ega2002 wrote:
Hello, I've got bricked Dlink DAP-1513 ...
I've successfully restored the device, now all's working fine!
Topic: Realtek SoC support in OpenWrt
The content of this topic has been archived between 22 Sep 2016 and 30 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 12 of 13
Hi. I have d-link dir-825D1 with rtl8197D on the board. Trying to get access to UART. I think i found pins and now i trying to connect through rs-232 with PuTTY. i'v benn tryed most of settings for com-port, but have only chunk in console when connecting to rtl. Who can help me with access to SoC?
sorry for bad English.
Device is for experiments. Feel free to use it over my hands.
Connection with rtl over rs-232 is in windows8.1. but i can install virtual machin with debian for linking and oher needs.
Hardware photos:
https://drive.google.com/folderview?id= … sp=sharing
white cable is (as i think) in uart.
lagunax wrote:
Hi. I have d-link dir-825D1 with rtl8197D on the board. Trying to get access to UART. I think i found pins and now i trying to connect through rs-232 with PuTTY. i'v benn tryed most of settings for com-port, but have only chunk in console when connecting to rtl. Who can help me with access to SoC?
sorry for bad English.
Device is for experiments. Feel free to use it over my hands.
Connection with rtl over rs-232 is in windows8.1. but i can install virtual machin with debian for linking and oher needs.
Hardware photos:
https://drive.google.com/folderview?id= … sp=sharing
white cable is (as i think) in uart.
First of all you should know that the PC RS-232 port actually is NOT the port you need. You have to use TTL adapter (FT232*/CH34*/PL230*/etc...). Some explanations are here.
If you already use the cable/adapter try another port/computer/operation system/cable/adapter.
ega2002 wrote:
ega2002 wrote:Hello, I've got bricked Dlink DAP-1513 ...
I've successfully restored the device, now all's working fine!
Could you please provide any details regarding to restoration process? I've got my DIR-825/AC bricked similar way (flash was erased completely).
I have a D-Link Dir600 Rev D1 https://wikidevi.com/wiki/D-Link_DIR-300_rev_D1. It has a serial on board. How can I go about using it,
the pins are circled in red
HI. I have installed Openwrt to UR-825AC. I need to install the sane and the print server. Help me please, is it possible now or later? Now I have the problem because all links in configuration are wrong, for example http://downloads.openwrt.org/barrier_br … ldpackages
rzzzh wrote:
ega2002 wrote:ega2002 wrote:Hello, I've got bricked Dlink DAP-1513 ...
I've successfully restored the device, now all's working fine!
Could you please provide any details regarding to restoration process? I've got my DIR-825/AC bricked similar way (flash was erased completely).
Did you run the flash utility on the device which erased a part of your boot loader? :x
gilb wrote:
rzzzh wrote:ega2002 wrote:I've successfully restored the device, now all's working fine!
Could you please provide any details regarding to restoration process? I've got my DIR-825/AC bricked similar way (flash was erased completely).
Did you run the flash utility on the device which erased a part of your boot loader? :x
Looks like i did. Recklessly, yea.
Is there way to bring router back to work? I even have 25xx eeprom SPI programmer now (only after everything has been bricked, lol).
ADD: however, i've dumped contents of my router's eeprom and found out that actually everything looks fine. Bootloader seems to be on it's place. Although, router is not going to boot when i switch it on. Both power leds (green and blue) lights constantly, the same with red+green status leds, UART does not respond (and there is no any output to it).
(Last edited by rzzzh on 27 Apr 2016, 00:47)
rzzzh wrote:
gilb wrote:rzzzh wrote:Could you please provide any details regarding to restoration process? I've got my DIR-825/AC bricked similar way (flash was erased completely).
Did you run the flash utility on the device which erased a part of your boot loader? :x
Looks like i did. Recklessly, yea.
Is there way to bring router back to work? I even have 25xx eeprom SPI programmer now (only after everything has been bricked, lol).ADD: however, i've dumped contents of my router's eeprom and found out that actually everything looks fine. Bootloader seems to be on it's place. Although, router is not going to boot when i switch it on. Both power leds (green and blue) lights constantly, the same with red+green status leds, UART does not respond (and there is no any output to it).
That happened to me a couple of days ago >_> haven't got it working yet.
I don't have an SPI programmer on hand and I don't have much experience with desoldering anyway...
From what I know the flash command ends up corrupting the bootloader starting at offset 0x6000 in the flash.
If you're able to program the flash through an SPI programmer you should be able to fix it.
Do you have a backup of the original flash content?
If not, I do and can send it to you 
Also, can you send me a copy of your corrupted dump please?
EDIT: you can probably fix it using JTAG as well, but I'm not sure if this router has working JTAG pins.. never checked
(Last edited by gilb on 27 Apr 2016, 08:34)
gilb wrote:
Do you have a backup of the original flash content?
No, i haven't, so it will be great if you send me yours
And i'll send you my corrupted dump as well, no problem about that.
My email is in@tech-ranzhe.ru
As about JTAG, i presume it as a kind of last resort, but i hope that flashing your dump will help
Thank you in advance!
Hi everyone,
I have a DIR-612 with rtl8196e on the board. Is there an openwrt image for rtl8196e I could use?
Thanks!
Hi, are there any images for the TL-WR841HP router?
Hello!!
I've bricked my d-link dir-615 t1 (rtl8196e and rtl8192er), and I need the bootloader (or full dump flash) to try to recovery... I think that any d-link rtl8196e bootloader will work, someone here could help me ?
Thanks!!
felipelkmais wrote:
Hello!!
I've bricked my d-link dir-615 t1 (rtl8196e and rtl8192er), and I need the bootloader (or full dump flash) to try to recovery... I think that any d-link rtl8196e bootloader will work, someone here could help me ?Thanks!!
inversiya wrote:
felipelkmais wrote:Hello!!
I've bricked my d-link dir-615 t1 (rtl8196e and rtl8192er), and I need the bootloader (or full dump flash) to try to recovery... I think that any d-link rtl8196e bootloader will work, someone here could help me ?Thanks!!
Thanks!!! It worked... but i think that this is the original realtek bootloader, or this is the d-link bootloader?
Because the emergency tftp of dlink isn't working, and the tftp to 192.168.1.6 doesn't accept dlink firmware...
But thank you very much, at least I restored the access to it!!
Hi, can I help
Do not load the interface of the eht0 ... eth5
ifconfig is empty
This my log
4.MXIC SPI (4 MByte)!
spi_flash.c: Set SPI clock < 40MHZ for low-speed SPI Flash
spi_flash.c: Set No dummy cycle
---RealTek(RTL8196C)at 2010.08.19-10:49+0800 version v1.1c [16bit](390MHz)
Jump to image start=0x80500000...
OpenWrt kernel loader for Realtek rtl819xx
Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
Copyright (C) 2013 Roman Yeryomin <roman@advem.lv>
Decompressing kernel to 80000000... done!
Seems kernel_entry address is different from load address, so...
Starting kernel from 80003530...
[ 0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.010000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.020000] Memory: 9968k/16384k available (2829k kernel code, 6416k reserved, 723k data, 100k init, 0k highmem)
[ 0.030000] Calibrating delay loop... 389.12 BogoMIPS (lpj=1945600)
[ 0.250000] Mount-cache hash table entries: 512
[ 1.260000] USB 2.0 PHY Patch Done.
[ 1.300000] reg e0=99
[ 1.340000] reg e1=a8
[ 1.370000] reg e2=98
[ 1.410000] reg e3=c1
[ 1.450000] reg e4=1
[ 1.490000] reg e5=91
[ 1.520000] reg e6=98
[ 1.560000] reg e7=34
[ 1.600000] reg f0=fc
[ 1.640000] reg f1=8c
[ 1.670000] reg f2=0
[ 1.710000] reg f3=11
[ 1.750000] reg f4=e3
[ 1.790000] reg f5=d2
[ 1.820000] reg f6=0
[ 1.830000] net_namespace: 780 bytes
[ 1.850000] NET: Registered protocol family 16
[ 1.900000] bio: create slab <bio-0> at 0
[ 1.910000] usbcore: registered new interface driver usbfs
[ 1.920000] usbcore: registered new interface driver hub
[ 1.930000] usbcore: registered new device driver usb
[ 1.950000] NET: Registered protocol family 2
[ 1.960000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 1.970000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 1.980000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 1.990000] TCP: Hash tables configured (established 512 bind 512)
[ 2.000000] TCP reno registered
[ 2.010000] NET: Registered protocol family 1
[ 2.030000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.040000] Registering mini_fo version $Id$
[ 2.050000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 2.060000] msgmni has been set to 19
[ 2.080000] io scheduler noop registered
[ 2.090000] io scheduler cfq registered (default)
[ 2.100000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 2.110000] serial8250: ttyS0 at MMIO 0x18002000 (irq = 23) is a 16550A
[ 2.130000] PPP generic driver version 2.4.2
[ 2.140000] PPP Deflate Compression module registered
[ 2.150000] PPP BSD Compression module registered
[ 2.160000] MPPE/MPPC encryption/compression module registered
[ 2.170000] NET: Registered protocol family 24
[ 2.180000] tun: Universal TUN/TAP device driver, 1.6
[ 2.190000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.200000] Realtek WLAN driver - version 1.6 (2013-02-21)
[ 2.210000] wlan_index:0 0, 134,0xb9000000,0xb8b10000,11
[ 2.220000] =====>>INSIDE rtl8192cd_init_one <<=====
[ 2.230000] sizeof(struct rtl8192cd_priv) = 161152
[ 2.540000] 96C - 40MHz Clock Source
[ 3.270000] vendor_deivce_id=819110ec
[ 3.300000] =====>>EXIT rtl8192cd_init_one <<=====
[ 3.310000] =====>>INSIDE rtl8192cd_init_one <<=====
[ 3.320000] sizeof(struct rtl8192cd_priv) = 161152
[ 3.330000] =====>>EXIT rtl8192cd_init_one <<=====
[ 3.340000] =====>>INSIDE rtl8192cd_init_one <<=====
[ 3.350000] sizeof(struct rtl8192cd_priv) = 161152
[ 3.370000] =====>>EXIT rtl8192cd_init_one <<=====
[ 3.380000]
[ 3.380000]
[ 3.380000]
[ 3.380000] Probing RTL8186 10/100 NIC-kenel stack size order[3]...
[ 3.390000] chip name: 8196C, chip revid: 0
[ 3.410000] Set 8196C PHY Patch OK
[ 3.420000] NOT YET
[ 3.440000] Set threshould idx 0
[ 3.450000] eth0 added. vid=9 Member port 0x1...
[ 3.460000] eth1 added. vid=8 Member port 0x10...
[ 3.470000] eth2 added. vid=9 Member port 0x2...
[ 3.480000] eth3 added. vid=9 Member port 0x4...
[ 3.500000] eth4 added. vid=9 Member port 0x8...
[ 3.510000] eth5 added. vid=9 Member port 0x0...
[ 3.530000] [peth0] added, mapping to [eth1]...
[ 3.540000] SPI INIT
[ 3.550000] ========================= Registed SPI Flash Model =========================
[ 3.560000] |No chipID Sft chipSize blkSize secSize pageSize sdCk opCk chipName |
[ 3.570000] | 0 c22016h 0h 400000h 10000h 1000h 100h 50 0 MX25L3206E|
[ 3.580000] ============================================================================
[ 3.590000] SPI flash(MX25L3206E) was found at CS0, size 0x400000
[ 3.600000] Creating 4 MTD partitions on "flash_bank_1":
[ 3.610000] 0x000000000000-0x000000010000 : "boot+cfg"
[ 3.620000] 0x000000010000-0x000000130000 : "kernel"
[ 3.630000] 0x000000130000-0x000000400000 : "rootfs"
[ 3.640000] mtd: partition "rootfs" set to be root filesystem
[ 3.650000] mtd: partition "rootfs_data" created automatically, ofs=3AD000, len=53000
[ 3.660000] 0x0000003ad000-0x000000400000 : "rootfs_data"
[ 3.670000] 0x000000010000-0x000000400000 : "firmware"
[ 3.680000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.690000] rtl819x-ehci rtl819x-ehci: Realtek rtl819x On-Chip EHCI Host Controller
[ 3.700000] rtl819x-ehci rtl819x-ehci: new USB bus registered, assigned bus number 1
[ 3.750000] rtl819x-ehci rtl819x-ehci: irq 10, io mem 0x18021000
[ 3.790000] rtl819x-ehci rtl819x-ehci: USB 2.0 started, EHCI 1.00
[ 3.800000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.810000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.820000] usb usb1: Product: Realtek rtl819x On-Chip EHCI Host Controller
[ 3.830000] usb usb1: Manufacturer: Linux 2.6.30.9 ehci_hcd
[ 3.840000] usb usb1: SerialNumber: rtl819x-ehci
[ 3.850000] usb usb1: configuration #1 chosen from 1 choice
[ 3.860000] hub 1-0:1.0: USB hub found
[ 3.870000] hub 1-0:1.0: 1 port detected
[ 3.880000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.890000] rtl819x-ohci rtl819x-ohci: Realtek rtl819x built-in OHCI controller
[ 3.900000] rtl819x-ohci rtl819x-ohci: new USB bus registered, assigned bus number 2
[ 3.910000] rtl819x-ohci rtl819x-ohci: irq 10, io mem 0x18020000
[ 3.990000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.000000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.010000] usb usb2: Product: Realtek rtl819x built-in OHCI controller
[ 4.020000] usb usb2: Manufacturer: Linux 2.6.30.9 ohci_hcd
[ 4.030000] usb usb2: SerialNumber: rtl819x-ohci
[ 4.040000] usb usb2: configuration #1 chosen from 1 choice
[ 4.050000] hub 2-0:1.0: USB hub found
[ 4.060000] hub 2-0:1.0: 1 port detected
[ 4.070000] nf_conntrack version 0.5.0 (256 buckets, 1024 max)
[ 4.080000] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 4.090000] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 4.100000] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 4.110000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.120000] TCP cubic registered
[ 4.140000] NET: Registered protocol family 17
[ 4.150000] Netlink[Kernel] create socket for igmp ok.
[ 4.160000] Realtek FastPath:v1.03
[ 4.190000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 4.200000] Freeing unused kernel memory: 100k freed
[ 4.230000] Warning: unable to open an initial console.
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
jffs2 not ready yet; using ramdisk
[ 11.940000] mini_fo: using base directory: /
[ 11.950000] mini_fo: using storage directory: /tmp/root
- init -
Please press Enter to activate this console. [ 15.290000] NET: Registered protocol family 10
[ 15.310000] lo: Disabled Privacy Extensions
[ 16.620000] SCSI subsystem initialized
[ 19.230000] xt_time: kernel timezone is -0000
[ 19.530000] Driver 'sd' needs updating - please use bus_type methods
[ 23.130000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 25.320000] usbcore: registered new interface driver usblp
[ 25.440000] usbcore: registered new interface driver usbserial
[ 25.450000] usbserial: USB Serial Driver core
[ 27.400000] Initializing USB Mass Storage driver...
[ 27.410000] usbcore: registered new interface driver usb-storage
[ 27.420000] USB Mass Storage support registered.
[ 30.260000] USB Serial support registered for GSM modem (1-port)
[ 30.270000] usbcore: registered new interface driver option
[ 30.280000] option: v0.7.2:USB Driver for GSM modems
[ 60.900000] u32 classifier
[ 60.910000] Actions configured
[ 74.740000] Mirror/redirect action on
BusyBox v1.19.4 (2016-07-03 21:57:48 EEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r36713)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------How do I configure the parameters to build this for the TL-WR841HP? How do I add Luci (is it there by default or should I apply a patch)? Once compiled can I install it from TP-Link's GUI?
Hi! I have ZTE H118N - hardware ver 2.3 (main board: ZXV10 - H108La/ZXHN H118Na) using Realtek RTL8676S/RTL8192ER processor. EEPROM/Flash: Winbond 25Q128FVSG
How can i find openwrt or build firmware from openwrt for it.
BusyBox v1.01 (2015.05.20-08:47+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
# help
Built-in commands:
-------------------
. : break cd chdir continue eval exec exit export false hash
help local pwd read readonly return set shift times trap true
type ulimit umask unset wait [ ash brctl busybox cat chmod cp
date df diagput echo free fuser getty hostname ifconfig init
insmod kill killall linuxrc ln login ls lsmod mkdir mknod mount
mv passwd ping ping6 ps pwd reboot rm rmdir rmmod setmac sh sleep
test tftp top traceroute umount wget
****************************************************************************************************************************************************
Booting
Press '1' to enter BOOT console...
Press '2' to enter DEBUG mode......
Ext. phy is not found.
To read reset key,if on,to update
zteboot mtd has been registered successfully.Ext. phy is not found.
memtop = 80000000
(c)Copyright Realtek, Inc. 2011
Project RTL8676 LOADER (LZMA)
Version V2.3 (May 20 2015 16:31:37)
<RTL867X>
*****************************************************************************************************************************************************
Booting
Press '1' to enter BOOT console...
Press '2' to enter DEBUG mode......
Ext. phy is not found.
To read reset key,if on,to update
zteboot mtd has been registered successfully.Ext. phy is not found.
memtop = 80000000
the romfsaddr address is 9d080000
Found image at 0xbd5e0000
the romfsaddr address is 9daa0000
Found image at 0xbd840000
Flash owned validImgNum: 2 foundVer: 2
****Try the first image...
para->BootParaCksum= 99e
ok!
Linux version 2.6.30.9 (xia@njzd) (gcc version 4.4.7 (Realtek RSDK-1.5.8p1 Build 1050) ) #2 Wed May 20 17:05:49 CST 2015
Check boot para cksum...
boot para cksum OK!
cq,0x10101,img=1bootPara.runmode=3
CPU revision is: 0000dc01
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Zone PFN ranges:
Normal 0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00002000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Kernel command line: console=ttyS0,115200 mem=32M root=31:3
root_dev_setup line 170 root: 31:3
icache: 16kB/32B, dcache: 8kB/32B, scache: 0kB/0B
NR_IRQS:128
PID hash table entries: 128 (order: 7, 512 bytes)
Timer: Div=1000, Data=2000
console [ttyS0] enabled
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 22376k/32768k available (2936k kernel code, 10392k reserved, 1109k data, 128k init, 0k highmem)
Calibrating delay loop... 448.92 BogoMIPS (lpj=2244608)
Mount-cache hash table entries: 512
IMEM section size = 0x7e40
pdt_cspkernel_init
NET: Registered protocol family 16
11930:22:53 [Klogctl][Info] [(1584)LogCtlInit] LogCtlInit begin
11930:22:53 [Klogctl][Info] [(1256)AddLogtab] AddLogtab: pLogTab=803f2990,wLogTabNum=64,dwLogTabIDBase = 0X00000000
11930:22:53 [Klogctl][Info] [(1352)AddLogOutModule] AddLogOutModule:OutputMode=0X00000200,ptLogProcSet=81c17b88
11930:22:53 [Klogstdio][Info] [(1082)LogStdioProcInit] LogStdioProcInit
11930:22:53 [Klogctl][Info] [(1352)AddLogOutModule] AddLogOutModule:OutputMode=0X00000100,ptLogProcSet=81c17b88
11930:22:53 [Klogfile][Info] [(2939)LogFileProcInit] LogFileProcInit
11930:22:53 [Klogfile][Info] [(2951)LogFileProcInit] g_dwUptime is 0
11930:22:53 [Klogctl][Info] [(1352)AddLogOutModule] AddLogOutModule:OutputMode=0X00000400,ptLogProcSet=81c17b88
11930:22:53 [Klogserv][Info] [(494)LogServerProcInit] LogServerProcInit
11930:22:53 [Klogctl][Info] [(1256)AddLogtab] AddLogtab: pLogTab=803f44b0,wLogTabNum=2,dwLogTabIDBase = 0X00080000
11930:22:53 [Klogctl][Info] [(1401)SetLogOutputMode] SetLogOutputMode:bType=1,OutputMode=0X00000700
11930:22:53 [Klogctl][Info] [(1479)SetLogConf] SetLogConf OutputMode=0X00000100,pBuf=81c179e0,iLen=88
11930:22:53 [Klogfile][Info] [(2758)ProcLogConf] Set LOG_FILE_CONF_SET_PDTCONF
11930:22:53 [Klogfile][Info] [(2846)ProcLogConf] Set LogFileFormatTimestamp
11930:22:53 [Klogctl][Info] [(1635)LogCtlInit] LogCtlInit end
11930:22:53 [KLogCtl][Notice] [oss_logctl.c(291)ProcLog] System start!
11930:22:53 [Klogfile][Info] [(475)InitLogSaveBuff] InitLogSaveBuff
11930:22:53 [KMONITOR][Notice] [monitor.c(505)MonitorInit] cspmonitor init... !
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usb_enable_IP: ipsel = 0x01f006e9, phyCtrl2 = 0x048020c0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
11930:22:53 [MIRROR][Notice] [cspmirror.c(699)MirrorInit] CspMirror start init ...
11930:22:53 [KQOS][Info] [qos.c(380)CSPKernel_QC_In] Qos module init
NET: Registered protocol family 2
ip_rt_init() start call CSP_alloc_large_system_hash
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
ip_rt_init() call CSP_alloc_large_system_hash end
<6>TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
Realtek GPIO Driver for Flash Reload Default
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2. © 2001-2006 Red Hat, Inc.
msgmni has been set to 43
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 13) is a 16550A
Driver 'sd' needs updating - please use bus_type methods
RTL8192C/RTL8188C driver version 1.5 (2013-02-19 r2891 (8192E))
Adaptivity function - version 7.1
wlan_index:0 0, 6,0xb9000000,0xb8b10000,14
=====>>INSIDE rtl8192cd_init_one <<=====
Find Port_num=0, Vender_Device_ID=0x818B10EC
7305vendor_deivce_id=818b10ec
found 8192E !!!
HalAssociateNic OK
rtl8192cd_set_hwaddr(6094): Can't write MACID register
rtl8192cd_set_hwaddr(6094): Can't write MACID register
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: GPIO_PIN_CTRL[0x44]
<rtl8192cd_init_one>LZQ: before read tmpReg[0x1010bc]
<rtl8192cd_init_one>LZQ: after read tmpReg[0xbc]
=====>>INSIDE rtl8192cd_init_one <<=====
rtl8192cd_set_hwaddr(6094): Can't write MACID register
rtl8192cd_set_hwaddr(6094): Can't write MACID register
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: GPIO_PIN_CTRL[0x44]
<rtl8192cd_init_one>LZQ: before read tmpReg[0xbc]
<rtl8192cd_init_one>LZQ: after read tmpReg[0xbc]
=====>>INSIDE rtl8192cd_init_one <<=====
rtl8192cd_set_hwaddr(6094): Can't write MACID register
rtl8192cd_set_hwaddr(6094): Can't write MACID register
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: GPIO_PIN_CTRL[0x44]
<rtl8192cd_init_one>LZQ: before read tmpReg[0xbc]
<rtl8192cd_init_one>LZQ: after read tmpReg[0xbc]
=====>>INSIDE rtl8192cd_init_one <<=====
rtl8192cd_set_hwaddr(6094): Can't write MACID register
rtl8192cd_set_hwaddr(6094): Can't write MACID register
=====>>EXIT rtl8192cd_init_one <<=====
<rtl8192cd_init_one>LZQ: GPIO_PIN_CTRL[0x44]
<rtl8192cd_init_one>LZQ: before read tmpReg[0xbc]
<rtl8192cd_init_one>LZQ: after read tmpReg[0xbc]
init ok!!!wlan_index:1
flash device: 0x1000000 at 0xbd000000
spi probe...
SFCR:0xb8001200 SFCSR:0xb8001208 SFDR:0xb800120c
can not get SPI chip driver!
can not get SPI chip driver!
can not get SPI chip driver!
can not get SPI chip driver!
WINBOND matched!!
get SPI chip driver!
Physically mapped flash: Found an alies 0x1000000 for the chip at 0x0, WINBOND device detect.
Creating 7 MTD partitions on "Physically mapped flash":
0x000000000000-0x000001000000 : "whole_flash"
0x000000000000-0x000000020000 : "bootloader"
0x000000020000-0x000000080000 : "userconfig"
0x000000080000-0x0000005e0000 : "filesystem1"
0x0000005e0000-0x000000840000 : "kernel1"
0x000000840000-0x000000aa0000 : "kernel2"
0x000000aa0000-0x000001000000 : "filesystem2"
u32 classifier
Actions configured
nf_conntrack version 0.5.0 (256 buckets, 2048 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
netfilter PSD loaded - (c) astaro AG
NET: Registered protocol family 1
NET: Registered protocol family 10
6WIND/LSIIT IPv6 multicast forwarding 0.1 plus PIM-SM/SSM with *BSD API
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
af_packet.c packet_init call register_netdevice_notifier
Bridge firewalling registered
br_init call register_netdevice_notifier
Ebtables v2.0 registered
NET: Registered protocol family 24
PPP Deflate Compression module registered
11930:22:54 [LEDKEYDRV][Info] [ledkey_mod.c(1713)LedkeymodInit] Ledkey_mod Driver Version 0.0.1.
11930:22:54 [LEDKEYDRV][Info] [ledkey_mod.c(1764)LedkeymodInit] watchdog enable!
watchdog started
11930:22:54 [TAGPARAM][Info] [tagparam_mod.c(1377)TagaramodInit] Tagaram module Driver Version 0.0.1.
11930:22:54 [TAGPARAM][Info] [tagparam_mod.c(1417)TagaramodInit] parse tag param success
11930:22:54 [km255][Info] [ver_info.c(349)ver_info_init] ver_info_init
________________CspGetVerInfo____________________
bootPara.bootWhichImg=1
bootPara.img_info_tbl[0].flashOffset=0x 5e0000
g_MaxNumOfFirmWare =2
sHardVersion=V2.3
11930:22:54 [km255][Info] [ver_info.c(138)ReadInfoFromVer] ver_info_init
11930:22:54 [km255][Info] [ver_info.c(145)ReadInfoFromVer] ver_info_init
11930:22:54 [km255][Info] [ver_info.c(161)ReadInfoFromVer] wFirmwareForm is:0x1
11930:22:54 [KSWETH][Notice] [csp_ifinfo.c(191)csp_ifinfo_init] Initializing CSP IFinfo...
11930:22:54 [KSWETH][Warn] [csp_ifinfo.c(213)csp_ifinfo_init] No IFinfo in flash!
11930:22:54 [KSWETH][Notice] [sweth_core.c(2861)sweth_init] SWÐ HAL driver initing!
11930:22:54 [KSWETH][Notice] [sweth_core.c(152)CreateSwEthObjs] Create SW & ETH objects
11930:22:54 [KSWETH][Notice] [sweth_core.c(168)CreateSwEthObjs] Failed to get SWITCH attr, iRet=-2
11930:22:54 [KSWETH][Info] [sweth_core.c(175)CreateSwEthObjs] nEmac = 1, nSw = 0, nEth=5.
11930:22:54 [KSWETH][Info] [sweth_core.c(334)CreateSwEthObjs] ETH obj0: PhyType = 0, Is_assoc_sw = 0, Emac = 0, Phy = 4
11930:22:54 [KSWETH][Info] [sweth_core.c(334)CreateSwEthObjs] ETH obj1: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 3
11930:22:54 [KSWETH][Info] [sweth_core.c(334)CreateSwEthObjs] ETH obj2: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 2
11930:22:54 [KSWETH][Info] [sweth_core.c(334)CreateSwEthObjs] ETH obj3: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 1
11930:22:54 [KSWETH][Info] [sweth_core.c(334)CreateSwEthObjs] ETH obj4: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 0
Probing RTL8186 10/100 NIC-kenel stack size order[2]...
chip name: 8196B, chip revid: 0
NOT YET
Set threshould idx 0
Set threshould idx 1
[0]eth4 added. vid=9 Member port 0x1...
11930:22:54 [KSWETH][Warn] [sweth_core.c(899)assoc_eth_obj_w] ETH obj 4 is already associated with device eth4 !
[1]eth3 added. vid=9 Member port 0x2...
11930:22:54 [KSWETH][Warn] [sweth_core.c(899)assoc_eth_obj_w] ETH obj 3 is already associated with device eth3 !
[2]eth2 added. vid=9 Member port 0x4...
11930:22:54 [KSWETH][Warn] [sweth_core.c(899)assoc_eth_obj_w] ETH obj 2 is already associated with device eth2 !
[3]eth1 added. vid=9 Member port 0x8...
11930:22:54 [KSWETH][Warn] [sweth_core.c(899)assoc_eth_obj_w] ETH obj 1 is already associated with device eth1 !
[4]eth0 added. vid=8 Member port 0x10...
11930:22:54 [KSWETH][Warn] [sweth_core.c(899)assoc_eth_obj_w] ETH obj 0 is already associated with device eth0 !
[peth0] added, mapping to [eth0]...
11930:22:54 [KSWETH][Notice] [reltk_mac_adapt(639)Register_reltk_] Register reltk EMAC driver
11930:22:54 [KSWETH][Notice] [sweth_core.c(613)RegisterEmacDrv] Register EMAC driver
11930:22:54 [KSWETH][Notice] [sweth_core.c(441)InitSwEthObjs] Initialise SW & ETH objects
11930:22:54 [KSWETH][Warn] [sweth_core.c(1872)hal_set_port_ma] Driver do not support set MAC address!
eth0 set netif mac to: 74:a7:8e:ee:72:46
11930:22:54 [KSWETH][Warn] [sweth_core.c(1872)hal_set_port_ma] Driver do not support set MAC address!
eth4 set netif mac to: 74:a7:8e:ee:72:46
11930:22:54 [KSWETH][Warn] [sweth_core.c(1872)hal_set_port_ma] Driver do not support set MAC address!
eth3 set netif mac to: 74:a7:8e:ee:72:46
11930:22:54 [KSWETH][Warn] [sweth_core.c(1872)hal_set_port_ma] Driver do not support set MAC address!
eth2 set netif mac to: 74:a7:8e:ee:72:46
11930:22:54 [KSWETH][Warn] [sweth_core.c(1872)hal_set_port_ma] Driver do not support set MAC address!
eth1 set netif mac to: 74:a7:8e:ee:72:46
11930:22:54 [KFASTFORWARD][Info] [ff_api.c(54)cspFastL2HookRe] CSP_FF_L2_DEL_HOOK register ok.
11930:22:54 [KFASTFORWARD][Info] [ff_api.c(60)cspFastL2HookRe] CSP_FF_L2_AGE_HOOK register ok.
11930:22:54 [KFASTFORWARD][Info] [ff_api.c(66)cspFastL2HookRe] CSP_FF_L2_CLR_HOOK register ok.
11930:22:54 [KFASTFORWARD][Info] [ff_api.c(165)cspFastL3HookRe] CSP_FF_L3_DEL_HOOK register ok.
11930:22:54 [KFASTFORWARD][Info] [ff_api.c(171)cspFastL3HookRe] CSP_FF_L3_AGE_HOOK register ok.
11930:22:54 [KFASTFORWARD][Info] [ff_api.c(177)cspFastL3HookRe] CSP_FF_L3_CLR_HOOK register ok.
11930:22:54 [KMCFAST][Info] [mc_fast_api.c(55)cspMCFFDelMacHo] CSP_MCFF_DEL_MAC_HOOK register ok.
11930:22:54 [KMCFAST][Info] [mc_fast_api.c(36)cspMCFFDelVerEn] CSP_MCFF_DEL_VER_ENTRY_HOOK register ok.
11930:22:54 [KMCFAST][Info] [mc_fast_api.c(77)cspMFFDDelHookR] CSP_MFFD_DEL_HOOK register ok.
11930:22:54 [KMCFAST][Info] [mc_fast_api.c(148)cspMFFCDelHookR] CSP_MFFC_DEL_HOOK register ok.
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Freeing unused kernel memory: 128k freed
init started: BusyBox v1.01 (2015.05.20-08:47+0000) multi-call binary
Starting pid 19, console /dev/ttyS0: '/etc/rc'
init normal mode!!!
Loading drivers and kernel modules...
lo up
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0 up
device eth0 entered promiscuous mode
/etc/init.norm: 70: ttynetd-server: not found
Starting pid 53, console /dev/ttyS0: '/sbin/getty'
11930:22:57 [User][Info] [db_shm_mgr.c(67)DBShmOpenLib] Open libdbcspview.so SUCCESS
11930:22:57 [User][Info] [db_shm_mgr.c(87)DBShmSrvInit] iShmId:0
11930:22:57 [User][Info] [db_shm_mgr.c(102)DBShmSrvInit] pShmBuf:60000000
ZXHN H118N
Login: 11930:22:58 [Klogfile][Info] [(1523)AddLogBuf] Time over,NeedSave=0!
11930:22:59 [FLASHRW][Info] [proc_file_mod.c(1267)file_open] open file: /proc/cfg/logconf
11930:22:59 [FLASHRW][Info] [proc_file_mod.c(1397)file_close] close file: /proc/cfg/logconf
11930:22:59 [FLASHRW][Info] [proc_file_mod.c(1267)file_open] open file: /proc/cfg/log
11930:22:59 [FLASHRW][Info] [proc_file_mod.c(1397)file_close] close file: /proc/cfg/log
11930:23:00 [dhcps][Info] [dhcps.c(109)DHCPSInit] module init success!dhcp server
11930:23:00 [DB][Info] [dbc_core.c(878)dbEndTm] (dbViewMgrInit) end, use 0 tick
11930:23:00 [DB][Info] [dbc_core.c(878)dbEndTm] (dbVIEWIDInit) end, use 0 tick
11930:23:00 [monitor][Info] [cspd_monitor.c(313)MonitorMain] monitor init success
11930:23:00 [time_plc][Info] [time_policy.c(112)TpInit] module init success!2
11930:23:00 [eth_mgr][Info] [eth_mgr.c(1450)ethInit] module init success!ethernet mgr
11930:23:00 [flow_rate_mgr][Info] [flow_rate_stats(482)flowRateStatsIn] flowRateStatsInit OK
11930:23:00 [DB][Info] [dbc_tbl_dhcp6s_(50)dbCreateDHCP6SH] dbCreateDHCP6SHostCfgTbl ok
11930:23:00 [wancppp_mgr][Info] [wancppp_mgr.c(1228)wancpppInit] module init success!
11930:23:00 [DB][Info] [dbc_core.c(878)dbEndTm] (dbTblMgrInit) end, use 6 tick
11930:23:00 [ifs_mgr][Info] [ifs_main.c(221)ifsInit] Ifs Init Ok
11930:23:00 [adapt_mgr][Info] [brgrp_mgr.c(1803)brgrpMgrInit] module init success!(BrGrp mgr)
11930:23:00 [adapt_mgr][Info] [ifs_adapt_mgr.c(1612)ifsAdaptInit] ifs adaptor init ok!
11930:23:00 [ptry_mgr][Info] [ptry_mgr.c(478)ptryMgrInit] module init success!(PTry mgr)
11930:23:00 [wwan_mgr][Info] [wwan_mgr.c(673)WwanMgrInit] module init success!wwan mgr
11930:23:00 [route_mgr][Info] [route_mgr.c(6116)serviceInit] start to get service info.........
11930:23:00 [route_mgr][Info] [route_mgr.c(6125)serviceInit] enable 3 services!
11930:23:00 [route_mgr][Info] [route_mgr.c(6145)serviceInit] enable pppoeproxy services!
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1411)dbSetValComm] not find domain table(IGMPProxy) domain(tEnable)
11930:23:00 [route_mgr][Info] [route_mgr.c(6154)serviceInit] enable lanbindwan services!
11930:23:00 [route_mgr][Info] [route_mgr.c(6163)serviceInit] enable PolicyRoute services!
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1411)dbSetValComm] not find domain table(IGMPProxy) domain(tWanCID)
11930:23:00 [route_mgr][Info] [route_mgr.c(6385)routeInit] module init success!route mgr
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1411)dbSetValComm] not find domain table(IGMPProxy) domain(tIgmpVersion)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1411)dbSetValComm] not find domain table(IGMPProxy) domain(tIgmpQueryVersion)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(1) table(DevAuthInfo)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(1) table(DevAuthInfo)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(1) table(DevAuthInfo)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(1) table(DevAuthInfo)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(1) table(DevAuthInfo)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(1) table(DevAuthInfo)
11930:23:00 [DB][Error] [dbc_mgr_def.c(131)dbMgrStaticSetI] key domain error table(MultiWD) domain(ViewName)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1411)dbSetValComm] not find domain table(MLDProxyCfg) domain(tMldVersion)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(4) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(4) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(4) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(4) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(4) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(4) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(4) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(4) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(4) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(4) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(5) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(5) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(5) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(5) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(5) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(5) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(5) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(5) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(5) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(5) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(6) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(6) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(6) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(6) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(6) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(6) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(6) table(WLANWMM)
11930:23:00 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(6) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(6) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(6) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(7) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(7) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(7) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(7) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(7) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(7) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(7) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(7) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(7) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(7) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(8) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(8) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(8) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(8) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(8) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(8) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(8) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(8) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(8) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(8) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(9) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(9) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(9) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(9) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(9) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(9) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(9) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(9) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(9) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(9) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(10) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(10) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(10) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(10) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(10) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(10) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(10) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(10) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(10) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(10) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(11) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(11) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(11) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(11) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(11) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(11) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(11) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(11) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(11) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(11) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(12) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(12) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(12) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(12) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(12) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(12) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(12) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(12) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(12) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(12) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(13) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(13) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(13) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(13) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(13) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(13) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(13) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(13) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(13) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(13) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(14) table(WLANWMM)
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(14) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(14) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(14) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(14) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(14) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(14) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(14) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(14) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(14) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(15) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(15) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(15) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(15) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(15) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(15) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(15) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(15) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(15) table(WLANWMM)
11930:23:02 [DB][Warn] [dbc_mgr_tbl.c(1527)dbSetValCommByR] not find row RowNo(15) table(WLANWMM)
11930:23:02 [DB][Info] [dbc_def_wdinfo_(23)dbDefWDInfo] dbDefWDInfo start
11930:23:02 [DB][Info] [dbc_core.c(878)dbEndTm] (dbDefMgrInit) end, use 206 tick
11930:23:02 [DB][Info] [dbc_core.c(878)dbEndTm] (dbInitPdtConfig) end, use 0 tick
11930:23:02 [DB][Warn] [dbc_person_dev_(121)dbPersonInitHVT] get parameter from Flash failed!HardwareVerTag
11930:23:02 [DB][Warn] [dbc_person_auth(47)dbPersonInitAut] get parameter from Flash failed!Username
11930:23:02 [DB][Warn] [dbc_person_auth(85)dbPersonInitAut] get parameter from Flash failed!Password
11930:23:02 [DB][Info] [dbc_person_mac_(71)dbPersonInitMAC] DB get MAC from flash success
11930:23:02 [DB][Warn] [dbc_person_wlan(98)dbPersonInitSSI] get parameter from Flash failed!userssid3
11930:23:02 [DB][Warn] [dbc_person_wlan(98)dbPersonInitSSI] get parameter from Flash failed!userssid4
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan0:sUserKey1
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan0:sUserKey2
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan0:sUserKey3
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan0:sUserKey4
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan1:sUserKey1
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan1:sUserKey2
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan1:sUserKey3
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan1:sUserKey4
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan2:sUserKey1
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan2:sUserKey2
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan2:sUserKey3
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan2:sUserKey4
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan3:sUserKey1
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan3:sUserKey2
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan3:sUserKey3
11930:23:02 [DB][Warn] [dbc_person_wlan(151)dbPersonInitWEP] get parameter from Flash failed!wlan3:sUserKey4
11930:23:02 [DB][Warn] [dbc_person_wlan(208)dbPersonInitPSK] get parameter from Flash failed!KeyPassphrase2
11930:23:02 [DB][Warn] [dbc_person_wlan(208)dbPersonInitPSK] get parameter from Flash failed!KeyPassphrase3
11930:23:02 [DB][Warn] [dbc_person_wlan(208)dbPersonInitPSK] get parameter from Flash failed!KeyPassphrase4
11930:23:02 [DB][Info] [dbc_core.c(878)dbEndTm] (CspDBInitProductPersonCfg) end, use 48 tick
11930:23:02 [FLASHRW][Info] [proc_file_mod.c(1267)file_open] open file: /proc/cfg/db_user_cfg.xml
11930:23:02 [FLASHRW][Info] [proc_file_mod.c(1397)file_close] close file: /proc/cfg/db_user_cfg.xml
11930:23:02 [FLASHRW][Info] [proc_file_mod.c(1267)file_open] open file: /proc/cfg/db_user_cfg.xml
11930:23:02 [FLASHRW][Info] [proc_file_mod.c(1397)file_close] close file: /proc/cfg/db_user_cfg.xml
11930:23:02 [FLASHRW][Info] [proc_file_mod.c(1267)file_open] open file: /proc/cfg/db_user_cfg.xml
11930:23:02 [FLASHRW][Info] [proc_file_mod.c(1397)file_close] close file: /proc/cfg/db_user_cfg.xml
11930:23:03 [DB][Info] [dbc_mgr_file.c(1160)dbFileLoadCfg] DB Decry cfg end (iRet: 0)
11930:23:03 [DB][Info] [dbc_mgr_file.c(1171)dbFileLoadCfg] find file /var/tmp/db_Decry_cfg.xml
11930:23:03 [Klogfile][Info] [(1429)AddLogBuf] Time over,LogBakBuf is full! i=1, filename=/proc/cfg/log, buflen=6644, bakbuflen=24, cnt=0, totalcnt=0
11930:23:03 [Klogfile][Info] [(1763)KLogThread] Need to save log file, sFileName=/proc/cfg/log, BakBufDataLen=24
11930:23:03 [FLASHRW][Info] [proc_file_mod.c(1267)file_open] open file: /proc/cfg/log
11930:23:03 [FLASHRW][Info] [proc_file_mod.c(1397)file_close] close file: /proc/cfg/log
11930:23:03 [Klogfile][Info] [(1871)KLogThread] KLogThread save log file over, ToWriteLen=0, ErrCnt=0
11930:23:03 [DB][Info] [dbc_mgr_file.c(1178)dbFileLoadCfg] DB load cfg end ! (iRet: 0)
11930:23:03 [FLASHRW][Info] [proc_file_mod.c(1267)file_open] open file: /proc/cfg/db_backup_cfg.xml
11930:23:03 [FLASHRW][Info] [proc_file_mod.c(1397)file_close] close file: /proc/cfg/db_backup_cfg.xml
11930:23:03 [FLASHRW][Info] [proc_file_mod.c(1267)file_open] open file: /proc/cfg/db_backup_cfg.xml
11930:23:03 [FLASHRW][Info] [proc_file_mod.c(1397)file_close] close file: /proc/cfg/db_backup_cfg.xml
11930:23:03 [FLASHRW][Info] [proc_file_mod.c(1267)file_open] open file: /proc/cfg/db_backup_cfg.xml
11930:23:03 [FLASHRW][Info] [proc_file_mod.c(1397)file_close] close file: /proc/cfg/db_backup_cfg.xml
11930:23:03 [DB][Info] [dbc_mgr_file.c(1642)dbFileSimpChk] DB Decry cfg end (iRet: 0)
11930:23:03 [DB][Info] [dbc_mgr_file.c(1654)dbFileSimpChk] find file /var/tmp/db_backup_cfg.xml
11930:23:03 [DB][Info] [dbc_mgr_file.c(1680)dbFileSimpChk] FIND</DB>!
11930:23:03 [DB][Info] [dbc_core.c(1028)dbLoadUsrCfgDea] find file /proc/cfg/db_backup_cfg.xml,and simp chk ok!
11930:23:03 [DB][Info] [dbc_core.c(878)dbEndTm] (dbFileLoadCfg) end, use 102 tick
11930:23:03 [DB][Info] [dbc_core.c(255)GetDefCfgId] GetDefCfgId return 1
11930:23:03 [DB][Info] [dbc_core.c(878)dbEndTm] (dbIFInfoInit) end, use 2 tick
11930:23:03 [DB][Info] [dbc_core.c(878)dbEndTm] (dbViewNameListInit) end, use 0 tick
11930:23:03 [DB][Info] [dbc_core.c(878)dbEndTm] (ALL) end, use 381 tick
11930:23:03 [OSS][Warn] [oss_sche.c(817)RunProcess] RunProcess process[DB] Event[0x1100] dwUsedTicks[486]
11930:23:04 [OSS][Warn] [oss_sche.c(817)RunProcess] RunProcess process[firewall] Event[0x1100] dwUsedTicks[398]
11930:23:04 [l2b_mgr][Info] [l2b_mgr.c(2925)l2bMgrInit] module init success!l2b mgr
11930:23:04 [qos_mgr][Info] [qos_mgr.c(479)QoSMain] Func Begin: QoSMain, wState 0, wMsgtype 1, wEvent 1100
11930:23:04 [qos_mgr][Info] [qos_mgr.c(538)QoSInit] Func Begin: QoSInit
11930:23:04 [qos_mgr][Info] [qos_mgr.c(564)QoSInit] Func End: QoSInit
11930:23:04 [qos_mgr][Info] [qos_mgr.c(522)QoSMain] Func End: QoSMain
11930:23:04 [dns_mgr][Info] [comp_dns_mgr.c(95)CompDnsInit] Init CompDns_Mgr Success!
11930:23:04 [sntp_mgr][Info] [sntp_mgr.c(1409)sntpInit] module init success!SNTP mgr
11930:23:04 [ddns_mgr][Info] [ddns_mgr.c(917)ddnsInit] module init success!ddns mgr
11930:23:04 [rip_mgr][Info] [rip_mgr.c(293)RipInit] Common Info: rip_mgr call init
11930:23:04 [auto_upgrade_mg][Info] [pdt_auto_upgrad(1862)AutoUpgradeMgrM] wState: 0, wEvent: 0x1100, wMsgtype: 1, wMsgLen: 0
11930:23:04 [fm_mgr][Info] [fm_mgr.c(2231)fmServerInit] module init success!Enter FmServer Init!
11930:23:04 [fm_mgr][Info] [fm_mgr.c(3767)fmMgrInit] module init success!fm mgr
11930:23:04 [dss][Warn] [dss_lla.c(944)DssLlaMain] The Dss' lpMsg is null.
11930:23:04 [dss][Info] [dss_lla.c(946)DssLlaMain] recv event(4352) msgptr((nil)) len(0)
11930:23:04 [dss][Info] [dss_lla.c(951)DssLlaMain] recv PowerOnEvent
11930:23:04 [dss][Info] [dss_lla.c(96)llaInit] LLA init success.
11930:23:04 [dss][Info] [dss_lla.c(998)DssLlaMain] dssLLAMgrMain end
11930:23:04 [dss][Info] [dss_dhcp6c.c(6739)DssDhcp6cMain] rcv unknown event[4352]
11930:23:04 [dss][Info] [dss_pdConf.c(1194)DSSPDConfMain] recv PowerOn
11930:23:04 [mirror_mgr][Info] [mirror_mgr.c(60)mirror_main] wEvent=0x1100, wMsgtype=1, wMsgLen=0, wState=0
11930:23:04 [tracert_mgr][Info] [tracert_mgr.c(572)tracertInit] module init success!tracert mgr
11930:23:05 [Tunnel_mgr][Info] [tunnel_mgr.c(1585)TunnelMain] wEvent=0x1100, wMsgType=1, wMsgLen=0, wState=0
11930:23:05 [tr143_mgr][Info] [tr143_mgr.c(418)tr143Init] module init success!tr143 mgr
11930:23:05 [ifs_mgr][Info] [ifs_phylinkdev.(385)addWandNotifier] Add Module(65795) attention WAND_ID() and WAND_Type(-1)
11930:23:05 [dhcp6s][Info] [dhcp6s_main.c(259)_dhcp6sIPv6Swit] Read IPv6 Switch status.
11930:23:05 [dhcp4c][Info] [dhcp4c_main.c(307)Dhcp4cMain] Register dhcp4c return[0]
11930:23:05 [dhcps][Info] [dhcpsinst.c(430)DHCPSInstStart] gDhcpCommParam.iRebootNak = 0
11930:23:05 [dhcp6s][Info] [dhcp6s_main.c(1820)loadDhcp6sInst] will loadDhcp6sInst
11930:23:05 [dhcp6s][Info] [dhcp6s_main.c(1766)read6sInstCfgFr] pt6sInst->t6sInstCfg.bEnable[1]
11930:23:05 [srm_mgr][Info] [srm_mgr.c(202)SrmInit] module init success!use SRM_DBVIEW data
11930:23:05 [dhcp4c][Info] [dhcp4c_adapter.(73)_dhcp4cAdaptorS] dhcp4c module start ,read config from DB.
11930:23:05 [dhcp6s][Info] [dhcp6s_main.c(1768)read6sInstCfgFr] pt6sInst->t6sInstCfg.wPrefer[7]
11930:23:05 [dhcp6s][Info] [dhcp6s_main.c(1770)read6sInstCfgFr] pt6sInst->t6sInstCfg.dwCflAddrHoldingTime[86400]
11930:23:05 [ifs_mgr][Info] [ifs_main.c(181)IfsGetUB] GetUB, t[52], s[52], r[PhyLinkDevNotifier], f[ifs_phylinkdev.c], l[405]
11930:23:05 [dhcp6s][Info] [dhcp6s_main.c(1771)read6sInstCfgFr] sz6sInstId[IGD.LD1.HostCfg]
11930:23:05 [ifs_mgr][Info] [ifs_notifier.c(131)addRegNotifier] Recv EV_IFS_REG_NOTIFIER Msg, [] [00010126]
11930:23:05 [dhcp6s][Info] [dhcp6s_main.c(1772)read6sInstCfgFr] ifId[IGD.LD1]
11930:23:05 [dhcp6s][Info] [dhcp6s_main.c(1792)read6sInstCfgFr] --------------add gt6sInstList.iCounts[1]------
11930:23:05 [ifs_mgr][Info] [ifs_main.c(181)IfsGetUB] GetUB, t[108], s[56], r[RegNotifier], f[ifs_notifier.c], l[155]
11930:23:05 [dhcp6s][Info] [dhcp6s_main.c(1836)loadDhcp6sInst] pt6sInst->sz6sInsId[IGD.LD1.HostCfg]
11930:23:05 [Klogfile][Info] [(2527)ProcLogConf] Set SaveEnable=0
11930:23:05 [dhcp6s][Info] [dhcp6s_lease.c(163)dhcp6sLeaseTabI] lease_init enter, init ipaddr list
11930:23:05 [dhcp6s][Info] [dhcp6s_lease.c(185)dhcp6sLeaseTabI] init lease hashtable ok, gt6sAssignedIpAddrList.iCounts[1]
11930:23:05 [dhcp6s][Info] [dhcp6s_main.c(1682)freeAllBinding] 6s[IGD.LD1.HostCfg] free All Binding
11930:23:05 [dhcp6s][Info] [dhcp6s_main.c(1688)freeAllBinding] 6s[IGD.LD1.HostCfg] free All Binding ok
11930:23:05 [dhcp6s][Info] [dhcp6s_lease.c(265)lease_cleanup] lease_cleanup enter, lease_cleanup ipaddr list
11930:23:05 [dhcp6s][Info] [dhcp6s_lease.c(218)lease_release] gt6sAssignedIpAddrList.tList is not zeror, counts[1]
11930:23:05 [dhcp6s][Info] [dhcp6s_lease.c(235)lease_release] find 6sinst[IGD.LD1.HostCfg] in gt6sAssignedIpAddrList.tList, count[5916004]
11930:23:05 [dhcp6s][Info] [dhcp6s_lease.c(241)lease_release] lease_release ok
11930:23:05 [dhcp6s][Info] [dhcp6s_main.c(1997)startDhcp6sInst] ----pt6sInst->tIfInfo.szIfId[IGD.LD1]----
11930:23:05 [dhcp6s][Info] [dhcp6s_main.c(2015)startDhcp6sInst] tRouteIfInfo.RealIFName[]
11930:23:05 [dhcp6s][Info] [dhcp6s_lease.c(163)dhcp6sLeaseTabI] lease_init enter, init ipaddr list
11930:23:05 [dhcp6s][Info] [dhcp6s_lease.c(185)dhcp6sLeaseTabI] init lease hashtable ok, gt6sAssignedIpAddrList.iCounts[1]Danke.
(Last edited by oo73 on 5 Oct 2016, 10:50)
Hi guys!
Maybe something can be cooked for DIR-850L?
CPU1: Realtek RTL8197D (660 MHz)
FLA1: 128 MiB (Spansion S34ML01G100TFI00)
RAM1: 128 MiB (Nanya NT5TU64M16CG-AC)
WI1 chip1: Realtek RTL8812AR
WI2 chip1: Realtek RTL8192CE
ETH chip1: Realtek RTL8197D
Switch: Realtek RTL8367RB
I have busybox access to dlink running firmware in case you need any output.
Best regards
Help me!!! I cant' compile!
target Realtek RTL8xxx
source:
#git clone git://git.advem.lv/openwrt-realtek.git
#cd ./openwrt-realtek/
#git checkout realtek
Version linux:
#cat /proc/version
Linux version 4.4.0-47-generic (buildd@lcy01-03) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #68-Ubuntu SMP Wed Oct 26 19:39:52 UTC 2016#make V=s
collect2: error: ld returned 1 exit status
Makefile:456: recipe for target 'testglib' failed
make[8]: *** [testglib] Error 1
make[8]: Leaving directory '/home/user/WRT/openwrt-realtek/build_dir/host/pkg-config-0.25/glib-1.2.10'
Makefile:531: recipe for target 'all-recursive' failed
make[7]: *** [all-recursive] Error 1
make[7]: Leaving directory '/home/user/WRT/openwrt-realtek/build_dir/host/pkg-config-0.25/glib-1.2.10'
Makefile:364: recipe for target 'all' failed
make[6]: *** [all] Error 2
make[6]: Leaving directory '/home/user/WRT/openwrt-realtek/build_dir/host/pkg-config-0.25/glib-1.2.10'
Makefile:536: recipe for target 'all-recursive' failed
make[5]: *** [all-recursive] Error 1
make[5]: Leaving directory '/home/user/WRT/openwrt-realtek/build_dir/host/pkg-config-0.25'
Makefile:309: recipe for target 'all' failed
make[4]: *** [all] Error 2
make[4]: Leaving directory '/home/user/WRT/openwrt-realtek/build_dir/host/pkg-config-0.25'
Makefile:34: recipe for target '/home/user/WRT/openwrt-realtek/build_dir/host/pkg-config-0.25/.built' failed
make[3]: *** [/home/user/WRT/openwrt-realtek/build_dir/host/pkg-config-0.25/.built] Error 2
make[3]: Leaving directory '/home/user/WRT/openwrt-realtek/tools/pkg-config'
tools/Makefile:149: recipe for target 'tools/pkg-config/compile' failed
make[2]: *** [tools/pkg-config/compile] Error 2
make[2]: Leaving directory '/home/user/WRT/openwrt-realtek'
tools/Makefile:148: recipe for target '/home/user/WRT/openwrt-realtek/staging_dir/target-mips_uClibc-0.9.33.2_lexra/stamp/.tools_install_nnnnn' failed
make[1]: *** [/home/user/WRT/openwrt-realtek/staging_dir/target-mips_uClibc-0.9.33.2_lexra/stamp/.tools_install_nnnnn] Error 2
make[1]: Leaving directory '/home/user/WRT/openwrt-realtek'Hi, guys!
I have a lot of staff of old routers! Most of them are with rtl8196c. I managed to compile u-boot with 16MB flash and USB support for ar7240's models (TP-Link WR740 N v1 - 2), but I'm not able to find any solution for rtl8196c with RTL8188RE and upgraded to 16MB flash with 64MB RAM. I have carefully read all the topics and threads in this forum but I don't find anything useful to do that (except different sources). A lot of people asks about Zyxel nbg 416N but still nothing. Please help me to find a solution! I would like to use OpenWRT 15.05.1 with USB mod for this router upgraded with 64MB RAM and 16MB Flash.
Hi
I have a Netis WF2780 which is basically the same (chipset) as Upvel, D-Link... mentioned above
I abandoned the attempts to build OpenWrt for it. Now I am trying to hack the Init scripts (bash /etc/profile in this case) and use exisiting executables but with a different configuration. I want to split br0 into two different subnets and (perhaps later) add some compiled executables of my own.
I managed to download the root squashfs, expand, modify and upload back. Now I want to attach a USB stick to speed-up developement. The board has a 2x6 header (empty holes) where I found the UART pins and the rest should be USB pins. So I ask if someone could help me to identify USB pins. Some other boards have the USB socket pads.
Someone with electronic skils please "ring" connections from USB socket to processor (RTL8197DN). They could be somwhere on the bottom side of the processor.
The second pin from the left is UART-Tx and the third is UART-Rx. But this is all I know.
Hello,
I have Trendnet TEW-651BR H\W ver. 2.3
FCC ID: XU8TEW651BRV2
CPU1: Realtek RTL8196C (390 MHz)
FLA1: 4 MiB (Macronix MX25L3206EM2I-12G)
RAM1: 32 MiB (ESMT M12L2561616A-6T)
WI1 chip1: Realtek RTL8188RE
Could I participate in testing OpenWRT?
Hi, I am trying to build OpenWRT for Netis WF2780. Unfortunately, I overwrote the flash without making a proper backup first. Could anyone please share a full flash dump? An Uplevel UR-825AC or D-link DIR-825 D1/E1/G1 dump might work too, at least to get recovery mode working.
Adrianp, can you please elaborate which pin is the serial transmit pin? And what speed does it use? I did not manage to make it work.
Here is my e-z flash setup, for inspiration. 2x6 header is visible in the picture:
i.imgur.com/rX5ARnc.jpg
(Last edited by turnip1 on 13 Mar 2017, 03:30)
Hello forum , I am following this 3d from long time now .
As many have understood Realtek has some lack in information and I didn't found not only a working sdk ( not from jwr2000 , neither WS-WN, neither dlink) always something is missing, always the addresses of the kernel and root and webpages are different one from other and we need to recompile the bootloader.
But I made an evaluation board, home made, where I can test as many firmwares I want in very few minutes, without the needing of solder and desolder.
ALL I NEED is a whole dump, bootloader included.
I have a netis wf 2411 rtl 8196c , 4 mega spi, 16 mega ram ,and rtl 8188 as wifi, as many thousand clones laying around.
On this board run smootly the netis firmware ( 4096 kb) , the WS-Wn 523 firmware ( only 2048 kb) and a brand called digitalline (4096 too ) firmware.
I programmed the spi, and voilà the router is booting even with 2 mega dump, even with 4 mega dump. All hardare is working perfectly, even if it seems to me that the WS-WN firmware has much wifi sensibility of others and the incredible is that WS-WN523 claims to have rtl 8196E but in real it boots on the rtl 8196C !
I was looking for a WS-WN513 whole dump but not able to find.
I have also tried a 8 mega spi flash and it boots perfectly even filled with the 2 mega dump.
So I have this starting points: the most usefull firmware is the netis one, they gave possibility to have static routing too, access point, client , repeater, but also client-repeater at the same time, and with two different ssid, one for joining the access point, one for local use. Very incredible features !!
Now comes the question: instead of killing ourselfes in the hope of openwrt port, is anybody capable of hacking the original firmware for adding new features?
Do you believe is possible to hack the root fs and add dropbear for ssh access, scp for manipulating files, vim editor?
i would like so much to use those routers in routed way, not natted way and have direct access to iptables configuration.
And no matter is the size of root increase i have seen that the processor boots even the 8 mega spi , is just important that the rootfs doesn't overwrites other vitals part of the rom.
so let's give a try.
I am very able with soldering-desoldering, but less with programming so if somebody interested into try but not have hardware, here I am
Fabio
P.S. if someone have FULL DUMP of any rtl8196c with rtl 8188 wifi ( 2 or 4 mega no matter) and want to share for having a database collection, fell free to contact. I will try on my evaluation board if it boots regularly)
OR if someone has a full dump of an opewrt working on rtl 8196C/E , even without luci to test on this universal rtl board
(Last edited by fabiobassa on 7 May 2017, 18:28)
Page 12 of 13