames 
Setting PHY...
athr_gmac_ring_alloc Allocated 640 at 0x81e80800
athr_gmac_ring_alloc Allocated 2048 at 0x81ebc800
WASP ----> S27 PHY MDIO
Setting Drop CRC Errors, Pause Frames and Length Error frames 
ATHRS27: resetting s27
ATHRS27: s27 reset done
++++ athrs27_igmp_setup once
port0 vid is 0xb000b
port1 vid is 0x30003
port2 vid is 0x50005
port3 vid is 0x70007
port4 vid is 0x90009
++ PVID: 0x0000000b, bitmap: 0x0000001f
++ PVID: 0x00000003, bitmap: 0x0000001f
++ PVID: 0x00000005, bitmap: 0x0000001f
K+ PVID: 0x00000007, bitmap: 0x0000001f
++ PVID: 0x00000009, bitmap: 0x0000001f
vtable vid: 0x00000002, bitmap 0x00000003
vtable vid: 0x00000004, bitmap 0x00000005
vtable vid: 0x00000006, bitmap 0x00000007
ÿvtable vid: 0x00000008, bitmap 0x00000009
vtable vid: 0x0000000a, bitmap 0x0000000b
vtable vid: 0x0000000c, bitmap 0x0000000d
vtable vid: 0x0000000e, bitmap 0x0000000f
vtable vid: 0x00000010, bitmap 0x00000011
vtable vid: 0x00000012, bitmap 0x00000013
vtable vid: 0x00000014, bitmap 0x00000015
vtable vid: 0x00000016, bitmap 0x00000017
vtable vid: 0x00000018, bitmap 0x00000019
vtable vid: 0x0000001a, bitmap 0x0000001b
vtable vid: 0x0000001c, bitmap 0x0000001d
vtable vid: 0x0000001e, bitmap 0x0000001f
vtable vid: 0x00000020, bitmap 0x00000021
Setting PHY...
device eth0 entered promiscuous mode
athr_gmac_ring_free Freeing at 0x81e80c00
athr_gmac_ring_free Freeing at 0x81ccb000
athr_gmac_ring_alloc Allocated 640 at 0x81e80c00
athr_gmac_ring_alloc Allocated 2048 at 0x81ebb800
WASP ----> S27 PHY MDIO
Setting Drop CRC Errors, Pause Frames and Length Error frames 
Setting PHY...
Now flash open!
athr_gmac_ring_free Freeing at 0x81e80800
athr_gmac_ring_free Freeing at 0x81ebc800
athr_gmac_ring_alloc Allocated 640 at 0x81e80800
athr_gmac_ring_alloc Allocated 2048 at 0x81ebc000
WASP ----> S27 PHY MDIO
Setting Drop CRC Errors, Pause Frames and Length Error frames 
Setting PHY...
====>>>>DHCP start.dhcpc.c,dhcpcStart,914 
====>>>>DHCP end.dhcpc.c,dhcpcStart,974 
nf_conntrack_rtsp v0.6.21 loading
nf_nat_rtsp v0.6.21 loading
asf: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, 11D)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
ath_ahb: 9.2.0_U10.1020 (Atheros/multi-bss)
__ath_attach: Set global_scn[0]
ACBKMinfree = 48
ACBEMinfree = 32
ACVIMinfree = 16
ACVOMinfree = 0
CABMinfree = 48
UAPSDMinfree = 0
Restoring Cal data from Flash
ath_get_caps[5105] rx chainmask mismatch actual 3 sc_chainmak 0
ath_get_caps[5080] tx chainmask mismatch actual 3 sc_chainmak 0
wifi0: Atheros 9340: mem=0xb8100000, irq=2
====>>>>SystemMode : Normal Router 
wlan_vap_create : enter. devhandle=0x80c402c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
wlan_vap_create : exit. devhandle=0x80c402c0, opmode=IEEE80211_M_HOSTAP, flags=0x1.
VAP device ath0 created 
====>>>>wlan: rand channel 2
 
 
 DES SSID SET=YPKI-JATIM 
 ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1 
 Free buffer count 256 

sc_txq[0] : 
sc_txq[0] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[1] : 
sc_txq[1] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[2] : 
sc_txq[2] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[3] : 
sc_txq[3] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[6] : 
sc_txq[6] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[7] : 
sc_txq[7] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[8] : 
sc_txq[8] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  

 *********************************** 
athr_gmac_ring_free Freeing at 0x81e80800
athr_gmac_ring_free Freeing at 0x81ebc000
br0: port 1(eth0) entering disabled state
athr_gmac_ring_alloc Allocated 640 at 0x81e80800
athr_gmac_ring_alloc Allocated 2048 at 0x81f07800
WASP ----> S27 PHY MDIO
Setting Drop CRC Errors, Pause Frames and Length Error frames 
Setting PHY...
 Free buffer count 256 

sc_txq[0] : 
sc_txq[0] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[1] : 
sc_txq[1] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[2] : 
sc_txq[2] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[3] : 
sc_txq[3] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[6] : 
sc_txq[6] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[7] : 
sc_txq[7] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[8] : 
sc_txq[8] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  

 *********************************** 
device ath0 entered promiscuous mode
br0: port 2(ath0) entering forwarding state
 ieee80211_ioctl_siwmode: imr.ifm_active=918144, new mode=3, valid=1 
br0: port 2(ath0) entering disabled state
 
 DES SSID SET=YPKI-JATIM 
 Free buffer count 256 

sc_txq[0] : 
sc_txq[0] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[1] : 
sc_txq[1] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[2] : 
sc_txq[2] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[3] : 
sc_txq[3] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[6] : 
sc_txq[6] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[7] : 
sc_txq[7] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  
sc_txq[8] : 
sc_txq[8] : depth  is 0 
 aggr_depth is 0 tidBufCount 0  bufQCount 0 axq_cnt 0
  

 *********************************** 
br0: port 2(ath0) entering forwarding state
====>>>>cmdCtrl open success 
====>>>>eventCtrl open success 
====>>>>eventCtrl attach success 
ATHR_GMAC: GE0 RX DMA ENABLE

 TL-MR3420 mips #61 Tue Jul 3 15:17:14 CST 2012 (none)

TL-MR3420 login: 

There must be a problem with my build , I set ap121 type reference board and it shows ap123 on boot log, am I correct ?

After build my test firmware for 3420v2 flashed it to router, it becomes brick.

Here's my boot log

U-Boot 1.1.4 (Jul  3 2012 - 15:12:08)

U-boot AP123


DRAM:  32 MB
id read 0x100000ff
Flash:  4 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag934x_enet_initialize...
wasp reset mask:c03300
WASP ----> S27 PHY
GMAC: cfg1 0x5 cfg2 0x7114
eth0: ba:be:fa:ce:08:41
s27 reg init 
athrs27_phy_setup ATHR_PHY_CONTROL 4: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4: 0x10
eth0 up
WASP ----> S27 PHY
GMAC: cfg1 0xf cfg2 0x7214
eth1: ba:be:fa:ce:08:41
s27 reg init lan 
ATHRS27: resetting s27
ATHRS27: s27 reset done
athrs27_phy_setup ATHR_PHY_CONTROL 0: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 1: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 2: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 3: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3: 0x10
eth1 up
eth0, eth1
Autobooting in 1 seconds
## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 3.6.11 (xopal@debian) (gcc version 4.6.4 20121106 (prerelease) (Linaro GCC 4.6-2012.11) ) #1 Wed Jan 2 00:12:05 WIT 2013
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001974c (MIPS 74Kc)
[    0.000000] SoC: Atheros AR9341 rev 1
[    0.000000] Clocks: CPU:535.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=TL-MR3420-v2 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] MIPS: no machine found for id 'TL-MR3420-v2', supported machines:
[    0.000000] id                       name
[    0.000000] Generic                  Generic AR71XX/AR724X/AR913X based board
[    0.000000] ALFA-AP96                ALFA Network AP96
[    0.000000] ALFA-NX                  ALFA Network N2/N5
[    0.000000] ALL0258N                 Allnet ALL0258N
[    0.000000] ALL0315N                 Allnet ALL0315N
[    0.000000] AP113                    Atheros AP113
[    0.000000] AP121-MINI               Atheros AP121-MINI
[    0.000000] AP121                    Atheros AP121 reference board
[    0.000000] AP135-020                Atheros AP135-020 reference board
[    0.000000] AP136-020                Atheros AP136-020 reference board
[    0.000000] AP136-010                Atheros AP136-010 reference board
[    0.000000] AP81                     Atheros AP81 reference board
[    0.000000] AP83                     Atheros AP83
[    0.000000] AP96                     Atheros AP96
[    0.000000] AW-NR580                 AzureWave AW-NR580
[    0.000000] CAP4200AG                Senao CAP4200AG
[    0.000000] DB120                    Atheros DB120 reference board
[    0.000000] DIR-615-E4               D-Link DIR-615 rev. E4
[    0.000000] DIR-600-A1               D-Link DIR-600 rev. A1
[    0.000000] DIR-615-C1               D-Link DIR-615 rev. C1
[    0.000000] DIR-825-B1               D-Link DIR-825 rev. B1
[    0.000000] EW-DORIN-ROUTER          EmbWir-Dorin-Router
[    0.000000] EW-DORIN                 EmbWir-Dorin
[    0.000000] ALL0305                  Allnet ALL0305
[    0.000000] EAP7660D                 Senao EAP7660D
[    0.000000] JA76PF2                  jjPlus JA76PF2
[    0.000000] JA76PF                   jjPlus JA76PF
[    0.000000] JWAP003                  jjPlus JWAP003
[    0.000000] HORNET-UB                ALFA NETWORKS Hornet-UB
[    0.000000] MR600                    OpenMesh MR600
[    0.000000] MZK-W04NU                Planex MZK-W04NU
[    0.000000] MZK-W300NH               Planex MZK-W300NH
[    0.000000] NBG460N                  Zyxel NBG460N/550N/550NH
[    0.000000] OM2P-HS                  OpenMesh OM2P HS
[    0.000000] OM2P-LC                  OpenMesh OM2P LC
[    0.000000] OM2P                     OpenMesh OM2P
[    0.000000] PB42                     Atheros PB42
[    0.000000] PB44                     Atheros PB44 reference board
[    0.000000] PB92                     Atheros PB92
[    0.000000] 493G                     MikroTik RouterBOARD 493G
[    0.000000] 493                      MikroTik RouterBOARD 493/AH
[    0.000000] 450G                     MikroTik RouterBOARD 450G
[    0.000000] 450                      MikroTik RouterBOARD 450
[    0.000000] 435G                     MikroTik RouterBOARD 435G
[    0.000000] 433U                     MikroTik RouterBOARD 433UAH
[    0.000000] 433                      MikroTik RouterBOARD 433/AH
[    0.000000] 411U                     MikroTik RouterBOARD 411U
[    0.000000] 411                      MikroTik RouterBOARD 411/A/AH
[    0.000000] 751g                     MikroTik RouterBOARD 751G
[    0.000000] 751                      MikroTik RouterBOARD 751
[    0.000000] 750Gr3                   MikroTik RouterBOARD 750GL
[    0.000000] 750i                     MikroTik RouterBOARD 750
[    0.000000] 2011G                    MikroTik RouterBOARD 2011UAS-2HnD
[    0.000000] 2011L                    MikroTik RouterBOARD 2011L
[    0.000000] RW2458N                  Redwave RW2458N
[    0.000000] TEW-632BRP               TRENDnet TEW-632BRP
[    0.000000] TEW-673GRU               TRENDnet TEW-673GRU
[    0.000000] TEW-712BR                TRENDnet TEW-712BR
[    0.000000] TL-MR3040                TP-LINK TL-MR3040
[    0.000000] TL-MR11U                 TP-LINK TL-MR11U
[    0.000000] TL-MR3020                TP-LINK TL-MR3020
[    0.000000] TL-WR841N-v7             TP-LINK TL-WR841N/ND v7
[    0.000000] TL-M     Buffalo WZR-HP-AG300H
[    0.000000] WZR-HP-G450H             Buffalo WZR-HP-G450H
[    0.000000] ZCN-1523H-5              Zcomax ZCN-1523H-5
[    0.000000] ZCN-1523H-2              Zcomax ZCN-1523H-2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 29132k/32768k available (2105k kernel code, 3636k reserved, 396k data, 212k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.090000] MIPS: machine is Generic AR71XX/AR724X/AR913X based board
[    0.100000] bio: create slab <bio-0> at 0
[    0.110000] Switching to clocksource MIPS
[    0.120000] NET: Registered protocol family 2
[    0.120000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.120000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.130000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.130000] TCP: reno registered
[    0.140000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.140000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.150000] NET: Registered protocol family 1
[    0.170000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.170000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.180000] msgmni has been set to 56
[    0.190000] io scheduler noop registered
[    0.190000] io scheduler deadline registered (default)
[    0.200000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.220000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[    0.240000] TCP: cubic registered
[    0.240000] NET: Registered protocol family 17
[    0.250000] 8021q: 802.1Q VLAN Support v1.8
[    0.250000] turn off boot 

Seems that the kernel does not know the board.. Did you edit the same files like in this patch?

https://dev.openwrt.org/changeset/34780


also always make clean..

nebbia88 wrote:

Seems that the kernel does not know the board.. Did you edit the same files like in this patch?

https://dev.openwrt.org/changeset/34780


also always make clean..

Yeah you're right , I'll try another shot btw debricking this router is a piece of cake but I would like to inform you guys do not trying TFTP into this router a stock firmware which have the words "boot" or you'll be sorry.

Default uboot env. is set as follows:

Router ip : 192.168.1.111
TFTP host ip : 192.168.100

This is my TFTP process boot log :

Yes I did erase process but I forgot to set putty log on save mode big_smile

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.01.02 01:07:04 =~=~=~=~=~=~=~=~=~=~=~=
T T T T T 
Retry count exceeded; starting again
eth0 link down
Using eth1 device
TFTP from server 192.168.1.100; our IP address is 192.168.1.111
Filename 'code.bin'.
Load address: 0x81000000
Loading: *T T T T T T 
Abort
wasp> tftpboot 0x81000000 code.bin

Using eth1 device
TFTP from server 192.168.1.100; our IP address is 192.168.1.111
Filename 'code.bin'.
Load address: 0x81000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ######################################################
done
Bytes transferred = 3932160 (3c0000 hex)
wasp> cp.b 0x81000000 0x9f020000 0x3c0000

Copy to Flash... write addr: 9f020000
done
wasp> bootm 0x9f020000

## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... OK

Starting kernel ...

(Last edited by xopal on 2 Jan 2013, 00:26)

Finally I can port openwrt but something weird with my serial console, it's was stop after  "[    2.940000] turn off boot console early0" msg and just sit there.

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.01.02 12:41:15 =~=~=~=~=~=~=~=~=~=~=~=


U-Boot 1.1.4 (Jul  3 2012 - 15:12:08)

U-boot AP123


DRAM:  32 MB
id read 0x100000ff
Flash:  4 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag934x_enet_initialize...
wasp reset mask:c03300
WASP ----> S27 PHY
GMAC: cfg1 0x5 cfg2 0x7114
eth0: ba:be:fa:ce:08:41
s27 reg init 
athrs27_phy_setup ATHR_PHY_CONTROL 4: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4: 0x10
eth0 up
WASP ----> S27 PHY
GMAC: cfg1 0xf cfg2 0x7214
eth1: ba:be:fa:ce:08:41
s27 reg init lan 
ATHRS27: resetting s27
ATHRS27: s27 reset done
athrs27_phy_setup ATHR_PHY_CONTROL 0: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 1: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 2: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 3: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3: 0x10
eth1 up
eth0, eth1
Autobooting in 1 seconds
## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 3.6.11 (xopal@debian) (gcc version 4.6.4 20121106 (prerelease) (Linaro GCC 4.6-2012.11) ) #1 Wed Jan 2 12:06:38 WIT 2013
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001974c (MIPS 74Kc)
[    0.000000] SoC: Atheros AR9341 rev 1
[    0.000000] Clocks: CPU:535.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=TL-WR841N-v8 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 29132k/32768k available (2105k kernel code, 3636k reserved, 396k data, 212k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.090000] MIPS: machine is TP-LINK TL-WR841N/ND v8
[    0.510000] bio: create slab <bio-0> at 0
[    0.520000] Switching to clocksource MIPS
[    0.520000] NET: Registered protocol family 2
[    0.530000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.530000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.540000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.540000] TCP: reno registered
[    0.550000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.550000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.560000] NET: Registered protocol family 1
[    0.580000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.580000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.590000] msgmni has been set to 56
[    0.600000] io scheduler noop registered
[    0.600000] io scheduler deadline registered (default)
[    0.610000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
‚r²š‚‚‚‚êserial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[    0.640000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.650000] m25p80 spi0.0: found s25sl032a, expected m25p80
[    0.660000] m25p80 spi0.0: s25sl032a (4096 Kbytes)
[    0.660000] 5 tp-link partitions found on MTD device spi0.0
[    0.670000] Creating 5 MTD partitions on "spi0.0":
[    0.670000] 0x000000000000-0x000000020000 : "u-boot"
[    0.680000] 0x000000020000-0x0000000fbc8c : "kernel"
[    0.680000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.700000] 0x0000000fbc8c-0x0000003f0000 : "rootfs"
[    0.700000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.710000] mtd: partition "rootfs" set to be root filesystem
[    0.720000] mtd: partition "rootfs_data" created automatically, ofs=270000, len=180000 
[    0.730000] 0x000000270000-0x0000003f0000 : "rootfs_data"
[    0.730000] 0x0000003f0000-0x000000400000 : "art"
[    0.740000] 0x000000020000-0x0000003f0000 : "firmware"
[    0.770000] libphy: ag71xx_mdio: probed
[    0.770000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.330000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
[    1.340000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    1.900000] eth1: Found an AR934X built-in switch
[    2.930000] TCP: cubic registered
[    2.930000] NET: Registered protocol family 17
[    2.930000] 8021q: 802.1Q VLAN Support v1.8
[    2.940000] turn off boot console early0

But  telnet works here's the log :


=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.01.02 12:43:54 =~=~=~=~=~=~=~=~=~=~=~=
 === IMPORTANT ============================
  Use 'passwd' to set your login password
  this will disable telnet and enable SSH
 ------------------------------------------


BusyBox v1.19.4 (2013-01-02 11:40:30 WIT) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r34958)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/# 
root@OpenWrt:/# cat /proc/cpuinfo
system type             : Atheros AR9341 rev 1
machine                 : TP-LINK TL-WR841N/ND v8
processor               : 0
cpu model               : MIPS 74Kc V4.12
BogoMIPS                : 266.64
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : yes
hardware watchpoint     : yes, count: 4, address/irw mask: [0x0000, 0x0ff8, 0x0ff8, 0x0ff8]
ASEs implemented        : mips16 dsp
shadow register sets    : 1
kscratch registers      : 0
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

root@OpenWrt:/# df -h
Filesystem                Size      Used Available Use% Mounted on
rootfs                    1.5M    208.0K      1.3M  14% /
/dev/root                 1.5M      1.5M         0 100% /rom
tmpfs                    14.3M     64.0K     14.3M   0% /tmp
tmpfs                   512.0K         0    512.0K   0% /dev
/dev/mtdblock3            1.5M    208.0K      1.3M  14% /overlay
overlayfs:/overlay        1.5M    208.0K      1.3M  14% /
root@OpenWrt:/# ifconfig
br-lan    Link encap:Ethernet  HWaddr 64:70:02:6B:FB:1C  
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:446 errors:0 dropped:0 overruns:0 frame:0
          TX packets:193 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:36627 (35.7 KiB)  TX bytes:18610 (18.1 KiB)

eth0      Link encap:Ethernet  HWaddr 64:70:02:6B:FB:1B  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:4 

eth1      Link encap:Ethernet  HWaddr 64:70:02:6B:FB:1C  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:446 errors:0 dropped:0 overruns:0 frame:0
          TX packets:193 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:42871 (41.8 KiB)  TX bytes:18610 (18.1 KiB)
          Interrupt:5 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1248 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1248 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:84864 (82.8 KiB)  TX bytes:84864 (82.8 KiB)

root@OpenWrt:/# logread
Jan  1 00:00:11 OpenWrt syslog.info syslogd started: BusyBox v1.19.4
Jan  1 00:00:11 OpenWrt kern.notice kernel: klogd started: BusyBox v1.19.4 (2013-01-02 11:40:30 WIT)
Jan  1 00:00:11 OpenWrt kern.notice kernel: [    0.000000] Linux version 3.6.11 (xopal@debian) (gcc version 4.6.4 20121106 (prerelease) (Linaro GCC 4.6-2012.11) ) #1 Wed Jan 2 12:06:38 WIT 2013
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    0.000000] MyLoader: sysp=7e32261f, boardp=2eeaf96f, parts=7e16f0c5
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.000000] bootconsole [early0] enabled
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.000000] CPU revision is: 0001974c (MIPS 74Kc)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.000000] SoC: Atheros AR9341 rev 1
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.000000] Clocks: CPU:535.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.000000] Determined physical RAM map:
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.000000]  memory: 02000000 @ 00000000 (usable)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Jan  1 00:00:11 OpenWrt kern.warn kernel: [    0.000000] Zone ranges:
Jan  1 00:00:11 OpenWrt kern.warn kernel: [    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
Jan  1 00:00:11 OpenWrt kern.warn kernel: [    0.000000] Movable zone start for each node
Jan  1 00:00:11 OpenWrt kern.warn kernel: [    0.000000] Early memory node ranges
Jan  1 00:00:11 OpenWrt kern.warn kernel: [    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    0.000000] On node 0 totalpages: 8192
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 802d1340, node_mem_map 81000000
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    0.000000]   Normal zone: 64 pages used for memmap
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    0.000000]   Normal zone: 8128 pages, LIFO batch:0
Jan  1 00:00:11 OpenWrt kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Jan  1 00:00:11 OpenWrt kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Jan  1 00:00:11 OpenWrt kern.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Jan  1 00:00:11 OpenWrt kern.notice kernel: [    0.000000] Kernel command line:  board=TL-WR841N-v8 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 00:00:11 OpenWrt kern.notice kernel: [    0.000000] __ex_table already sorted, skipping sort
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.000000] Memory: 29132k/32768k available (2105k kernel code, 3636k reserved, 396k data, 212k init, 0k highmem)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.000000] NR_IRQS:51
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.070000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.080000] pid_max: default: 32768 minimum: 301
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.080000] Mount-cache hash table entries: 512
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.090000] NET: Registered protocol family 16
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.090000] MIPS: machine is TP-LINK TL-WR841N/ND v8
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.510000] bio: create slab <bio-0> at 0
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.520000] Switching to clocksource MIPS
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.520000] NET: Registered protocol family 2
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.530000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    0.530000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.100000] Backport based on wireless-testing.git master-2012-12-06
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.100000] compat.git: wireless-testing.git
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.120000] cfg80211: Calling CRDA to update world regulatory domain
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.120000] cfg80211: World regulatory domain updated:
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.120000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.120000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.120000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.120000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.120000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.120000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.320000] usbcore: registered new interface driver usbfs
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.320000] usbcore: registered new interface driver hub
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.330000] usbcore: registered new device driver usb
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    9.810000] ath: EEPROM regdomain: 0x0
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    9.810000] ath: EEPROM indicates default country code should be used
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    9.810000] ath: doing EEPROM country->regdmn map search
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    9.810000] ath: country maps to regdmn code: 0x3a
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    9.810000] ath: Country alpha2 being used: US
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    9.810000] ath: Regpair used: 0x3a
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    9.810000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jan  1 00:00:11 OpenWrt kern.debug kernel: [    9.810000] Registered led device: ath9k-phy0
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.810000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.810000] cfg80211: Calling CRDA for country: US
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.810000] cfg80211: Regulatory domain changed to country: US
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.810000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.810000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.810000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.810000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.810000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.810000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.810000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.860000] PPP generic driver version 2.4.2
Jan  1 00:00:11 OpenWrt kern.info kernel: [    9.910000] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 00:00:11 OpenWrt kern.info kernel: [   10.000000] NET: Registered protocol family 24
Jan  1 00:00:11 OpenWrt kern.info kernel: [   10.020000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 00:00:11 OpenWrt kern.info kernel: [   10.020000] ehci-platform ehci-platform: Generic Platform EHCI Controller
Jan  1 00:00:11 OpenWrt kern.info kernel: [   10.020000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Jan  1 00:00:11 OpenWrt kern.info kernel: [   10.050000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Jan  1 00:00:11 OpenWrt kern.info kernel: [   10.070000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Jan  1 00:00:11 OpenWrt kern.info kernel: [   10.070000] hub 1-0:1.0: USB hub found
Jan  1 00:00:11 OpenWrt kern.info kernel: [   10.070000] hub 1-0:1.0: 1 port detected
Jan  1 00:00:11 OpenWrt kern.info kernel: [   10.080000] nf_conntrack version 0.5.0 (458 buckets, 1832 max)
Jan  1 00:00:14 OpenWrt daemon.notice netifd: Interface 'lan' is now up
Jan  1 00:00:14 OpenWrt daemon.notice netifd: Interface 'loopback' is now up
Jan  1 00:00:14 OpenWrt kern.info kernel: [   14.400000] device eth1 entered promiscuous mode
Jan  1 00:00:14 OpenWrt daemon.notice netifd: wan (658): udhcpc (v1.19.4) started
Jan  1 00:00:14 OpenWrt daemon.notice netifd: wan (658): Sending discover...
Jan  1 00:00:14 OpenWrt user.info sysinit: 'radio0' is disabled
Jan  1 00:00:15 OpenWrt kern.info kernel: [   15.000000] eth1: link up (1000Mbps/Full duplex)
Jan  1 00:00:15 OpenWrt kern.info kernel: [   15.000000] br-lan: port 1(eth1) entered forwarding state
Jan  1 00:00:15 OpenWrt kern.info kernel: [   15.000000] br-lan: port 1(eth1) entered forwarding state
Jan  1 00:00:15 OpenWrt user.info sysinit: 'radio0' is disabled
Jan  1 00:00:15 OpenWrt user.info sysinit: 'radio0' is disabled
Jan  1 00:00:17 OpenWrt kern.info kernel: [   17.000000] br-lan: port 1(eth1) entered forwarding state
Jan  1 00:00:17 OpenWrt user.info sysinit: Loading defaults
Jan  1 00:00:17 OpenWrt user.info sysinit: Loading synflood protection
Jan  1 00:00:17 OpenWrt user.info sysinit: Adding custom chains
Jan  1 00:00:17 OpenWrt user.info sysinit: Loading zones
Jan  1 00:00:17 OpenWrt daemon.notice netifd: wan (658): Sending discover...
Jan  1 00:00:18 OpenWrt user.info sysinit: Loading forwardings
Jan  1 00:00:18 OpenWrt user.info sysinit: Loading rules
Jan  1 00:00:18 OpenWrt user.info sysinit: Loading redirects
Jan  1 00:00:18 OpenWrt user.info sysinit: Loading includes
Jan  1 00:00:18 OpenWrt user.info sysinit: Optimizing conntrack
Jan  1 00:00:18 OpenWrt user.info sysinit: Loading interfaces
Jan  1 00:00:18 OpenWrt user.info firewall: adding lan (br-lan) to zone lan
Jan  1 00:00:19 OpenWrt authpriv.info dropbear[961]: Not backgrounding
Jan  1 00:00:20 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Jan  1 00:00:20 OpenWrt user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Jan  1 00:00:20 OpenWrt daemon.notice netifd: wan (658): Sending discover...
Jan  1 00:00:23 OpenWrt daemon.info dnsmasq[1007]: started, version 2.62 cachesize 150
Jan  1 00:00:23 OpenWrt daemon.info dnsmasq[1007]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Jan  1 00:00:23 OpenWrt daemon.info dnsmasq-dhcp[1007]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Jan  1 00:00:23 OpenWrt daemon.info dnsmasq[1007]: using local addresses only for domain lan
Jan  1 00:00:23 OpenWrt daemon.warn dnsmasq[1007]: no servers found in /tmp/resolv.conf.auto, will retry
Jan  1 00:00:23 OpenWrt daemon.info dnsmasq[1007]: read /etc/hosts - 1 addresses
Jan  1 00:00:23 OpenWrt daemon.info dnsmasq-dhcp[1007]: read /etc/ethers - 0 addresses
Jan  1 00:00:23 OpenWrt user.info sysinit: setting up led WAN
Jan  1 00:00:23 OpenWrt user.info sysinit: setting up led LAN1
Jan  1 00:00:23 OpenWrt user.info sysinit: setting up led LAN2
Jan  1 00:00:23 OpenWrt user.info sysinit: setting up led LAN3
Jan  1 00:00:23 OpenWrt user.info sysinit: setting up led LAN4
Jan  1 00:00:23 OpenWrt user.info sysinit: setting up led WLAN
Jan  1 00:00:28 OpenWrt daemon.info dnsmasq-dhcp[1007]: DHCPREQUEST(br-lan) 192.168.1.206 00:e0:0c:77:4f:5a 
Jan  1 00:00:28 OpenWrt daemon.info dnsmasq-dhcp[1007]: DHCPACK(br-lan) 192.168.1.206 00:e0:0c:77:4f:5a Baofeng-PC
Jan  1 00:00:33 OpenWrt daemon.info dnsmasq-dhcp[1007]: DHCPINFORM(br-lan) 192.168.1.206 00:e0:0c:77:4f:5a 
Jan  1 00:00:33 OpenWrt daemon.info dnsmasq-dhcp[1007]: DHCPACK(br-lan) 192.168.1.206 00:e0:0c:77:4f:5a Baofeng-PC
root@OpenWrt:/# exit

(Last edited by xopal on 2 Jan 2013, 08:44)

May it be, that the kernel expects a serial port called ttyATH0, but ttyS0 is created? I see the following in your logs:

xopal wrote:
[    0.000000] Kernel command line:  board=TL-WR841N-v8 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
xopal wrote:
[    0.610000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
‚r²š‚‚‚‚êserial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A

MBS  thank you for your clue

MBS wrote:

May it be, that the kernel expects a serial port called ttyATH0, but ttyS0 is created? I see the following in your logs:

xopal wrote:
[    0.000000] Kernel command line:  board=TL-WR841N-v8 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
xopal wrote:
[    0.610000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
‚r²š‚‚‚‚êserial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A


xopal wrote:
cindy.wijaya wrote:
+$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3420V2,tl-mr3420-v2,TL-WR841N-v8,ttyATH0,115200,0x34200002,1,4Mlzma))

bagaimana kl diganti dg ini:

+$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3420V2,tl-mr3420-v2,TL-WR841N-v8,ttyS0,115200,0x34200002,1,4Mlzma))

It seems my serial connection works ok now !!! :

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.01.03 11:47:24 =~=~=~=~=~=~=~=~=~=~=~=
reboot
root@OpenWrt:/# [   99.900000] br-lan: port 2(wlan0) entered disabled state
[   99.910000] br-lan: port 1(eth1) entered disabled state
[   99.920000] device eth1 left promiscuous mode
[   99.920000] br-lan: port 1(eth1) entered disabled state
[   99.940000] eth1: link down
[   99.940000] device wlan0 left promiscuous mode
[   99.940000] br-lan: port 2(wlan0) entered disabled state
[  103.420000] Removing MTD device #3 (rootfs_data) with use count 1
[  103.440000] Restarting system.


U-Boot 1.1.4 (Jul  3 2012 - 15:12:08)

U-boot AP123


DRAM:  32 MB
id read 0x100000ff
Flash:  4 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag934x_enet_initialize...
wasp reset mask:c03300
WASP ----> S27 PHY
GMAC: cfg1 0x5 cfg2 0x7114
eth0: ba:be:fa:ce:08:41
s27 reg init 
athrs27_phy_setup ATHR_PHY_CONTROL 4: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4: 0x10
eth0 up
WASP ----> S27 PHY
GMAC: cfg1 0xf cfg2 0x7214
eth1: ba:be:fa:ce:08:41
s27 reg init lan 
ATHRS27: resetting s27
ATHRS27: s27 reset done
athrs27_phy_setup ATHR_PHY_CONTROL 0: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 1: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 2: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 3: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3: 0x10
eth1 up
eth0, eth1
Autobooting in 1 seconds
## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 3.6.11 (xopal@debian) (gcc version 4.6.4 20121106 (prerelease) (Linaro GCC 4.6-2012.11) ) #1 Thu Jan 3 11:33:13 WIT 2013
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001974c (MIPS 74Kc)
[    0.000000] SoC: Atheros AR9341 rev 1
[    0.000000] Clocks: CPU:535.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=TL-WR841N-v8 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 29132k/32768k available (2105k kernel code, 3636k reserved, 396k data, 212k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.090000] MIPS: machine is TP-LINK TL-WR841N/ND v8
[    0.510000] bio: create slab <bio-0> at 0
[    0.520000] Switching to clocksource MIPS
[    0.520000] NET: Registered protocol family 2
[    0.530000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.530000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.540000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.540000] TCP: reno registered
[    0.550000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.550000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.560000] NET: Registered protocol family 1
[    0.580000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.580000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.590000] msgmni has been set to 56
[    0.600000] io scheduler noop registered
[    0.600000] io scheduler deadline registered (default)
[    0.610000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.630000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[    0.640000] console [ttyS0] enabled, bootconsole disabled
[    0.640000] console [ttyS0] enabled, bootconsole disabled
[    0.650000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.660000] m25p80 spi0.0: found s25sl032a, expected m25p80
[    0.670000] m25p80 spi0.0: s25sl032a (4096 Kbytes)
[    0.670000] 5 tp-link partitions found on MTD device spi0.0
[    0.680000] Creating 5 MTD partitions on "spi0.0":
[    0.680000] 0x000000000000-0x000000020000 : "u-boot"
[    0.690000] 0x000000020000-0x0000000fbda0 : "kernel"
[    0.700000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.710000] 0x0000000fbda0-0x0000003f0000 : "rootfs"
[    0.720000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.730000] mtd: partition "rootfs" set to be root filesystem
[    0.740000] mtd: partition "rootfs_data" created automatically, ofs=320000, len=D0000 
[    0.740000] 0x000000320000-0x0000003f0000 : "rootfs_data"
[    0.750000] 0x0000003f0000-0x000000400000 : "art"
[    0.760000] 0x000000020000-0x0000003f0000 : "firmware"
[    0.790000] libphy: ag71xx_mdio: probed
[    0.790000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.350000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
[    1.360000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    1.920000] eth1: Found an AR934X built-in switch
[    2.950000] TCP: cubic registered
[    2.950000] NET: Registered protocol family 17
[    2.950000] 8021q: 802.1Q VLAN Support v1.8
[    2.970000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    2.970000] Freeing unused kernel memory: 212k freed
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
[    8.250000] jffs2: notice: (424) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 17 of xref (0 dead, 4 orphan) found.
switching to jffs2
- init -

Please press Enter to activate this console. [   10.030000] Compat-drivers backport release: compat-drivers-2012-12-04
[   10.040000] Backport based on wireless-testing.git master-2012-12-06
[   10.050000] compat.git: wireless-testing.git
[   10.100000] cfg80211: Calling CRDA to update world regulatory domain
[   10.100000] cfg80211: World regulatory domain updated:
[   10.110000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.120000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.120000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.130000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.140000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.150000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.360000] usbcore: registered new interface driver usbfs
[   10.370000] usbcore: registered new interface driver hub
[   10.390000] usbcore: registered new device driver usb
[   10.890000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
[   10.890000] cfg80211: Calling CRDA for country: US
[   10.900000] cfg80211: Regulatory domain changed to country: US
[   10.910000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.910000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   10.920000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   10.930000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.940000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.950000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.950000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   11.010000] PPP generic driver version 2.4.2
[   11.140000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.290000] NET: Registered protocol family 24
[   11.310000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   11.310000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[   11.320000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[   11.360000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[   11.380000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[   11.380000] hub 1-0:1.0: USB hub found
[   11.390000] hub 1-0:1.0: 1 port detected
[   11.410000] nf_conntrack version 0.5.0 (458 buckets, 1832 max)
[   11.700000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   11.720000] uhci_hcd: USB Universal Host Controller Interface driver
[   11.830000] usbcore: registered new interface driver usbserial
[   11.830000] usbcore: registered new interface driver usbserial_generic
[   11.840000] USB Serial support registered for generic
[   11.850000] usbserial: USB Serial Driver core
[   11.880000] usbcore: registered new interface driver option
[   11.880000] USB Serial support registered for GSM modem (1-port)
[   11.900000] usbcore: registered new interface driver qcserial
[   11.910000] USB Serial support registered for Qualcomm USB modem
[   11.930000] usbcore: registered new interface driver sierra
[   11.930000] USB Serial support registered for Sierra USB modem
[   16.750000] device eth1 entered promiscuous mode
[   17.490000] eth1: link up (1000Mbps/Full duplex)
[   17.490000] br-lan: port 1(eth1) entered forwarding state
[   17.500000] br-lan: port 1(eth1) entered forwarding state
[   19.500000] br-lan: port 1(eth1) entered forwarding state
[   19.520000] device wlan0 entered promiscuous mode
[   19.600000] br-lan: port 2(wlan0) entered forwarding state
[   19.610000] br-lan: port 2(wlan0) entered forwarding state
[   21.610000] br-lan: port 2(wlan0) entered forwarding state



BusyBox v1.19.4 (2013-01-03 11:06:02 WIT) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r34996)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/# cat /proc/cpuinfo
system type        : Atheros AR9341 rev 1
machine            : TP-LINK TL-WR841N/ND v8
processor        : 0
cpu model        : MIPS 74Kc V4.12
BogoMIPS        : 266.64
wait instruction    : yes
microsecond timers    : yes
tlb_entries        : 32
extra interrupt vector    : yes
hardware watchpoint    : yes, count: 4, address/irw mask: [0x0000, 0x0ff8, 0x0ff8, 0x0ff8]
ASEs implemented    : mips16 dsp
shadow register sets    : 1
kscratch registers    : 0
core            : 0
VCED exceptions        : not available
VCEI exceptions        : not available

root@OpenWrt:/# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@OpenWrt:/# 

Resume of this router can be found here http://forum.openwrt-id.org/viewtopic.php?pid=73#p73 , if you like you can submit to Dev. OpenWrt  since I don't know how to submit patches to Dev. OpenWrt.

(Last edited by xopal on 3 Jan 2013, 10:46)

Can not enable USB function

Index: target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
===================================================================
--- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c    (revision 35015)
+++ target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c    (working copy)
@@ -18,6 +18,7 @@
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "dev-m25p80.h"
+#include "dev-usb.h"
 #include "dev-wmac.h"
 #include "machtypes.h"
 
@@ -110,6 +111,7 @@
     ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
                     ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
                     tl_wr841n_v8_gpio_keys);
+    ath79_register_usb();
 
     ath79_register_m25p80(&tl_wr841n_v8_flash_data);
 
Index: target/linux/ar71xx/image/Makefile
===================================================================
--- target/linux/ar71xx/image/Makefile    (revision 35015)
+++ target/linux/ar71xx/image/Makefile    (working copy)
@@ -883,7 +883,7 @@
 $(eval $(call SingleProfile,TPLINKOLD,$(fs_squash),TLWR841NV15,tl-wr841nd-v1.5,TL-WR841N-v1.5,ttyS0,115200,0x08410002,2,4M))
 
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3220V1,tl-mr3220-v1,TL-MR3220,ttyS0,115200,0x32200001,1,4M))
-$(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3420,tl-mr3420-v1,TL-MR3420,ttyS0,115200,0x34200001,1,4M))
+$(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3420V1,tl-mr3420-v1,TL-MR3420,ttyS0,115200,0x34200001,1,4M))
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWA701,tl-wa701n-v1,TL-WA901ND,ttyS0,115200,0x07010001,1,4M))
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWA7510NV1,tl-wa7510n,TL-WA7510N,ttyS0,115200,0x75100001,1,4M))
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWA801NV1,tl-wa801nd-v1,TL-WA901ND,ttyS0,115200,0x08010001,1,4M))
@@ -907,6 +907,7 @@
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3020,tl-mr3020-v1,TL-MR3020,ttyATH0,115200,0x30200001,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3040,tl-mr3040-v1,TL-MR3040,ttyATH0,115200,0x30400001,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3220V2,tl-mr3220-v2,TL-MR3220-v2,ttyATH0,115200,0x32200002,1,4Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3420V2,tl-mr3420-v2,TL-WR841N-v8,ttyS0,115200,0x34200002,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR703,tl-wr703n-v1,TL-WR703N,ttyATH0,115200,0x07030101,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR740NV4,tl-wr740n-v4,TL-WR741ND-v4,ttyATH0,115200,0x07400004,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR741NV4,tl-wr741nd-v4,TL-WR741ND-v4,ttyATH0,115200,0x07410004,1,4Mlzma))
@@ -956,6 +957,7 @@
 $(eval $(call MultiProfile,OPENMESH,OM2P MR600))
 $(eval $(call MultiProfile,TEW652BRP,TEW652BRP_FW TEW652BRP_RECOVERY))
 $(eval $(call MultiProfile,TLMR3220,TLMR3220V1 TLMR3220V2))
+$(eval $(call MultiProfile,TLMR3420,TLMR3420V1 TLMR3420V2))
 $(eval $(call MultiProfile,TLWA801,TLWA801NV1))
 $(eval $(call MultiProfile,TLWA901,TLWA901NV1 TLWA901NV2))
 $(eval $(call MultiProfile,TLWA7510,TLWA7510NV1))
Index: target/linux/ar71xx/base-files/lib/ar71xx.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/ar71xx.sh    (revision 35015)
+++ target/linux/ar71xx/base-files/lib/ar71xx.sh    (working copy)
@@ -357,6 +357,9 @@
     *TL-MR3420)
         name="tl-mr3420"
         ;;
+    *"TL-MR3420 v2")
+        name="tl-mr3420-v2"
+        ;;
     *TL-WA7510N)
         name="tl-wa7510n"
         ;;
Index: target/linux/ar71xx/base-files/lib/upgrade/platform.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/upgrade/platform.sh    (revision 35015)
+++ target/linux/ar71xx/base-files/lib/upgrade/platform.sh    (working copy)
@@ -155,6 +155,7 @@
     tl-mr3220 | \
     tl-mr3220-v2 | \
     tl-mr3420 | \
+    tl-mr3420-v2 | \
     tl-wa7510n | \
     tl-wa901nd | \
     tl-wa901nd-v2 | \
Index: target/linux/ar71xx/base-files/etc/uci-defaults/leds
===================================================================
--- target/linux/ar71xx/base-files/etc/uci-defaults/leds    (revision 35015)
+++ target/linux/ar71xx/base-files/etc/uci-defaults/leds    (working copy)
@@ -128,6 +128,16 @@
     ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
     ;;
 
+tl-mr3420-v2)
+    ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
+    ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
+    ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+    ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
+    ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+    ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+    ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
+    ;;
+
 tl-wa901nd)
     ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
     ;;
Index: target/linux/ar71xx/base-files/etc/uci-defaults/network
===================================================================
--- target/linux/ar71xx/base-files/etc/uci-defaults/network    (revision 35015)
+++ target/linux/ar71xx/base-files/etc/uci-defaults/network    (working copy)
@@ -217,6 +217,7 @@
 tl-mr3220 |\
 tl-mr3220-v2 |\
 tl-mr3420 |\
+tl-mr3420-v2 |\
 tl-wr741nd |\
 tl-wr741nd-v4 |\
 tl-wr841n-v7 |\
Index: target/linux/ar71xx/base-files/etc/diag.sh
===================================================================
--- target/linux/ar71xx/base-files/etc/diag.sh    (revision 35015)
+++ target/linux/ar71xx/base-files/etc/diag.sh    (working copy)
@@ -132,6 +132,7 @@
     tl-mr3220 | \
     tl-mr3220-v2 | \
     tl-mr3420 | \
+    tl-mr3420-v2 | \
     tl-wa901nd | \
     tl-wa901nd-v2 | \
     tl-wr1041n-v2 | \
Index: target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch
===================================================================
--- target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch    (revision 35015)
+++ target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch    (working copy)
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,112 @@
+@@ -16,22 +16,113 @@
  
  enum ath79_mach_type {
      ATH79_MACH_GENERIC = 0,
@@ -67,6 +67,7 @@
 +    ATH79_MACH_TL_MR3220,        /* TP-LINK TL-MR3220 */
 +    ATH79_MACH_TL_MR3220_V2,    /* TP-LINK TL-MR3220 v2 */
 +    ATH79_MACH_TL_MR3420,        /* TP-LINK TL-MR3420 */
++    ATH79_MACH_TL_MR3420_V2,    /* TP-LINK TL-MR3420 v2 */
 +    ATH79_MACH_TL_WA7510N_V1,    /* TP-LINK TL-WA7510N v1*/
 +    ATH79_MACH_TL_WA901ND,        /* TP-LINK TL-WA901ND */
 +    ATH79_MACH_TL_WA901ND_V2,    /* TP-LINK TL-WA901ND v2 */
Index: tools/firmware-utils/src/mktplinkfw.c
===================================================================
--- tools/firmware-utils/src/mktplinkfw.c    (revision 35015)
+++ tools/firmware-utils/src/mktplinkfw.c    (working copy)
@@ -34,6 +34,7 @@
 #define HWID_TL_MR3220_V1    0x32200001
 #define HWID_TL_MR3220_V2    0x32200002
 #define HWID_TL_MR3420_V1    0x34200001
+#define HWID_TL_MR3420_V2    0x34200002
 #define HWID_TL_WA701N_V1    0x07010001
 #define HWID_TL_WA7510N_V1    0x75100001
 #define HWID_TL_WA801ND_V1    0x08010001
@@ -175,8 +176,7 @@
         .kernel_ep    = 0x80060000,
         .rootfs_ofs    = 0x100000,
     }, {
-        /* terminating entry */
-    }
+        }
 };
 
 static struct board_info boards[] = {
@@ -201,6 +201,11 @@
         .hw_rev        = 1,
         .layout_id    = "4M",
     }, {
+        .id        = "TL-MR3420v2",
+        .hw_id        = HWID_TL_MR3420_V2,
+        .hw_rev        = 1,
+        .layout_id    = "4Mlzma",
+    }, {
         .id        = "TL-WA701Nv1",
         .hw_id        = HWID_TL_WA701N_V1,
         .hw_rev        = 1,

Pastebin

(Last edited by xopal on 5 Jan 2013, 14:59)

xopal wrote:

Can not enable USB function
[spoiler]

Index: target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
===================================================================
--- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c    (revision 35015)
+++ target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c    (working copy)
@@ -18,6 +18,7 @@
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "dev-m25p80.h"
+#include "dev-usb.h"
 #include "dev-wmac.h"
 #include "machtypes.h"
 
@@ -110,6 +111,7 @@
     ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
                     ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
                     tl_wr841n_v8_gpio_keys);
+    ath79_register_usb();
 
     ath79_register_m25p80(&tl_wr841n_v8_flash_data);
 
Index: target/linux/ar71xx/image/Makefile
===================================================================
--- target/linux/ar71xx/image/Makefile    (revision 35015)
+++ target/linux/ar71xx/image/Makefile    (working copy)
@@ -883,7 +883,7 @@
 $(eval $(call SingleProfile,TPLINKOLD,$(fs_squash),TLWR841NV15,tl-wr841nd-v1.5,TL-WR841N-v1.5,ttyS0,115200,0x08410002,2,4M))
 
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3220V1,tl-mr3220-v1,TL-MR3220,ttyS0,115200,0x32200001,1,4M))
-$(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3420,tl-mr3420-v1,TL-MR3420,ttyS0,115200,0x34200001,1,4M))
+$(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3420V1,tl-mr3420-v1,TL-MR3420,ttyS0,115200,0x34200001,1,4M))
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWA701,tl-wa701n-v1,TL-WA901ND,ttyS0,115200,0x07010001,1,4M))
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWA7510NV1,tl-wa7510n,TL-WA7510N,ttyS0,115200,0x75100001,1,4M))
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWA801NV1,tl-wa801nd-v1,TL-WA901ND,ttyS0,115200,0x08010001,1,4M))
@@ -907,6 +907,7 @@
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3020,tl-mr3020-v1,TL-MR3020,ttyATH0,115200,0x30200001,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3040,tl-mr3040-v1,TL-MR3040,ttyATH0,115200,0x30400001,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3220V2,tl-mr3220-v2,TL-MR3220-v2,ttyATH0,115200,0x32200002,1,4Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3420V2,tl-mr3420-v2,TL-WR841N-v8,ttyS0,115200,0x34200002,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR703,tl-wr703n-v1,TL-WR703N,ttyATH0,115200,0x07030101,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR740NV4,tl-wr740n-v4,TL-WR741ND-v4,ttyATH0,115200,0x07400004,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR741NV4,tl-wr741nd-v4,TL-WR741ND-v4,ttyATH0,115200,0x07410004,1,4Mlzma))
@@ -956,6 +957,7 @@
 $(eval $(call MultiProfile,OPENMESH,OM2P MR600))
 $(eval $(call MultiProfile,TEW652BRP,TEW652BRP_FW TEW652BRP_RECOVERY))
 $(eval $(call MultiProfile,TLMR3220,TLMR3220V1 TLMR3220V2))
+$(eval $(call MultiProfile,TLMR3420,TLMR3420V1 TLMR3420V2))
 $(eval $(call MultiProfile,TLWA801,TLWA801NV1))
 $(eval $(call MultiProfile,TLWA901,TLWA901NV1 TLWA901NV2))
 $(eval $(call MultiProfile,TLWA7510,TLWA7510NV1))
Index: target/linux/ar71xx/base-files/lib/ar71xx.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/ar71xx.sh    (revision 35015)
+++ target/linux/ar71xx/base-files/lib/ar71xx.sh    (working copy)
@@ -357,6 +357,9 @@
     *TL-MR3420)
         name="tl-mr3420"
         ;;
+    *"TL-MR3420 v2")
+        name="tl-mr3420-v2"
+        ;;
     *TL-WA7510N)
         name="tl-wa7510n"
         ;;
Index: target/linux/ar71xx/base-files/lib/upgrade/platform.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/upgrade/platform.sh    (revision 35015)
+++ target/linux/ar71xx/base-files/lib/upgrade/platform.sh    (working copy)
@@ -155,6 +155,7 @@
     tl-mr3220 | \
     tl-mr3220-v2 | \
     tl-mr3420 | \
+    tl-mr3420-v2 | \
     tl-wa7510n | \
     tl-wa901nd | \
     tl-wa901nd-v2 | \
Index: target/linux/ar71xx/base-files/etc/uci-defaults/leds
===================================================================
--- target/linux/ar71xx/base-files/etc/uci-defaults/leds    (revision 35015)
+++ target/linux/ar71xx/base-files/etc/uci-defaults/leds    (working copy)
@@ -128,6 +128,16 @@
     ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
     ;;
 
+tl-mr3420-v2)
+    ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
+    ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
+    ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+    ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
+    ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+    ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+    ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
+    ;;
+
 tl-wa901nd)
     ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
     ;;
Index: target/linux/ar71xx/base-files/etc/uci-defaults/network
===================================================================
--- target/linux/ar71xx/base-files/etc/uci-defaults/network    (revision 35015)
+++ target/linux/ar71xx/base-files/etc/uci-defaults/network    (working copy)
@@ -217,6 +217,7 @@
 tl-mr3220 |\
 tl-mr3220-v2 |\
 tl-mr3420 |\
+tl-mr3420-v2 |\
 tl-wr741nd |\
 tl-wr741nd-v4 |\
 tl-wr841n-v7 |\
Index: target/linux/ar71xx/base-files/etc/diag.sh
===================================================================
--- target/linux/ar71xx/base-files/etc/diag.sh    (revision 35015)
+++ target/linux/ar71xx/base-files/etc/diag.sh    (working copy)
@@ -132,6 +132,7 @@
     tl-mr3220 | \
     tl-mr3220-v2 | \
     tl-mr3420 | \
+    tl-mr3420-v2 | \
     tl-wa901nd | \
     tl-wa901nd-v2 | \
     tl-wr1041n-v2 | \
Index: target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch
===================================================================
--- target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch    (revision 35015)
+++ target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch    (working copy)
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,112 @@
+@@ -16,22 +16,113 @@
  
  enum ath79_mach_type {
      ATH79_MACH_GENERIC = 0,
@@ -67,6 +67,7 @@
 +    ATH79_MACH_TL_MR3220,        /* TP-LINK TL-MR3220 */
 +    ATH79_MACH_TL_MR3220_V2,    /* TP-LINK TL-MR3220 v2 */
 +    ATH79_MACH_TL_MR3420,        /* TP-LINK TL-MR3420 */
++    ATH79_MACH_TL_MR3420_V2,    /* TP-LINK TL-MR3420 v2 */
 +    ATH79_MACH_TL_WA7510N_V1,    /* TP-LINK TL-WA7510N v1*/
 +    ATH79_MACH_TL_WA901ND,        /* TP-LINK TL-WA901ND */
 +    ATH79_MACH_TL_WA901ND_V2,    /* TP-LINK TL-WA901ND v2 */
Index: tools/firmware-utils/src/mktplinkfw.c
===================================================================
--- tools/firmware-utils/src/mktplinkfw.c    (revision 35015)
+++ tools/firmware-utils/src/mktplinkfw.c    (working copy)
@@ -34,6 +34,7 @@
 #define HWID_TL_MR3220_V1    0x32200001
 #define HWID_TL_MR3220_V2    0x32200002
 #define HWID_TL_MR3420_V1    0x34200001
+#define HWID_TL_MR3420_V2    0x34200002
 #define HWID_TL_WA701N_V1    0x07010001
 #define HWID_TL_WA7510N_V1    0x75100001
 #define HWID_TL_WA801ND_V1    0x08010001
@@ -175,8 +176,7 @@
         .kernel_ep    = 0x80060000,
         .rootfs_ofs    = 0x100000,
     }, {
-        /* terminating entry */
-    }
+        }
 };
 
 static struct board_info boards[] = {
@@ -201,6 +201,11 @@
         .hw_rev        = 1,
         .layout_id    = "4M",
     }, {
+        .id        = "TL-MR3420v2",
+        .hw_id        = HWID_TL_MR3420_V2,
+        .hw_rev        = 1,
+        .layout_id    = "4Mlzma",
+    }, {
         .id        = "TL-WA701Nv1",
         .hw_id        = HWID_TL_WA701N_V1,
         .hw_rev        = 1,

[/spoiler]

Pastebin

Actually USB is enable but does not power up big_smile

Update:
SOLVED - DONE!

(Last edited by cindy.wijaya on 10 Jan 2013, 11:09)

Adding support to TP-LINK MR3220 V.2 + MR3420 V.2
OpenWrt Attitude Adjustment 12.09-rc1

diff

Index: target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
===================================================================
--- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c    (revision 35052)
+++ target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c    (working copy)
@@ -8,6 +8,9 @@
  *  by the Free Software Foundation.
  */
 
+#include "dev-usb.h" 
+#include <linux/gpio.h>
+
 #include <linux/platform_device.h>
 
 #include <asm/mach-ath79/ath79.h>
@@ -32,7 +35,7 @@
 
 #define TL_WR841NV8_GPIO_BTN_RESET    17
 #define TL_WR841NV8_GPIO_SW_RFKILL    16
-
+#define TL_WR841NV8_GPIO_USB_POWER    4
 #define TL_WR841NV8_KEYS_POLL_INTERVAL    20    /* msecs */
 #define TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR841NV8_KEYS_POLL_INTERVAL)
 
@@ -111,6 +114,13 @@
                     ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
                     tl_wr841n_v8_gpio_keys);
 
+    /* enable power for the USB port */
+    gpio_request(TL_WR841NV8_GPIO_USB_POWER, "USB power");
+    gpio_direction_input(TL_WR841NV8_GPIO_USB_POWER);
+
+    ath79_register_usb();
+    /* END for the USB port */
+
     ath79_register_m25p80(&tl_wr841n_v8_flash_data);
 
     ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
@@ -135,5 +145,5 @@
     ath79_register_wmac(ee, mac);
 }
 
-MIPS_MACHINE(ATH79_MACH_TL_WR841N_V8, "TL-WR841N-v8", "TP-LINK TL-WR841N/ND v8",
+MIPS_MACHINE(ATH79_MACH_TL_WR841N_V8, "TL-WR841N-v8", "TP-LINK TL-MR3420 v2 | TP-LINK TL-WR841N/ND v8 (3G)",
          tl_wr841n_v8_setup);
Index: target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c
===================================================================
--- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c    (revision 35052)
+++ target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c    (working copy)
@@ -13,6 +13,7 @@
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
 
+#include "dev-usb.h"
 #include "common.h"
 #include "dev-eth.h"
 #include "dev-gpio-buttons.h"
@@ -120,6 +121,7 @@
                     ARRAY_SIZE(tl_wr741ndv4_gpio_keys),
                     tl_wr741ndv4_gpio_keys);
 
+    ath79_register_usb();
     ath79_register_m25p80(&tl_wr741ndv4_flash_data);
     ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
     ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
@@ -132,4 +134,4 @@
 }
 
 MIPS_MACHINE(ATH79_MACH_TL_WR741ND_V4, "TL-WR741ND-v4",
-         "TP-LINK TL-WR741ND v4", tl_wr741ndv4_setup);
+         "TP-LINK TL-MR3220 v2 | TP-LINK TL-WR741ND v4 (3G)", tl_wr741ndv4_setup);
Index: target/linux/ar71xx/image/Makefile
===================================================================
--- target/linux/ar71xx/image/Makefile    (revision 35052)
+++ target/linux/ar71xx/image/Makefile    (working copy)
@@ -848,8 +848,7 @@
 
 $(eval $(call SingleProfile,TPLINKOLD,$(fs_squash),TLWR841NV15,tl-wr841nd-v1.5,TL-WR841N-v1.5,ttyS0,115200,0x08410002,2,4M))
 
-$(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3220,tl-mr3220-v1,TL-MR3220,ttyS0,115200,0x32200001,1,4M))
-$(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3420,tl-mr3420-v1,TL-MR3420,ttyS0,115200,0x34200001,1,4M))
+
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWA701,tl-wa701n-v1,TL-WA901ND,ttyS0,115200,0x07010001,1,4M))
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWA7510NV1,tl-wa7510n,TL-WA7510N,ttyS0,115200,0x75100001,1,4M))
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWA901NV1,tl-wa901nd-v1,TL-WA901ND,ttyS0,115200,0x09010001,1,4M))
@@ -869,11 +868,12 @@
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWR1043,tl-wr1043nd-v1,TL-WR1043ND,ttyS0,115200,0x10430001,1,8M))
 
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR11U,tl-mr11u-v1,TL-MR11U,ttyATH0,115200,0x00110101,1,4Mlzma))
-$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3020,tl-mr3020-v1,TL-MR3020,ttyATH0,115200,0x30200001,1,4Mlzma))
-$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3040,tl-mr3040-v1,TL-MR3040,ttyATH0,115200,0x30400001,1,4Mlzma))
+
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR703,tl-wr703n-v1,TL-WR703N,ttyATH0,115200,0x07030101,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR740NV4,tl-wr740n-v4,TL-WR741ND-v4,ttyATH0,115200,0x07400004,1,4Mlzma))
+########### referensi mr3220 v.2
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR741NV4,tl-wr741nd-v4,TL-WR741ND-v4,ttyATH0,115200,0x07410004,1,4Mlzma))
+########### 
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR841NV8,tl-wr841n-v8,TL-WR841N-v8,ttyS0,115200,0x08410008,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR1041,tl-wr1041n-v2,TL-WR1041N-v2,ttyS0,115200,0x10410002,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR2543,tl-wr2543-v1,TL-WR2543N,ttyS0,115200,0x25430001,1,8Mlzma,-v 3.13.99))
@@ -912,6 +912,19 @@
 
 $(eval $(call SingleProfile,ZyXEL,$(fs_64k),NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
 
+$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3020V1,tl-mr3020-v1,TL-MR3020,ttyATH0,115200,0x30200001,1,4Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3040V1,tl-mr3040-v1,TL-MR3040,ttyATH0,115200,0x30400001,1,4Mlzma))
+$(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3220V1,tl-mr3220-v1,TL-MR3220,ttyS0,115200,0x32200001,1,4M))
+$(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3420V1,tl-mr3420-v1,TL-MR3420,ttyS0,115200,0x34200001,1,4M))
+############ MR3220 V.2
+$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3220V2,tl-mr3220-v2,TL-WR741ND-v4,ttyATH0,115200,0x32200002,1,4Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3420V2,tl-mr3420-v2,TL-WR841N-v8,ttyS0,115200,0x34200002,1,4Mlzma))
+############ 
+#----------------------tambahan
+$(eval $(call MultiProfile,TLMR3220,TLMR3220V1 TLMR3220V2))
+$(eval $(call MultiProfile,TLMR3420,TLMR3420V1 TLMR3420V2))
+$(eval $(call MultiProfile,TLMR3020,TLMR3020V1 TLMR3020V2))
+#----------------------
 $(eval $(call MultiProfile,AP121,AP121_2M AP121_4M))
 $(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT))
 $(eval $(call MultiProfile,TEW652BRP,TEW652BRP_FW TEW652BRP_RECOVERY))
Index: target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch
===================================================================
--- target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch    (revision 35052)
+++ target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch    (working copy)
@@ -555,6 +555,7 @@
 +config ATH79_MACH_TL_WR741ND_V4
 +    bool "TP-LINK TL-WR741ND v4 support"
 +    select SOC_AR933X
++    select ATH79_DEV_USB
 +    select ATH79_DEV_ETH
 +    select ATH79_DEV_GPIO_BUTTONS
 +    select ATH79_DEV_LEDS_GPIO
@@ -573,6 +574,7 @@
 +config ATH79_MACH_TL_WR841N_V8
 +    bool "TP-LINK TL-WR841N/ND v8 support"
 +    select SOC_AR934X
++    select ATH79_DEV_USB
 +    select ATH79_DEV_ETH
 +    select ATH79_DEV_GPIO_BUTTONS
 +    select ATH79_DEV_LEDS_GPIO
Index: target/linux/ar71xx/base-files/etc/uci-defaults/network
===================================================================
--- target/linux/ar71xx/base-files/etc/uci-defaults/network    (revision 35052)
+++ target/linux/ar71xx/base-files/etc/uci-defaults/network    (working copy)
@@ -134,6 +134,12 @@
     ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
     ;;
 
+tl-mr3420-v2)
+    ucidef_set_interfaces_lan_wan "eth1" "eth0"
+    ucidef_add_switch "switch0" "1" "1"
+    ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
+    ;;
+
 wrt160nl)
     ucidef_set_interfaces_lan_wan "eth0" "eth1"
     ucidef_add_switch "eth0" "1" "1"
@@ -187,6 +193,7 @@
 tew-632brp |\
 tew-712br |\
 tl-mr3220 |\
+tl-mr3220-v2 |\
 tl-mr3420 |\
 tl-wr741nd |\
 tl-wr741nd-v4 |\
Index: tools/firmware-utils/src/mktplinkfw.c
===================================================================
--- tools/firmware-utils/src/mktplinkfw.c    (revision 35052)
+++ tools/firmware-utils/src/mktplinkfw.c    (working copy)
@@ -32,7 +32,9 @@
 #define HEADER_VERSION_V1    0x01000000
 #define HWID_TL_MR3020_V1    0x30200001
 #define HWID_TL_MR3220_V1    0x32200001
+#define HWID_TL_MR3220_V2    0x32200002
 #define HWID_TL_MR3420_V1    0x34200001
+#define HWID_TL_MR3420_V2    0x34200002
 #define HWID_TL_WA701N_V1    0x07010001
 #define HWID_TL_WA7510N_V1    0x75100001
 #define HWID_TL_WA901ND_V1    0x09010001
@@ -173,6 +175,12 @@
         .kernel_ep    = 0x80060000,
         .rootfs_ofs    = 0x100000,
     }, {
+        .id             = "16Mlzma",
+        .fw_max_len     = 0xfc0000,
+        .kernel_la      = 0x80060000,
+        .kernel_ep      = 0x80060000,
+        .rootfs_ofs     = 0x100000,
+    }, {
         /* terminating entry */
     }
 };
@@ -189,11 +197,21 @@
         .hw_rev        = 1,
         .layout_id    = "4M",
     }, {
+        .id        = "TL-MR3220v2",
+        .hw_id        = HWID_TL_MR3220_V2,
+        .hw_rev        = 1,
+        .layout_id    = "4Mlzma",
+    }, {
         .id        = "TL-MR3420v1",
         .hw_id        = HWID_TL_MR3420_V1,
         .hw_rev        = 1,
         .layout_id    = "4M",
     }, {
+        .id        = "TL-MR3420v2",
+        .hw_id        = HWID_TL_MR3420_V2,
+        .hw_rev        = 1,
+        .layout_id    = "4Mlzma",
+    }, {
         .id        = "TL-WA701Nv1",
         .hw_id        = HWID_TL_WA701N_V1,
         .hw_rev        = 1,

pastebin-diff

Download (iix)
http://openwrt.agromapia.com/firmware/aarc1/

Download (int)
https://www.box.com/s/qebaprwq0798dyu19h1c

folder contains:

md5sums
openwrt-ar71xx-generic-tl-mr3020-v1-squashfs-factory.bin
openwrt-ar71xx-generic-tl-mr3220-v1-squashfs-factory.bin
openwrt-ar71xx-generic-tl-mr3220-v2-squashfs-factory.bin
openwrt-ar71xx-generic-tl-mr3420-v1-squashfs-factory.bin
openwrt-ar71xx-generic-tl-mr3420-v2-squashfs-factory.bin

Previous firmware:
https://www.box.com/s/cqk23ztqlux1zs034896[/spoiler]

Mission Accomplished

https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcRQXgOGs5oW9_YFoQvf-f9OqZg6Lt_N0V17VpbNGeQyiFfZ2o7U

(Last edited by cindy.wijaya on 10 Jan 2013, 10:18)

cindy.wijaya wrote:

Adding support to TP-LINK MR3220 V.2 + MR3420 V.2
OpenWrt Attitude Adjustment 12.09-rc1

diff

Index: target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
===================================================================
--- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c    (revision 35052)
+++ target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c    (working copy)
@@ -8,6 +8,9 @@
  *  by the Free Software Foundation.
  */
 
+#include "dev-usb.h" 
+#include <linux/gpio.h>
+
 #include <linux/platform_device.h>
 
 #include <asm/mach-ath79/ath79.h>
@@ -32,7 +35,7 @@
 
 #define TL_WR841NV8_GPIO_BTN_RESET    17
 #define TL_WR841NV8_GPIO_SW_RFKILL    16
-
+#define TL_WR841NV8_GPIO_USB_POWER    4
 #define TL_WR841NV8_KEYS_POLL_INTERVAL    20    /* msecs */
 #define TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR841NV8_KEYS_POLL_INTERVAL)
 
@@ -111,6 +114,13 @@
                     ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
                     tl_wr841n_v8_gpio_keys);
 
+    /* enable power for the USB port */
+    gpio_request(TL_WR841NV8_GPIO_USB_POWER, "USB power");
+    gpio_direction_input(TL_WR841NV8_GPIO_USB_POWER);
+
+    ath79_register_usb();
+    /* END for the USB port */
+
     ath79_register_m25p80(&tl_wr841n_v8_flash_data);
 
     ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
@@ -135,5 +145,5 @@
     ath79_register_wmac(ee, mac);
 }
 
-MIPS_MACHINE(ATH79_MACH_TL_WR841N_V8, "TL-WR841N-v8", "TP-LINK TL-WR841N/ND v8",
+MIPS_MACHINE(ATH79_MACH_TL_WR841N_V8, "TL-WR841N-v8", "TP-LINK TL-MR3420 v2 | TP-LINK TL-WR841N/ND v8 (3G)",
          tl_wr841n_v8_setup);
Index: target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c
===================================================================
--- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c    (revision 35052)
+++ target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c    (working copy)
@@ -13,6 +13,7 @@
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
 
+#include "dev-usb.h"
 #include "common.h"
 #include "dev-eth.h"
 #include "dev-gpio-buttons.h"
@@ -120,6 +121,7 @@
                     ARRAY_SIZE(tl_wr741ndv4_gpio_keys),
                     tl_wr741ndv4_gpio_keys);
 
+    ath79_register_usb();
     ath79_register_m25p80(&tl_wr741ndv4_flash_data);
     ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
     ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
@@ -132,4 +134,4 @@
 }
 
 MIPS_MACHINE(ATH79_MACH_TL_WR741ND_V4, "TL-WR741ND-v4",
-         "TP-LINK TL-WR741ND v4", tl_wr741ndv4_setup);
+         "TP-LINK TL-MR3220 v2 | TP-LINK TL-WR741ND v4 (3G)", tl_wr741ndv4_setup);
Index: target/linux/ar71xx/image/Makefile
===================================================================
--- target/linux/ar71xx/image/Makefile    (revision 35052)
+++ target/linux/ar71xx/image/Makefile    (working copy)
@@ -848,8 +848,7 @@
 
 $(eval $(call SingleProfile,TPLINKOLD,$(fs_squash),TLWR841NV15,tl-wr841nd-v1.5,TL-WR841N-v1.5,ttyS0,115200,0x08410002,2,4M))
 
-$(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3220,tl-mr3220-v1,TL-MR3220,ttyS0,115200,0x32200001,1,4M))
-$(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3420,tl-mr3420-v1,TL-MR3420,ttyS0,115200,0x34200001,1,4M))
+
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWA701,tl-wa701n-v1,TL-WA901ND,ttyS0,115200,0x07010001,1,4M))
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWA7510NV1,tl-wa7510n,TL-WA7510N,ttyS0,115200,0x75100001,1,4M))
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWA901NV1,tl-wa901nd-v1,TL-WA901ND,ttyS0,115200,0x09010001,1,4M))
@@ -869,11 +868,12 @@
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWR1043,tl-wr1043nd-v1,TL-WR1043ND,ttyS0,115200,0x10430001,1,8M))
 
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR11U,tl-mr11u-v1,TL-MR11U,ttyATH0,115200,0x00110101,1,4Mlzma))
-$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3020,tl-mr3020-v1,TL-MR3020,ttyATH0,115200,0x30200001,1,4Mlzma))
-$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3040,tl-mr3040-v1,TL-MR3040,ttyATH0,115200,0x30400001,1,4Mlzma))
+
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR703,tl-wr703n-v1,TL-WR703N,ttyATH0,115200,0x07030101,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR740NV4,tl-wr740n-v4,TL-WR741ND-v4,ttyATH0,115200,0x07400004,1,4Mlzma))
+########### referensi mr3220 v.2
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR741NV4,tl-wr741nd-v4,TL-WR741ND-v4,ttyATH0,115200,0x07410004,1,4Mlzma))
+########### 
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR841NV8,tl-wr841n-v8,TL-WR841N-v8,ttyS0,115200,0x08410008,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR1041,tl-wr1041n-v2,TL-WR1041N-v2,ttyS0,115200,0x10410002,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR2543,tl-wr2543-v1,TL-WR2543N,ttyS0,115200,0x25430001,1,8Mlzma,-v 3.13.99))
@@ -912,6 +912,19 @@
 
 $(eval $(call SingleProfile,ZyXEL,$(fs_64k),NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
 
+$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3020V1,tl-mr3020-v1,TL-MR3020,ttyATH0,115200,0x30200001,1,4Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3040V1,tl-mr3040-v1,TL-MR3040,ttyATH0,115200,0x30400001,1,4Mlzma))
+$(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3220V1,tl-mr3220-v1,TL-MR3220,ttyS0,115200,0x32200001,1,4M))
+$(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLMR3420V1,tl-mr3420-v1,TL-MR3420,ttyS0,115200,0x34200001,1,4M))
+############ MR3220 V.2
+$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3220V2,tl-mr3220-v2,TL-WR741ND-v4,ttyATH0,115200,0x32200002,1,4Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3420V2,tl-mr3420-v2,TL-WR841N-v8,ttyS0,115200,0x34200002,1,4Mlzma))
+############ 
+#----------------------tambahan
+$(eval $(call MultiProfile,TLMR3220,TLMR3220V1 TLMR3220V2))
+$(eval $(call MultiProfile,TLMR3420,TLMR3420V1 TLMR3420V2))
+$(eval $(call MultiProfile,TLMR3020,TLMR3020V1 TLMR3020V2))
+#----------------------
 $(eval $(call MultiProfile,AP121,AP121_2M AP121_4M))
 $(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT))
 $(eval $(call MultiProfile,TEW652BRP,TEW652BRP_FW TEW652BRP_RECOVERY))
Index: target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch
===================================================================
--- target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch    (revision 35052)
+++ target/linux/ar71xx/patches-3.3/610-MIPS-ath79-openwrt-machines.patch    (working copy)
@@ -555,6 +555,7 @@
 +config ATH79_MACH_TL_WR741ND_V4
 +    bool "TP-LINK TL-WR741ND v4 support"
 +    select SOC_AR933X
++    select ATH79_DEV_USB
 +    select ATH79_DEV_ETH
 +    select ATH79_DEV_GPIO_BUTTONS
 +    select ATH79_DEV_LEDS_GPIO
@@ -573,6 +574,7 @@
 +config ATH79_MACH_TL_WR841N_V8
 +    bool "TP-LINK TL-WR841N/ND v8 support"
 +    select SOC_AR934X
++    select ATH79_DEV_USB
 +    select ATH79_DEV_ETH
 +    select ATH79_DEV_GPIO_BUTTONS
 +    select ATH79_DEV_LEDS_GPIO
Index: target/linux/ar71xx/base-files/etc/uci-defaults/network
===================================================================
--- target/linux/ar71xx/base-files/etc/uci-defaults/network    (revision 35052)
+++ target/linux/ar71xx/base-files/etc/uci-defaults/network    (working copy)
@@ -134,6 +134,12 @@
     ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
     ;;
 
+tl-mr3420-v2)
+    ucidef_set_interfaces_lan_wan "eth1" "eth0"
+    ucidef_add_switch "switch0" "1" "1"
+    ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
+    ;;
+
 wrt160nl)
     ucidef_set_interfaces_lan_wan "eth0" "eth1"
     ucidef_add_switch "eth0" "1" "1"
@@ -187,6 +193,7 @@
 tew-632brp |\
 tew-712br |\
 tl-mr3220 |\
+tl-mr3220-v2 |\
 tl-mr3420 |\
 tl-wr741nd |\
 tl-wr741nd-v4 |\
Index: tools/firmware-utils/src/mktplinkfw.c
===================================================================
--- tools/firmware-utils/src/mktplinkfw.c    (revision 35052)
+++ tools/firmware-utils/src/mktplinkfw.c    (working copy)
@@ -32,7 +32,9 @@
 #define HEADER_VERSION_V1    0x01000000
 #define HWID_TL_MR3020_V1    0x30200001
 #define HWID_TL_MR3220_V1    0x32200001
+#define HWID_TL_MR3220_V2    0x32200002
 #define HWID_TL_MR3420_V1    0x34200001
+#define HWID_TL_MR3420_V2    0x34200002
 #define HWID_TL_WA701N_V1    0x07010001
 #define HWID_TL_WA7510N_V1    0x75100001
 #define HWID_TL_WA901ND_V1    0x09010001
@@ -173,6 +175,12 @@
         .kernel_ep    = 0x80060000,
         .rootfs_ofs    = 0x100000,
     }, {
+        .id             = "16Mlzma",
+        .fw_max_len     = 0xfc0000,
+        .kernel_la      = 0x80060000,
+        .kernel_ep      = 0x80060000,
+        .rootfs_ofs     = 0x100000,
+    }, {
         /* terminating entry */
     }
 };
@@ -189,11 +197,21 @@
         .hw_rev        = 1,
         .layout_id    = "4M",
     }, {
+        .id        = "TL-MR3220v2",
+        .hw_id        = HWID_TL_MR3220_V2,
+        .hw_rev        = 1,
+        .layout_id    = "4Mlzma",
+    }, {
         .id        = "TL-MR3420v1",
         .hw_id        = HWID_TL_MR3420_V1,
         .hw_rev        = 1,
         .layout_id    = "4M",
     }, {
+        .id        = "TL-MR3420v2",
+        .hw_id        = HWID_TL_MR3420_V2,
+        .hw_rev        = 1,
+        .layout_id    = "4Mlzma",
+    }, {
         .id        = "TL-WA701Nv1",
         .hw_id        = HWID_TL_WA701N_V1,
         .hw_rev        = 1,

pastebin-diff

Download (iix)
http://openwrt.agromapia.com/firmware/aarc1/

Download (int)
https://www.box.com/s/qebaprwq0798dyu19h1c

folder contains:

md5sums
openwrt-ar71xx-generic-tl-mr3020-v1-squashfs-factory.bin
openwrt-ar71xx-generic-tl-mr3220-v1-squashfs-factory.bin
openwrt-ar71xx-generic-tl-mr3220-v2-squashfs-factory.bin
openwrt-ar71xx-generic-tl-mr3420-v1-squashfs-factory.bin
openwrt-ar71xx-generic-tl-mr3420-v2-squashfs-factory.bin

Previous firmware:
https://www.box.com/s/cqk23ztqlux1zs034896[/spoiler]

Mission Accomplished

https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcRQXgOGs5oW9_YFoQvf-f9OqZg6Lt_N0V17VpbNGeQyiFfZ2o7U

sip miss, good job big_smile

Hi!

Is it possible to install OpenWRT on TL-MR3420 without access to serial port? I have full access (via telnet) to my busybox installed on default firmware with 'dd' tool and I can dump and (probably) write MTD devices.

Any hints? wink

martek1 wrote:

Hi!

Is it possible to install OpenWRT on TL-MR3420 without access to serial port? I have full access (via telnet) to my busybox installed on default firmware with 'dd' tool and I can dump and (probably) write MTD devices.

Any hints? wink

What is your current firmware on 3420 , and what is your hardware version.