and here is something that i am cooking, not tested yet, only need to figure the reset button now
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -858,6 +858,126 @@ static struct board_info __initdata boar
},
},
};
+
+/* Sky Sagemcom F@ST2304 ADSL Router
+ * with unpopulated USB Port, 4 LAN Ports, WIFI
+ */
+static struct board_info __initdata board_FAST2304 = {
+ .name = "F@ST2304",
+ .expected_cpu_id = 0x6328,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .has_usbd = 1,
+
+ .has_enetsw = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .leds = {
+ /* front LEDs */
+ {
+ .name = "F@ST2304:green:power",
+ .gpio = 8,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "F@ST2304:orange:power",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "F@ST2304:orange:diag",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ {
+ .name = "F@ST2304:green:diag",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "F@ST2304:green:wlan",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "F@ST2304:red:inet",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "F@ST2304:green:inet",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ {
+ .name = "F@ST2304:orange:inet",
+ .gpio = 5,
+ .active_low = 1,
+ },
+
+ /* LAN LEDs */
+ {
+ .name = "F@ST2304:green:port1",
+ .gpio = 17,
+ .active_low = 1,
+ },
+ {
+ .name = "F@ST2304:green:port2",
+ .gpio = 18,
+ .active_low = 1,
+ },
+ {
+ .name = "F@ST2304:green:port3",
+ .gpio = 19,
+ .active_low = 1,
+ },
+ {
+ .name = "F@ST2304:green:port4",
+ .gpio = 20,
+ .active_low = 1,
+ },
+ },
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 23, // ??? find out ???
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
+
+
#endif
/*
@@ -5252,6 +5372,7 @@ static const struct board_info __initcon
&board_A4001N1,
&board_dsl_274xb_f1,
&board_FAST2704V2,
+ &board_FAST2304,
#endif
#ifdef CONFIG_BCM63XX_CPU_6338
&board_96338gw,