OpenWrt Forum Archive

Topic: Blueendless U25AWF - MT7620 Travel Router with Battery and HDD

The content of this topic has been archived between 23 Apr 2018 and 6 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Kh_Shad wrote:

[   41.070000] RXIQ Sigma_i=963, Sigma_q=959, R_iq=-2800
[   41.140000] RXIQ calibration FAIL

this always fails in ralink driver output, maybe because they blindly "enable" something, in our case https://github.com/i80s/mtk-sources/blo … 52.c#L5102

it also fails in openwrt if stick to their code, unless you comment it out: https://github.com/psyborg55/openwrt/bl … b.c#L10579

then it actually works for both chains upon boot if leave amplifier configured as is. reconfiguring wifi settings makes this calibration always fail on chain 1

alex2104 wrote:

I received from friends from China new firmware 1.4.0. But the works also. Speed WiFi 1,5 Mb/s


Hi alex

Is it possible to share the new firmware that you receive ?

thanks

arvati wrote:

Dear danman, would be possible to share patch and config files to recompile your work with some small changes I wonder to make?

arvati, you can find latest patches here: https://github.com/danielkucera/source/tree/u25awf

Hi, kimax app will not send identification code to my phone sms what can I do?

Hi guys, I need help alot. I updated u25awf with some file. But after it i cant see kimax in wifi list. Help. What do i do now? Only green light on. How i upgrade with right files again without wifi.

(Last edited by ganzo8247 on 1 Mar 2018, 13:22)

i cant see kimax in wifi list ...
can you connect with lan ?

u25awf with some file
files ??

if yes for wifi use putty -> ssh

command for start wifi :
uci set wireless.@wifi-device[0].disabled=0; uci commit wireless; wifi

(Last edited by F5BJR on 1 Mar 2018, 19:07)

Thank u alot f5... finally i flashed with  openwrt-ramips-mt7620-u25awf-h1-squashfs-sysupgrade.bin. Now i have another problem. Is there no WEBui interface? how i configure my device? when i try connect 192.168.1.1 error : refused to connect
update: how i update opkg offline
update: f5 i think i and you botch have same device. Do you have good firmware? Your last uploaded is deleted
update: i cant mount hdd, i tried format hdd fat32.exfat. ntfs. But still not mounting. But when i connect with usb it works fine.
Update: i need help to mount hdd

(Last edited by ganzo8247 on 2 Mar 2018, 18:47)

Thank you. I have bs-u25awf hdd enclosure. I try your firmware. And i need help mount hdd.
UPDATE: I installed ur firmware. It works great but still cant mount hdd. help me,
update:
here is my dmesg:

root@OpenWrt:~# dmesg
[    0.000000] Linux version 4.9.82 (courtois@debian) (gcc version 5.5.0 (OpenWr                                                                             t GCC 5.5.0 r6320-fc54256bc8) ) #0 Mon Feb 26 16:52:15 2018
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[    0.000000] MIPS: machine is Kimax U25AWF-H1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt                                                                             es
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 803f8ef4, node_mem_map 8100002                                                                             0
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag                                                                             es: 32512
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs                                                                             2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=0006c7ba
[    0.000000] Readback ErrCtl register=0006c7ba
[    0.000000] Memory: 125340K/131072K available (3160K kernel code, 156K rwdata                                                                             , 756K rodata, 208K init, 217K bss, 5732K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 580MHz
[    0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_n                                                                             s: 583261500 ns
[    0.000000] systick: enable autosleep mode
[    0.000000] systick: running - mult: 214748, shift: 32
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_i                                                                             dle_ns: 6590553264 ns
[    0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 74051                                                                             15902ns
[    0.015457] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.080609] pid_max: default: 32768 minimum: 301
[    0.089916] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102945] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.123545] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                                                             x_idle_ns: 19112604462750000 ns
[    0.143030] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.155177] pinctrl core: initialized pinctrl subsystem
[    0.166148] NET: Registered protocol family 16
[    0.196946] rt2880_gpio 10000600.gpio: registering 24 gpios
[    0.207975] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[    0.220554] rt2880_gpio 10000660.gpio: registering 32 gpios
[    0.231552] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[    0.244103] rt2880_gpio 10000688.gpio: registering 1 gpios
[    0.254917] rt2880_gpio 10000688.gpio: registering 1 irq handlers
[    0.270839] clocksource: Switched to clocksource systick
[    0.282585] NET: Registered protocol family 2
[    0.292078] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.305853] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.318449] TCP: Hash tables configured (established 1024 bind 1024)
[    0.331174] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.342703] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.355390] NET: Registered protocol family 1
[    0.363967] PCI: CLS 0 bytes, default 32
[    0.366311] rt-timer 10000100.timer: maximum frequency is 1220Hz
[    0.379009] Crashlog allocated RAM at address 0x3f00000
[    0.390487] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.411521] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.423003] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT                                                                             Y) (c) 2001-2006 Red Hat, Inc.
[    0.451405] io scheduler noop registered
[    0.459048] io scheduler deadline registered (default)
[    0.469613] ralink-usb-phy usbphy: invalid resource
[    0.479767] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.493412] console [ttyS0] disabled
[    0.500404] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud                                                                              = 2500000) is a Palmchip BK-3103
[    0.520177] console [ttyS0] enabled
[    0.533953] bootconsole [early0] disabled
[    0.554278] spi spi0.0: force spi mode3
[    0.562795] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[    0.572958] 4 ofpart partitions found on MTD device spi0.0
[    0.583891] Creating 4 MTD partitions on "spi0.0":
[    0.593452] 0x000000000000-0x000000030000 : "u-boot"
[    0.605053] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.617588] 0x000000040000-0x000000050000 : "factory"
[    0.629592] 0x000000050000-0x000001000000 : "firmware"
[    0.727750] 2 uimage-fw partitions found on MTD device firmware
[    0.739592] 0x000000050000-0x00000019bda8 : "kernel"
[    0.751242] 0x00000019bda8-0x000001000000 : "rootfs"
[    0.763001] mtd: device 5 (rootfs) set to be root filesystem
[    0.774930] 1 squashfs-split partitions found on MTD device rootfs
[    0.787316] 0x0000007c0000-0x000001000000 : "rootfs_data"
[    0.800323] libphy: Fixed MDIO Bus: probed
[    0.812200] gsw: setting port4 to ephy mode
[    0.820577] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 4 link u                                                                             p (100Mbps/Full duplex)
[    0.839026] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
[    0.851696] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0                                                                             100000, irq 5
[    0.868728] rt2880_wdt 10000120.watchdog: Initialized
[    0.879958] NET: Registered protocol family 10
[    0.891994] NET: Registered protocol family 17
[    0.900977] 8021q: 802.1Q VLAN Support v1.8
[    0.921780] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    0.936988] Freeing unused kernel memory: 208K
[    0.945871] This architecture does not have kernel memory protection.
[    2.403893] init: Console is alive
[    2.410977] init: - watchdog -
[    2.530802] random: fast init done
[    6.450295] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    6.794269] usbcore: registered new interface driver usbfs
[    6.805399] usbcore: registered new interface driver hub
[    6.816123] usbcore: registered new device driver usb
[    6.858983] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.881381] SCSI subsystem initialized
[    6.894352] ehci-platform: EHCI generic platform driver
[    6.915157] phy phy-usbphy.0: remote usb device wakeup disabled
[    6.926967] phy phy-usbphy.0: UTMI 16bit 30MHz
[    6.935860] ehci-platform 101c0000.ehci: EHCI Host Controller
[    6.947352] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus                                                                              number 1
[    6.963264] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[    6.984479] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[    6.998078] hub 1-0:1.0: USB hub found
[    7.005952] hub 1-0:1.0: 1 port detected
[    7.015860] ehci-pci: EHCI PCI platform driver
[    7.028085] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.042071] ohci-platform: OHCI generic platform driver
[    7.052838] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[    7.066427] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus                                                                              number 2
[    7.082341] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[    7.123447] hub 2-0:1.0: USB hub found
[    7.131354] hub 2-0:1.0: 1 port detected
[    7.142091] uhci_hcd: USB Universal Host Controller Interface driver
[    7.172557] usbcore: registered new interface driver usb-storage
[    7.185318] kmodloader: done loading kernel modules from /etc/modules-boot.d/                                                                             *
[    7.203885] init: - preinit -
[    9.794757] 8021q: adding VLAN 0 to HW filter on device eth0
[   11.196742] mount_root: loading kmods from internal overlay
[   11.276234] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[   11.292017] kmodloader: done loading kernel modules from //etc/modules-boot.d                                                                             /*
[   13.749852] jffs2: notice: (373) jffs2_build_xattr_subsystem: complete buildi                                                                             ng xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0                                                                              orphan) found.
[   13.781568] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   13.811667] block: extroot: not configured
[   14.073788] jffs2: notice: (370) jffs2_build_xattr_subsystem: complete buildi                                                                             ng xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0                                                                              orphan) found.
[   15.688203] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   15.717478] block: extroot: not configured
[   15.727121] mount_root: switching to jffs2 overlay
[   15.808983] urandom-seed: Seeding with /etc/urandom.seed
[   15.923618] procd: - early -
[   15.929452] procd: - watchdog -
[   16.651965] procd: - watchdog -
[   16.663220] procd: - ubus -
[   16.854599] procd: - init -
[   17.478866] kmodloader: loading kernel modules from /etc/modules.d/*
[   17.558894] ipip: IPv4 and MPLS over IPv4 tunneling driver
[   17.598557] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   17.668136] Netfilter messages via NETLINK v0.30.
[   17.681539] ip_set: protocol 6
[   17.736135] fuse init (API version 7.26)
[   17.753309] usbcore: registered new interface driver cdc_wdm
[   17.767129] Loading modules backported from Linux version wt-2017-11-01-0-gfe                                                                             248fc2c180
[   17.783160] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[   17.803325] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.830109] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[   17.845882] nf_conntrack_rtsp v0.7 loading
[   17.935167] nf_nat_rtsp v0.7 loading
[   17.953106] usbcore: registered new interface driver ums-alauda
[   17.967744] usbcore: registered new interface driver ums-cypress
[   17.982653] usbcore: registered new interface driver ums-datafab
[   17.997319] usbcore: registered new interface driver ums-freecom
[   18.012164] usbcore: registered new interface driver ums-isd200
[   18.027006] usbcore: registered new interface driver ums-jumpshot
[   18.041878] usbcore: registered new interface driver ums-karma
[   18.057104] usbcore: registered new interface driver ums-sddr09
[   18.071808] usbcore: registered new interface driver ums-sddr55
[   18.086852] usbcore: registered new interface driver ums-usbat
[   18.101904] usbcore: registered new interface driver usblp
[   18.127775] usbcore: registered new interface driver usbserial
[   18.139559] usbcore: registered new interface driver usbserial_generic
[   18.152719] usbserial: USB Serial support registered for generic
[   18.216311] xt_time: kernel timezone is -0000
[   18.229984] usbcore: registered new interface driver cdc_ether
[   18.443541] PPP generic driver version 2.4.2
[   18.455354] NET: Registered protocol family 24
[   18.467894] usbcore: registered new interface driver qmi_wwan
[   18.483777] usbcore: registered new interface driver rndis_host
[   18.516225] usbcore: registered new interface driver sierra_net
[   18.536076] usbcore: registered new interface driver option
[   18.547380] usbserial: USB Serial support registered for GSM modem (1-port)
[   18.590969] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory                                                                             "
[   18.605466] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 d                                                                             etected
[   18.620924] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
[   18.635342] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   18.720802] kmodloader: done loading kernel modules from /etc/modules.d/*
[   27.875620] 8021q: adding VLAN 0 to HW filter on device eth0
[   27.918299] br-lan: port 1(eth0) entered blocking state
[   27.928809] br-lan: port 1(eth0) entered disabled state
[   27.939693] device eth0 entered promiscuous mode
[   28.034235] br-lan: port 1(eth0) entered blocking state
[   28.044717] br-lan: port 1(eth0) entered forwarding state
[   28.055897] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   30.636716] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   35.711680] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
[   35.754666] br-lan: port 2(wlan0-1) entered blocking state
[   35.765692] br-lan: port 2(wlan0-1) entered disabled state
[   35.777087] device wlan0-1 entered promiscuous mode
[   36.312597] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   39.897565] wlan0: authenticate with ec:08:6b:4a:b9:ba
[   39.975784] wlan0: send auth to ec:08:6b:4a:b9:ba (try 1/3)
[   39.989545] wlan0: authenticated
[   40.022902] wlan0: associate with ec:08:6b:4a:b9:ba (try 1/3)
[   40.059320] wlan0: RX AssocResp from ec:08:6b:4a:b9:ba (capab=0x431 status=0                                                                              aid=7)
[   40.074940] wlan0: associated
[   41.051254] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   42.463189] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[   42.476460] br-lan: port 2(wlan0-1) entered blocking state
[   42.487432] br-lan: port 2(wlan0-1) entered forwarding state
[   59.880857] random: crng init done
[  312.137141] br-lan: port 2(wlan0-1) entered disabled state
[  315.441810] wlan0: authenticate with ec:08:6b:4a:b9:ba
[  315.461647] wlan0: send auth to ec:08:6b:4a:b9:ba (try 1/3)
[  315.473991] wlan0: authenticated
[  315.484323] wlan0: associate with ec:08:6b:4a:b9:ba (try 1/3)
[  315.497256] wlan0: RX AssocResp from ec:08:6b:4a:b9:ba (capab=0x431 status=0                                                                              aid=7)
[  315.512847] wlan0: associated
[  315.534360] br-lan: port 2(wlan0-1) entered blocking state
[  315.545358] br-lan: port 2(wlan0-1) entered forwarding state

(Last edited by ganzo8247 on 3 Mar 2018, 09:48)

F5.. Can u compile for me with all sata hdd enabled in kernel mode ?

compile for what ?

no problem with internal SATA hdd

F5BJR wrote:

compile for what ?

no problem with internal SATA hdd

My problem is my device not detect sata hdd. blkid shows nothing. fdisk -l not shows. I compiled with most hdd packages, still not recognise. I hope u can help me.

(Last edited by ganzo8247 on 6 Mar 2018, 10:57)

here is my config seed

CONFIG_TARGET_ramips=y
CONFIG_TARGET_ramips_mt7620=y
CONFIG_TARGET_ramips_mt7620_DEVICE_u25awf-h1=y
CONFIG_PACKAGE_NTFS-3G_USE_LIBFUSE=y
CONFIG_PACKAGE_SAMBA_MAX_DEBUG_LEVEL=-1
CONFIG_PACKAGE_ahcpd=y
CONFIG_PACKAGE_blkdiscard=y
CONFIG_PACKAGE_blkid=y
CONFIG_PACKAGE_block-mount=y
CONFIG_PACKAGE_blockd=y
CONFIG_PACKAGE_cfdisk=y
CONFIG_PACKAGE_chat=y
CONFIG_PACKAGE_comgt=y
CONFIG_PACKAGE_ddns-scripts=y
CONFIG_PACKAGE_dmesg=y
CONFIG_PACKAGE_e2fsprogs=y
CONFIG_PACKAGE_fdisk=y
CONFIG_PACKAGE_findfs=y
CONFIG_PACKAGE_hd-idle=y
CONFIG_PACKAGE_hdparm=y
CONFIG_PACKAGE_ipip=y
CONFIG_PACKAGE_kmod-ata-ahci=y
CONFIG_PACKAGE_kmod-ata-core=y
CONFIG_PACKAGE_kmod-ata-marvell-sata=y
CONFIG_PACKAGE_kmod-ata-nvidia-sata=y
CONFIG_PACKAGE_kmod-ata-sil=y
CONFIG_PACKAGE_kmod-ata-sil24=y
CONFIG_PACKAGE_kmod-ata-via-sata=y
CONFIG_PACKAGE_kmod-crypto-crc32c=y
CONFIG_PACKAGE_kmod-crypto-hash=y
CONFIG_PACKAGE_kmod-fs-autofs4=y
CONFIG_PACKAGE_kmod-fs-ext4=y
CONFIG_PACKAGE_kmod-fs-ntfs=y
CONFIG_PACKAGE_kmod-fs-vfat=y
CONFIG_PACKAGE_kmod-fuse=y
CONFIG_PACKAGE_kmod-gpio-dev=y
CONFIG_PACKAGE_kmod-ipip=y
CONFIG_PACKAGE_kmod-ipt-compat-xtables=y
CONFIG_PACKAGE_kmod-ipt-conntrack-extra=y
CONFIG_PACKAGE_kmod-ipt-filter=y
CONFIG_PACKAGE_kmod-ipt-hashlimit=y
CONFIG_PACKAGE_kmod-ipt-iface=y
CONFIG_PACKAGE_kmod-ipt-ipmark=y
CONFIG_PACKAGE_kmod-ipt-ipopt=y
CONFIG_PACKAGE_kmod-ipt-ipset=y
CONFIG_PACKAGE_kmod-ipt-nat-extra=y
CONFIG_PACKAGE_kmod-ipt-nathelper-rtsp=y
CONFIG_PACKAGE_kmod-ipt-u32=y
CONFIG_PACKAGE_kmod-iptunnel=y
CONFIG_PACKAGE_kmod-iptunnel4=y
CONFIG_PACKAGE_kmod-iptunnel6=y
CONFIG_PACKAGE_kmod-lib-crc16=y
CONFIG_PACKAGE_kmod-lib-textsearch=y
CONFIG_PACKAGE_kmod-mii=y
CONFIG_PACKAGE_kmod-nfnetlink=y
CONFIG_PACKAGE_kmod-nls-base=y
CONFIG_PACKAGE_kmod-nls-cp437=y
CONFIG_PACKAGE_kmod-nls-iso8859-1=y
CONFIG_PACKAGE_kmod-nls-utf8=y
CONFIG_PACKAGE_kmod-scsi-core=y
CONFIG_PACKAGE_kmod-scsi-generic=y
CONFIG_PACKAGE_kmod-usb-core=y
CONFIG_PACKAGE_kmod-usb-ehci=y
CONFIG_PACKAGE_kmod-usb-net=y
CONFIG_PACKAGE_kmod-usb-net-cdc-ether=y
CONFIG_PACKAGE_kmod-usb-net-qmi-wwan=y
CONFIG_PACKAGE_kmod-usb-net-rndis=y
CONFIG_PACKAGE_kmod-usb-net-sierrawireless=y
CONFIG_PACKAGE_kmod-usb-ohci=y
CONFIG_PACKAGE_kmod-usb-ohci-pci=y
CONFIG_PACKAGE_kmod-usb-printer=y
CONFIG_PACKAGE_kmod-usb-serial=y
CONFIG_PACKAGE_kmod-usb-serial-option=y
CONFIG_PACKAGE_kmod-usb-serial-wwan=y
CONFIG_PACKAGE_kmod-usb-storage=y
CONFIG_PACKAGE_kmod-usb-storage-extras=y
CONFIG_PACKAGE_kmod-usb-uhci=y
CONFIG_PACKAGE_kmod-usb-wdm=y
CONFIG_PACKAGE_kmod-usb2=y
CONFIG_PACKAGE_kmod-usb2-pci=y
CONFIG_PACKAGE_kmod-usb3=y
CONFIG_PACKAGE_libblkid=y
CONFIG_PACKAGE_libbz2=y
CONFIG_PACKAGE_libexif=y
CONFIG_PACKAGE_libext2fs=y
CONFIG_PACKAGE_libfdisk=y
CONFIG_PACKAGE_libfuse=y
CONFIG_PACKAGE_libiwinfo-lua=y
CONFIG_PACKAGE_liblua=y
CONFIG_PACKAGE_libmount=y
CONFIG_PACKAGE_libncurses=y
CONFIG_PACKAGE_libogg=y
CONFIG_PACKAGE_librt=y
CONFIG_PACKAGE_libsmartcols=y
CONFIG_PACKAGE_libsqlite3=y
CONFIG_PACKAGE_libubus-lua=y
CONFIG_PACKAGE_libuci-lua=y
CONFIG_PACKAGE_libusb-1.0=y
CONFIG_PACKAGE_libuuid=y
CONFIG_PACKAGE_libvorbis=y
CONFIG_PACKAGE_lua=y
CONFIG_PACKAGE_luci=y
CONFIG_PACKAGE_luci-app-ahcp=y
CONFIG_PACKAGE_luci-app-ddns=y
CONFIG_PACKAGE_luci-app-firewall=y
CONFIG_PACKAGE_luci-app-hd-idle=y
CONFIG_PACKAGE_luci-app-p910nd=y
CONFIG_PACKAGE_luci-app-samba=y
CONFIG_PACKAGE_luci-app-upnp=y
CONFIG_PACKAGE_luci-base=y
CONFIG_PACKAGE_luci-lib-httpclient=y
CONFIG_PACKAGE_luci-lib-ip=y
CONFIG_PACKAGE_luci-lib-json=y
CONFIG_PACKAGE_luci-lib-jsonc=y
CONFIG_PACKAGE_luci-lib-nixio=y
CONFIG_PACKAGE_luci-mod-admin-full=y
CONFIG_PACKAGE_luci-proto-3g=y
CONFIG_PACKAGE_luci-proto-ipip=y
CONFIG_PACKAGE_luci-proto-ipv6=y
CONFIG_PACKAGE_luci-proto-ppp=y
CONFIG_PACKAGE_luci-proto-relay=y
CONFIG_PACKAGE_luci-theme-bootstrap=y
CONFIG_PACKAGE_luci-theme-material=y
CONFIG_PACKAGE_miniupnpd=y
CONFIG_PACKAGE_ntfs-3g=y
CONFIG_PACKAGE_p910nd=y
CONFIG_PACKAGE_partx-utils=y
CONFIG_PACKAGE_relayd=y
CONFIG_PACKAGE_resolveip=y
CONFIG_PACKAGE_rpcd=y
CONFIG_PACKAGE_rpcd-mod-rrdns=y
CONFIG_PACKAGE_samba36-server=y
CONFIG_PACKAGE_sfdisk=y
CONFIG_PACKAGE_terminfo=y
CONFIG_PACKAGE_uhttpd=y
CONFIG_PACKAGE_uhttpd-mod-ubus=y
CONFIG_PACKAGE_usbutils=y
CONFIG_SQLITE_FTS3=y
CONFIG_SQLITE_RTREE=y

Test with only charger cable ...

I accidentally flashed openwrt-ramips-mt7620-u25awf-h1-squashfs-sysupgrade.bin.
It should have been: openwrt-ramips-mt7620-u25awf-squashfs-sysupgrade.bin

How can I resolve this?

I can connect over SSH to 192.168.1.1.

(Last edited by cariba on 30 Mar 2018, 01:57)

If you can connect with SSH ( 192.168.1.1 )

1 - place a good firmware in a folder with SCP

2 - start SSH

3 - cd in the firmware folder

4 - run -> mtd write "name of the good  firmware" firmware ( firmware for the BS-U25 is mtd3 )
after some minutes you have a prompt if the file transfert is finished

5 - run ->  firstboot -> yes

6 - run -> reboot

(Last edited by F5BJR on 31 Mar 2018, 11:49)

Thanks alot F5BJR!

I flashed danman's firmware and it works. But it's on battery only and it doesn't see my drive. It's NTFS formatted. What should I do to get it automatically.

In that firmware there is also no fdisk command. In /dev I see an entry /sda1.

I can get it mounted by entering:  mount -t ntfs /dev/sda1 /mnt/shares

Is it possible for OpenWrt to automount this or something?

(Last edited by cariba on 31 Mar 2018, 00:19)

cariba ->

You have exactly what box ? BS-U25AWF-H1 ?

For danman firmware which version , link ?

For ntfs use ntfs-3g ( read & write)

I have compiled last day a firmware for BS-U25AWF-H1 with luci , ntfs , vfat , dlna , p910nd ( usb printer ) and more

http://www.mediafire.com/file/72bn1e9m7 … pgrade.bin

(Last edited by F5BJR on 31 Mar 2018, 12:02)

@F5BJR I don't have the H1. I have the BS-U25AWF.

I used this firmware from danman: /viewtopic.php?pid=351499#p351499 (one page back in this thread).

So I need to go and compile myself?

For comilation :

git clone https://github.com/openwrt/openwrt.git

After :
scripts/feeds uninstall freeswitch
git pull
scripts/feeds update -a
scripts/feeds install -a
make menuconfig

Quick Image Builder :
https://openwrt.org/docs/guide-develope … ild-images

--

Patch for BS-U25AWF
https://github.com/lede-project/source/ … era:u25awf

Edit the 7 files modified by daniel kucera
remove tmp folder
make menuconfig -> tag BS-U25AWF (16 MB )
make -j4

I have modified the 7 files and i compile at this time

https://drive.google.com/file/d/1eIfj6s … sp=sharing

after mtd write "the BS-U25AWF firmware" firmware  no problem run also with my BS-U25AWF-H1
box is with a new model name !!

Kimax U-25AWF
Version du micrologiciel OpenWrt SNAPSHOT r6567-db893ec7f0 / LuCI Master (git-18.088.49307-90ed423) 
Version du noyau 4.9.87

(Last edited by F5BJR on 31 Mar 2018, 14:20)

F5BJR. I installed your image. It's awesome! You are my hero!!

Ah I need to enable automount and after that I can share files! Awesome!!!!

Thanks a lot!

(Last edited by cariba on 31 Mar 2018, 17:45)

The discussion might have continued from here.