makedir-
My WRT1200ACv1 is still running the last test.sh script. That seems fine so far. A strange thing is the test.sh now has a higher process number than the sleep 5. I imagine that is temporary.
My memory usage is still normal the same as yours. The swap file problem is still mysterious. I expect that should only happen when the memory is completely used so testing that response could give some good clues. I have been working on other projects recently so don't have a solution for the bad swap.
Maybe somebody else has experience with the tiny proxy. The crash because of a URL entry might be related to your complicated networking setup and that is way beyond my simplification oriented experience. Or maybe the URL was a really bad web page running some malicious or inefficient script. There are too many of those in my opinion.
EDIT: I have never had a spontaneous reboot with this setup that I know about. The router typically just gets a manual reboot when the ISP is having problems to make sure the ISP is the cause. That hasn't happened recently.
My super simple setup is doing fine:
BusyBox v1.27.2 () built-in shell (ash)
_________
/ /\ _ ___ ___ ___
/ LE / \ | | | __| \| __|
/ DE / \ | |__| _|| |) | _|
/________/ LE \ |____|___|___/|___| lede-project.org
\ \ DE /
\ LE \ / -----------------------------------------------------------
\ DE \ / Reboot (SNAPSHOT, r4901-ab26fc6c8d)
\________\/ -----------------------------------------------------------
root@LEDE:~# uptime
18:31:14 up 44 days, 12:24, load average: 0.00, 0.00, 0.00
root@LEDE:~# free
total used free shared buffers cached
Mem: 513080 81960 431120 1932 6260 22912
-/+ buffers/cache: 52788 460292
Swap: 0 0 0
root@LEDE:~# ps ax
PID TTY STAT TIME COMMAND
1287 ? S 0:12 /sbin/logd -S 64
1296 ? S 0:05 /sbin/rpcd
1302 ? S 14:53 /usr/sbin/haveged -w 1024 -d 32 -i 32 -v 1
1366 ? S 2:57 /sbin/netifd
1440 ? S 1:52 /usr/sbin/odhcpd
1500 ? S 0:00 udhcpc -p /var/run/udhcpc-eth1.2.pid -s /lib/netifd/dhcp.script -f -t 0 -i eth1.2 -C -O 121
1722 ? S 0:00 /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 192.168.1.1:22 -p fded:3f9e:84c7::1:22 -
2570 ? Ss 0:00 /usr/sbin/smbd -F
2571 ? Ss 0:42 /usr/sbin/nmbd -F
2841 ? S 0:08 /usr/sbin/igmpproxy /var/etc/igmpproxy.conf
6319 ? S 0:00 [kworker/1:2]
6808 ? S 0:00 [kworker/1:0]
6898 ? Ss 0:00 /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 192.168.1.1:22 -p fded:3f9e:84c7::1:22 -
6907 pts/1 Ss 0:00 -ash
6948 ? S 0:00 sleep 5
6949 pts/1 R+ 0:00 ps ax
7558 ? S 0:29 /bin/sh ./test.sh
8499 ? Ss 4:54 /usr/sbin/hostapd -s -P /var/run/wifi-phy0.pid -B /var/run/hostapd-phy0.conf
9537 ? S 0:01 /usr/sbin/collectd -f
9692 ? S 1:32 [kworker/0:1]
11489 ? S 0:02 [kworker/1:1]
14017 ? S< 0:00 /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 131.216.7.120 -p 131.216.7.51 -p 1.lede.po
16356 ? S 1:34 /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg02411c -k -x /var/run/dnsmasq/dnsmasq.cfg02411
20010 ? S 0:09 /usr/sbin/uhttpd -f -h /www -r LEDE -x /cgi-bin -u /ubus -t 60 -T 30 -k 20 -A 1 -n 3 -N 100
22618 ? S 25:52 /usr/sbin/snmpd -Lf /dev/null -f
25212 ? S 0:00 [kworker/u4:1]
25247 ? S 0:03 [kworker/u4:2]
26118 ? SL 0:07 /usr/sbin/dnscrypt-proxy /var/etc/dnscrypt-proxy-ns1.conf
27262 ? S 2:39 [kworker/0:0]
27315 ? Ss 10:29 /usr/sbin/hostapd -s -P /var/run/wifi-phy1.pid -B /var/run/hostapd-phy1.conf
root@LEDE:~# dmesg | tail
[989481.051522] ieee80211 phy0: change: 0x40
[989481.282934] ieee80211 phy0: change: 0x40
[989481.422962] br-lan: port 2(wlan0) entered disabled state
[989481.502941] ieee80211 phy0: change: 0x100
[989481.576731] ieee80211 phy0: change: 0x100
[989481.585751] ieee80211 phy0: change: 0x42
[989481.758941] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[989481.765489] br-lan: port 2(wlan0) entered blocking state
[989481.770917] br-lan: port 2(wlan0) entered forwarding state
[989481.867697] ieee80211 phy0: change: 0x20
root@LEDE:~# date
Sat Jan 20 18:32:35 PST 2018
root@LEDE:~# exit
Connection to 192.168.1.1 closed.
(Last edited by beginner67890 on 21 Jan 2018, 15:41)